Oakland, CA
7 sheet metal fabrication services near you
Where do you need the sheet metal fabrication service?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Oakland Sheet Metal Fabrication Services

Browse these sheet metal fabrication services with great ratings from Thumbtack customers in Oakland.

Top Pro
Gomes Handyman
4.8
from 283 reviews
  • 15 years in business
  • 360 hires on Thumbtack
  • Top pro on Thumbtack
Judy M.
Verified review

David has been working for us for two weeks and is doing a very good job. He has put in garage stairs, sheet rock repair, molding around doors and rehanging doors that stick. He arrives on time and goes right to work. It is hard finding a "universal" handyman and I certainly would recommend David. We will continue to use him as we have other projects.

Casiano's Handyman
4.5
from 150 reviews
  • 4 years in business
  • 244 hires on Thumbtack
Cody D.
Verified review

Ricardo did good work. He came in and fixed our disposal after fishing out a metal knife. He was here for 15 minutes, and the cost was pricier than the original proposal. A bit on the pricey side overall, but he left us with a working disposal.

Claremont Sheet Metal
4.6
from 25 reviews
  • 67 years in business
  • 38 hires on Thumbtack
Robert L.
Verified review

A wealth of knowledge and experience with sheet metal and fabrication. I will use his services again soon.

Dark Metal Machine Works
5.0
from 11 reviews
  • 6 years in business
  • 18 hires on Thumbtack
Luis A.
Verified review

I called Dark Metal and left a message. I was glad to have received a call back right away. I spoke with Joseph and when he came out to provide a quote, I showed him where I needed a custom cover to be placed over the hole where I have a sump pump. The open hole was a safety hazard. Joseph provided a very reasonable quote and, delivered the well crafted cover in a matter of days. Overall, it was great workmanship at a great price. I'll add that Joseph was great to work with too! A vey nice guy. I highly recommend Dark Metal Machine Works. -Luis A in Alameda

Sheldon Fabrication
5.0
from 9 reviews
  • 12 hires on Thumbtack
Kurt D.
Verified review

Sam showed up on time at my house, with pre-fabricated metal that I had specified. Very friendly and professional, great attitude, and easily performed the trailer welding, and took on some additional projects I had without issue. He cleaned up and used his time efficiently. I will use him again for other projects.

  • 2 hires on Thumbtack
Liz W.
Verified review

Mark Miller and his team were great to work with. Thorough, concise and prompt. We would definitely recommend them to our friends and family.

Professional Iron Works
5.0
from 1 review
  • 32 years in business
  • 4 hires on Thumbtack
Peter O.
Verified review

Polite, professional and willing to do anything extra to complete a quality job.

  • 10 years in business
  • 4 hires on Thumbtack
About

Giving the customer what they want is #1! When the job is complete i enjoy seeing the customer with a huge smile on their face talking about ideas for the next project we will build together.

Big Dog Metal Fabrication
5.0
from 1 review
  • New on Thumbtack
Anita S.
Verified review

I would like to recommend this shop ,I took a 1946 Harley Davidson fender in for repair and surfacing the metal .their price was low and they had it back in the time they said , I am a Custom Painter they made my job look like a show entrée Thanks Doc

  • New on Thumbtack
About

Imagination is the limit on fence, railing, door, or any metal fabrication design. I design everything, from wood and metal fencing to torches and Roman soldier spears for plays.

  • 11 years in business
  • New on Thumbtack
About

My company is well prepared to fab, cut, weld,form, with quick turn around.

  • 18 years in business
  • New on Thumbtack
About

I have drawn influence from several sources over the past 19 years from fields not limited to metal work. From the time I began working metal professionally I allowed it to consume my waking hours and dedicated myself to making the highest quality products I could. It is far more important to me that the piece be beautiful as well as technically correct than be just a job that gets finished. No matter what the project is from a simple picture frame to a work of organic sculpture it should be the finest quality it can be.

About

We are a precision-job shop that provides one-stop shopping for sheetmetal and machine parts for Silicon Valley customers. Our specialty includes: prototypes, quick-turn, production, and assistance with design. If your requirements include small precision parts to large frames, we are your resource for results.

  • New on Thumbtack
About

I do sheet metal welding, but I can do mostly everything you need done when you need it done. Just call and tell me what you need to be worked on, and we can go from there.

  • New on Thumbtack
About

We offer metal fabrication and installation services. We custom design and install rails, gates, etc. We also cater to field welding, including repairs and additions on demand.

  • 1 hire on Thumbtack
About

. I graduated with honors from Los Medanos College in 2013, majoring in welding technology. I currently hold two certifications in shield metal arc welding and i am working on a third.

  • New on Thumbtack
About

We are a custom metal fabrication shop. We handle various sizes and types of decorative and structural jobs. Our services include the following: * Welding * Forging * Design * Repairs, etc. Examples of our work are gates, rails, stairs, spiral and curved stairs/rails, bridges, furniture, fire pits, sculpture, brackets, and structural, marine, and miscellaneous stuff. Materials used are steel, stainless steel, aluminum, bronze, etc. We are AWS certified and have national awards. We have 30 years of experience. Please check us out on our website or Facebook for more info and to see photos of our work.

  • New on Thumbtack
About

I am a maker, a designer, and a fabricator. * Soldering * Electromechanical assembly I provide custom fabrication of the following: * wood * metal * plastics

  • 5 years in business
  • New on Thumbtack
About

ATR Welding Services and Solutions is your one-stop, on-site, and in-house welding shop. Our goal is to make sure our customers leave satisfied with a quality product. Our team specializes in custom welding, fabrication, and metal repairs. "We are a company where quality counts." If you dream it, we can build it! From big to small welding needs, give ATR a call. We offer the following welding and cutting processes listed below: * Gas metal arc welding (GMAW), sometimes referred to by its subtypes metal inert gas (MIG) welding or metal active gas (MAG) welding * Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding * Shielded metal arc welding (SMAW), also known as manual metal arc welding (MMA or MMAW), flux shielded arc welding or informally as stick welding * Flux-cored arc welding (FCAW or FCA) * Oxyfuel gas cutting * Plasma cutting

  • New on Thumbtack
About

Using all types of metal, Vaida creates contemporary and organic forms that are functional and sculptural pieces of art. Keeping his clients' personal aesthetics in mind, Vaida works to understand how his designs will be used and where they will be placed. Personality, function, and surroundings are key elements for designing pieces that will be enjoyed for a lifetime. Please contact Jamie Vaida, metal sculptor, with your private, commercial or public project commissions. Vaida works on steel, copper, brass, bronze and stainless.

About

I am a journeyman sheet metal worker with 15 years of experience in both shop fabrication and field installation. I completed a 5-year apprenticeship that combined formal education in a classroom setting and on-the-job training, working on contracted mechanical installations. I have worked on all types of projects from apartments to high-end custom homes; tenant improvements likes storefronts and high-rise office buildings; critical environments like hospitals, data centers, and Lawrence Berkeley National Laboratory (U.S. Department of Energy); and even Class 100 clean rooms. I am ready and able to meet any challenging project you may have. My work will be done on-time and on budget.

Hire skilled professionals for absolutely everything.