Tell us what you need so we can bring you the right pros.
Receive quotes from pros who meet your needs.
Compare quotes, message pros, and hire when ready.
Mike welded casters to 11 shelving units. He showed up early, was very friendly and professional. He asked questions to make sure we were getting what we wanted. He even added on extra service and kept his pricing very reasonable. I would definitely recommend him for any general welding job, and will be using him again if we need other welding services done.
Thank God for Mr. Peacock. We had a serious problem that was left behind by the previous contractor. Five other contractors could not and would not fix the extensive trim problem on the the master bathroom, guest bathroom and the massive retaining walls behind the pool. Only one man and his team in Southern Cali could do that Job!! My hats off to Dave Peacock and the Stainless Genius team. The work is handcrafted, nothing "off the shelf here" and we are talking well over 200 feet of custom stainless steel trim on the exterior and interior. The work was not cheap but the price was fair and reasonable. We will have them back to do more!!
Charles is fantastic!! There are a bunch of welders and fabricators on Thumbtack, and I've talked with and used a few of them. Charles is BY FAR the best! If you have any welding or fabricating needs, call him first. He's the only call you'll have to make. Fantastic communication, fantastic work quality, fantastic response time. I am very relieved to have found my go-to welder, finally!
I have hired John Pino construction THREE TIMES. The first time was a small job in Murrieta to cut-back and re-build a corner overhang on the roof of my house so I could pull my RV up close to the side of the house. John performed that job quickly and easily and for a very fair price. When I needed some work done inside my Murrieta home, I did not hesitate to hire John Pino again. This was a bigger job involving moving a wall and creating custom inset cabinets around my fireplace. Once again, John's work was excellent and his price was fair. After my wife and I moved to Escondido, we kept in touch with John. When we decided to add-on to our home, we hired John Pino without hesitation. It was a truly large job, adding over 1,000 square feet to our hillside home in Hidden Meadows. It was a tricky addition over a steep slope. The new addition included a full wrap-around deck on the south the west sides. The west side deck was cantilevered. We also had John re-locate a stairwell and a laundry room in the older part of the home. It cost us $180,000 to do this. In comparison, the HUGE, well-advertised construction companies such as Lars and Marrokal estimated this job would be $225,000. I am an aerospace engineer and I love to work with my hands. Impressively, John allowed me to work with him when I was able to. He was even willing to teach me some new things. John is not the type of contractor to hire subcontractors, then take off and ignore them. John would always be right there working with them and monitoring the quality of their work. Especially impressive to me was a time I was home when a building inspector arrived. I talked with him just before he left and he raved about John's work. He told me that if all contractors did that quality of work, his job would be easier and more fun. He actually said to me, "I wish I could bring other contractors here to see what's been done as an example of what to do right!" It is now six years later and we still live in the same Hidden Meadows Escondido home and we LOVE the changes John made. It was excellent quality work that has stood the test of time so far.
Great work, quick reasonable..... Repair of steel gate that rusted
I hired Mo to come over and weld on a gooseneck adaptor to my 5th wheel trailer. he was prompt, reasonable and the workmanship was superb. i would hire him again for any welding job. i highly recommend him
I needed a custom roll cage built for my offroad vehicle so I contacted ProWeld One and am very impressed with owner Brandon's welding and fabrication skills. My project turned out even better than expected. There are not many fabricators who care about their work like Brandon does. I would definitely recommend ProWeld One for anyone wanting quality work done
Tony repaired our wood fence and did a great job. He came out promptly and gave us a quote and set a date and time for the repair. Everything went as he said it would. We would definitely recommend and use his services again.
Victor has done a great job for me on many projects from fabricating custom installs to simple iron repairs. He has a creative mind to help you through your project and make sure you get what you want. He is a great welder and craftsmen.
I called JC Welding`s to see about getting my bicycle frame welded. They said if I came by right away they could do it the same day. I arrived and the owner was nice enough to pull one of his welders off a project they were working on and weld my frame for me while I waited.
Jessie fabricated an obsolete steel bracket for my table saw. He used hardened steel for the job using the original bent bracket. I did have to modify the holes and bottom bracket a bit after he finished due to bent bracket he used for a template. He did offer to come over and help me modify the bracket as he too wanted it done right. His work was excellent! Straight welding clean work. I will have him weld for me again as he is conscientious about his work. Keith
He is a good welder he weld my aluminum trailer faster then I though and charge me less then others guys I call. He is also a good guy I recommend him he dose a good job
KR Fabrications- Kyle Rounds, is not only very percise but he is also very professional and always on time with his work. I am very pleased with the workmanship and quality I recieved from KR Fabrications. I would highly recommend them for any welding services you may need.
