Milpitas, CA29 Drafting Professionals near you

Where do you need the Drafting Professional?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Milpitas Drafting Professionals

Browse these drafting services with great ratings from Thumbtack customers in Milpitas.

  • 44 years in business
  • 6 hires on Thumbtack
Brittany C.
Verified review

I had a great experience with Ben! He got to know my project, a basement built-out, really well and made several improvements to our drawings that pushed us through the permit office. He picked up the project from a former architect without concern (something not all architects will do) as he understand the amount of work we'd already put in and didn't want to loose. He improved upon all of it and was the critical factor to jump start our project. He's personable, smart, fair, professional and very communicative. I am grateful to him for his work for us and I would absolutely recommend him.

Top Pro
2d3d4d5d
4.7
from 7 reviews
  • 12 hires on Thumbtack
  • Top Pro on Thumbtack
Amy C.
Verified review

We hired David to create CAD drawings for plans we needed to get approved from the city. David came and met our contractor and made suggestions and observations that were helpful. It is obvious he has training in architecture and is knowledgeable about minimum requirements for city code. Drawings were approved by the city and we are happy with the results. I would not hesitate to hire David again.

Logan
4.6
from 5 reviews
  • 3 hires on Thumbtack
Banks D.
Verified review

He exceeded my expectations. I'm he is now my go to for all of my mechanical CAD work. Hands down the best with communication and delivering quality work.

Design & Drafting Services
4.3
from 4 reviews
  • 8 years in business
  • 1 hire on Thumbtack
Ysabel Y.
Verified review

Eli was recommended to me by my contractor. We were remodeling our home and were in need of his services. He was very prompt and we can tell he was skilled at remodeling and home renovation. He brought up good points and ideas that we wouldn't have thought of ourselves. He was clear, concise, and was very patient with our questions and concerns. He worked well with our contractor and the City, which is an entire ordeal in itself. He even went out of his way to meet with the City for questions and concerns they had. We couldn't have asked for a better engineer and drafter on our team! Thank you, Eli!

3D Modeling & CAD Services
5.0
from 2 reviews
  • 4 hires on Thumbtack
Todd G.
Verified review

Thank you for your help. You were able to quickly and affordable take my conceptual drawings and turn them into concrete plans.

Oak View Designs LLC
5.0
from 2 reviews
  • 1 hire on Thumbtack
Jim C.
Verified review

Margaret took over a project in turmoil and turned it around immediately. Her architectural and CAD skills enabled us to meet strict city timelines and guidelines with ease. We would recommend using Oak View Designs.

Marie G.
Verified review

Jonesy is very professional but also personable and understanding of people's needs, situations, and how things interact with one another, when dealing with layouts. For an event, there are so many details to be aware of and he thinks about all of them! Jonesy has so many years of experience doing event management and event layouts, I would use his services for any event where I want things to run smoothly.

  • 4 years in business
  • 1 hire on Thumbtack
Phil J.
Verified review

Needed a set of 2-D CAD drawings to be generated from hand sketches on paper. Zack worked very quickly and communicated well regarding changes, corrections, and clarifications. I expect to use Zack's Prototyping on additional CAD projects in the future.

Sigma Design and Drafting
4.0
from 1 review
  • 18 years in business
  • 4 hires on Thumbtack
Kevin M.
Verified review

Bahman did a good job on our plans for our garage conversion; the contractor said he really likes the plans, they were very detailed and precise. He started by coming over to our house for a couple hours to measure many things and take notes. After that he provided a few example floor plans, and my wife and I sent back ideas for what we had in mind. After agreeing on a floorplan, he handled all the communication with the city until the plans were approved (it took a few rounds, as expected). Even after the plans were approved, during construction a few issues came up and he handled printing out updated versions of drawings and sometimes came to the city planning office to make sure they would get approved. This was a long process but Bahman stuck with us all the way.

About

- Successfully completed and delivered numerous high quality, fast turn projects. - Experienced in 3D modeling and 2D layouts. - Concept to product capabilities. - Broad skill set.

About

I am a pro engineer doing CAD designs. I have two years of CAD experience, including optimization, ops research and statistical process control. I am available on a part-time or consulting basis. I have BSAE and MS Engineer Management.

About

Services offered: * CAD drafting and design * building measuring * as-built drawings * new homes, remodels and addition plans * tenant improvements plans * restaurant design and plans * base floor plans * structural, HVAC, plumbing and electrical drawings * solar installation drawings * patent drawings * manufacturing product drawings * renderings * property assessment condition survey and report

About

About

We provide 3D CAD modeling (SolidWorks) and mechanical engineering services. We have experience working with inventors to get designs to a stage that is ready to manufacture and prototype, as well as providing services to small businesses.

  • 8 years in business
About

I am an architecture undergrad in college, and I have experience in room add-ons as well as office interior design. I am dedicated and hardworking, and I love working with deadlines. I would love to help you with your floor plan needs.

  • 10 years in business
  • 1 hire on Thumbtack
About

I have a diverse portfolio of skills, techniques, and global experience that translates into efficient and effective design. My capabilities include, but are not limited to, art direction, graphic design, packaging, model making, product design, industrial design, or simply CAD design and drawings.

About

We provide quick yet detailed drawings and models of interior spaces complete with renderings and architectural plans.

About

I have been involved in almost every aspect of home improvement and real estate, so if you need a drafter I have a thorough knowledge of some of the intricacies that can pop up as you progress in your project and can help steer you clear of common pitfalls.

About

I provide architectural CAD design services for residential remodeling and new construction. I can help you get a permit if you are willing to pay for an engineering consultant fee.

About

I prepare CAD drawings for remodeling residential projects for building permits and design work too. I do residential, new construction projects. I help homeowner or contractor get permits. I can do commercial work too. I use CAD or Revit software.

About

I can provide user interface, wireframing and mapping, and some simple front-end development (HTM&CSS).

Hire skilled professionals for absolutely everything.