Antioch, CA81 Sheet Metal Fabricators near you

Where do you need the sheet metal fabricator?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Antioch Sheet Metal Fabricators

Browse these sheet metal fabricators with great ratings from Thumbtack customers in Antioch.

Casiano's Handyman
4.5
from 166 reviews
  • 4 years in business
  • 260 hires on Thumbtack
Cody D.
Verified review

Ricardo did good work. He came in and fixed our disposal after fishing out a metal knife. He was here for 15 minutes, and the cost was pricier than the original proposal. A bit on the pricey side overall, but he left us with a working disposal.

Top Pro
  • 5 years in business
  • 80 hires on Thumbtack
  • Top Pro on Thumbtack
Carolyn D.
Verified review

Jasper did a fabulous job refinishing my wooden table. The job required him to make a number of visits to my home, he was always on time, very courteous and knowledgeable--I highly recommend him!

Weld Pro
4.6
from 30 reviews
  • 11 years in business
  • 46 hires on Thumbtack
Angela E.
Verified review

I had a job that needed to be completed before Christmas and am so very happy that Barry was the first person to respond. I had a heavy and big reclaimed beam that I wanted to "float" above my fireplace. It was a little bit of a complex engineering feat and thankfully Barry had come up with a perfect design to hold the weight of the beam and get the look that I was after. He customized the metal brace and was able to seamlessly recess the beam into the wall so that it looks like it's always been there. He, and his assistant, were able to come out the next day and complete the job in under 2 hours. They were awesome!! I will definitely work with them again.

Brothers Welding
4.6
from 29 reviews
  • 1 year in business
  • 28 hires on Thumbtack
Kevin G.
Verified review

Jose was able to do exactly as I asked (welding). It required some creativity to solve an issue with a metal gate and he was able to resolve. I'd recommend him for any welding job.

Dark Metal Machine Works
5.0
from 12 reviews
  • 6 years in business
  • 20 hires on Thumbtack
Luis A.
Verified review

I called Dark Metal and left a message. I was glad to have received a call back right away. I spoke with Joseph and when he came out to provide a quote, I showed him where I needed a custom cover to be placed over the hole where I have a sump pump. The open hole was a safety hazard. Joseph provided a very reasonable quote and, delivered the well crafted cover in a matter of days. Overall, it was great workmanship at a great price. I'll add that Joseph was great to work with too! A vey nice guy. I highly recommend Dark Metal Machine Works. -Luis A in Alameda

FMS Metal Works
5.0
from 4 reviews
  • 6 years in business
  • 3 hires on Thumbtack
Marc C.
Verified review

Matt at FMS Metal Works did a fine job from the start of the process of contacting me regarding the potential job to providing me with the proper paperwork for a job quote. The end product/project was more than satisfactory. Compared to the other bids I received from Thumbtack app he was very professional in promptly returning email/phone calls about the potential job. There were some welding vendors that did not return my inquiries about the possible project and one that wanted to start the job on the spot that day of the job quote without any type of job contract or he was not gonna do it at all. Be careful about vendors that do not want to provide you with a job estimate that both parties can agree on. Overall experience with FMS metal works was good. Will definitely do business again for future welding projects.

Nunes Welding & Fab Works
5.0
from 2 reviews
  • 1 hire on Thumbtack
Koslynn I.
Verified review

Tony did professional work repairing my car hauler.his welding skills are superb. I would recommend his work to anyone that needs any type of welding/fabrication work performed. Very pleasant to talk too and Tony is very flexable when it comes to work being performed and payment

  • 2 hires on Thumbtack
Liz W.
Verified review

Mark Miller and his team were great to work with. Thorough, concise and prompt. We would definitely recommend them to our friends and family.

Professional Iron Works
5.0
from 1 review
  • 32 years in business
  • 4 hires on Thumbtack
Peter O.
Verified review

Polite, professional and willing to do anything extra to complete a quality job.

West Bay Metal Works
5.0
from 1 review
  • 2 hires on Thumbtack
Lorraine S.
Verified review

Prompt friendly service door to door. No problems with time or cost.

About

Our shop has over 20 years of industry experience in the Bay Area, serving large-scale companies and consumers alike. We are experts in bringing your idea to life using the best materials and finishing techniques while remaining cost-effective.

About

I do custom fabrication and welding. I do painting and hauling, fence work, cleaning, yard work, pruning, carpentry, and Sheetrock. I do digging and am an all-around house guy. I am a hard worker and one who takes pride in his work.

About

I do design, fabrication and welding of various structures and components, arc, mig and tig welding of mild, chromoly, aluminum and stainless.

About

I am a maker, a designer, and a fabricator. * Soldering * Electromechanical assembly I provide custom fabrication of the following: * wood * metal * plastics

About

I weld and fabricate metal steel and aluminium. I take great pride in my work. I do other jobs too, like custom remodeling of baths, kitchens and additions.

  • 14 years in business
About

Bandy Industries is a family-owned company specializing in diesel/auto repairs, custom fabrications and welding. We have a reputation of doing honest work at honest prices.

About

Using all types of metal, Vaida creates contemporary and organic forms that are functional and sculptural pieces of art. Keeping his clients' personal aesthetics in mind, Vaida works to understand how his designs will be used and where they will be placed. Personality, function, and surroundings are key elements for designing pieces that will be enjoyed for a lifetime. Please contact Jamie Vaida, metal sculptor, with your private, commercial or public project commissions. Vaida works on steel, copper, brass, bronze and stainless.

About

I provide certified welding services in mig, tig, and stick welding. I also provide 24hr emergency services for agricultural needs and emergency security repairs. Don't settle for the garage repair welder! I'm your local, certified, professional fabricator. I can build gates fences, railings, trailers, car ports, metal buildings, and anything that you need welded.

About

I weld or fabricate anything. I specialize in building and designing go karts, mopeds, and exhaust pipes. I roll cages and rot iron gates, both decorative and ornamental.

About

ATR Welding Services and Solutions is your one-stop, on-site, and in-house welding shop. Our goal is to make sure our customers leave satisfied with a quality product. Our team specializes in custom welding, fabrication, and metal repairs. "We are a company where quality counts." If you dream it, we can build it! From big to small welding needs, give ATR a call. We offer the following welding and cutting processes listed below: * Gas metal arc welding (GMAW), sometimes referred to by its subtypes metal inert gas (MIG) welding or metal active gas (MAG) welding * Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding * Shielded metal arc welding (SMAW), also known as manual metal arc welding (MMA or MMAW), flux shielded arc welding or informally as stick welding * Flux-cored arc welding (FCAW or FCA) * Oxyfuel gas cutting * Plasma cutting

  • 25 years in business
About

Get adventures in welding. Learn how to weld from an AWS certified welder. Classes are held with 1 or 2 people, so you can get the most out of your training. This class will teach you the basics, so you can branch out on your own!

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

How long is welding training?

Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

How many types of welding are there?

Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

  • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
  • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
  • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
  • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
  • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

Where can I take welding classes?

Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

How much is welding training?

The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

Hire skilled professionals for absolutely everything.