I have 10 years of experience in welding. I am certified by the American Welding Society and also in San Bernardino County. I carry an engine-driven welder and could weld anywhere from stick electrode to wire welding. Call or text for a free estimate.
Work Objective I aim to utilize my vast welding experience to further my career within the aerospace industry and metal fabrication and welding skills. Work History * Eaton Aeroquip 3/14/2015-current Certified welder to AWS D17.1 Assemble fit and weld several different parts, using fixtures according to blue prints. I work with aluminum, titanium, inconel and stainless steel. * IMMEC Inc. Welder-Fabricator 9/12/2014-12/08/2014 A welder-fabricator maintains, fixes and repairs machinery at companies like Hostess, Wriggles Gums, General Meals and McCormick. I do general welding and maintenance. * CRES PAC Inc. 8/05/2014-9/15/2014 A welder-pipe fitter maintains, welds and repairs machinery to ensure production. * AWNINGS ABOVE US 4/28/2014 - 8/05/2014 Welder I weld and fabricate awnings and canopies, as well as create blue prints. * WALLACE SHEET METAL 1/14/3014-4/20/2014 Welder I weld and assemble stainless steel conveyors to blue prints. * WSI 11/10/2013-1/10/2014 Welder I operate and incanel weld carbon, steel pipe for nuclear and power plant to blue print specifications. * Superform USA 1/2007-8/2013 Precision Aerospace Welder - Aerospace program Certified Welder to AWS D-17:2001 Class A - Support critical manufacturing operations monthlyproduction requirements - Work on Research and Development programs with Engineering - Provide critical support for structural fabrication operations - Support facilities maintenance program - Manage multiple assignments at one time - MIG and TIG machine welding - General welding and support machinery experience - Vast experience generating manufacturing jigs and fabrication tooling * La Bruna Industries-Ontario, California 9/2002-1/2007 Welder / Fabricator - sheet metal: layout and blue print work for daily fabrication operations - prototype work on newly developed fixtures and jigs - shear, press brake and welding operations - tube bending for daily fabrications - general metal shop equipment experience * Brydenscott-San Bernardino, California 9/1998-9/2002 Welder/Fabricator - I.S.O welding operation - sheet metal: layout with blue prints daily manufacturing operations - work on fixtures and jigs - general assembly and welding operations - metal shop/machine shop experience Qualification * 1998 - Current: welding and fabrication techniques * MIG and TIG machine welding experience * Heliarc Fabrication welding experience * Spot welding experience * Aluminum as well as Stainless Steel and Titanium experience * Program Certified welding to AWS D17.1 Achievements * Forklift certified 2006-Current Certification for Aerospace Welding References or salary history will be supplied upon request. I have over 17 years of experience in welding MIG, TIG, aerospace alluminums, stainless steel titanium and fabricating and fitting very detail and quality work. I have a knowledge of most sheet metal machinery, such as shears, band saw press, break punch press, mills, torch plasma and most air and power hand tools.
I have over 15 years experience in welding and mechanic work -- from something as simple as brakes and oil changes to rebuilding engines.
I specialize in custom Tig Welding. The majority of my work focuses on the automotive market, however, I have participated in projects expanding to all fields of the trade. I've created custom intercooler setups, to custom bed frames. Even a custom target stands for the shooting advocates. Anything that has to do with metal and needs to be melted together, I can create. You dream it i build it.
I have been a MIG welder for ten years and can fix, repair, make or invent any custom iron work needed. My main goal is always customer satisfaction.
This group of experts provides mobile TIG welding services in Hemet. See their numerous well-rated customer comments on Thumbtack.
Do you want a group of professionals who will provide aluminum TIG welding services? Proactive Welding Zone Inc. is one of the best industrial welding companies to offer fabrication welding services.
This team of professionals has been offering MIG & TIG welding services for 16 years. This company has metal welders who are available for your needs on any occasion.
Joshua Baez is among the custom welders who work on all types of metals. He has done welding projects for Fortune 500 companies, businesses, and more.
I can do all your wrought iron needs including fences, custom gates, pool enclosures, window protections and custom fireplace doors. Plasma designs are available upon request. Powder coating is also available.