Oceanside, CA5 Sheet Metal Roofing Professionals near you

Where do you need the sheet metal roofing professional?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Oceanside Sheet Metal Roofing Professionals

Browse these sheet metal roofing companies with great ratings from Thumbtack customers in Oceanside.

  • 13 years in business
  • 105 hires on Thumbtack
Ruel H.
Verified review

You know how they say when it rains, it pours? Well... El Nino Rains plus our 30+ Year Old House equals ROOF LEAK. We needed a Roofer. We got three referrals here on Thumbtack. Of those three referrals, it was obvious that Erik Havens and his Advanced RoofLeak Solutions business was the roofer we should go with. Doing our own research on the referrals, we found that Erik's business Advanced RoofLeak Solutions Inc. is definitely a licensed contractor whose contractor's license is, yes, actually for roofing. The state contractors database confirms this. Also, we noted that Erik's roofing business is an "Inc." meaning his business is incorporated as a corporation. We liked that because to us that meant Erik most possibly had a smart stable business. The state corporate database confirmed his business' active corporate status. As for Erik himself, don't let his youthful looks make you wonder about his experience. This 30 year old guy knows his stuff. Roofing runs in his family. Erik has been working in roofing since high school. My impression is that Erik knows how to run a quality roofing business. He is very respectful and honest when dealing with his customers. And he takes pride in his work and is thankful for his customers hiring him to do the work. We never met Erik before. But if you talk to him for a while, then you may see the same forthright excellence that we see in Erik. So, what did Erik do for us? We had a leak in the roof. This was for the roof on top of the garage for our 30+ year old house which has a red tile roof. Erik went up onto the roof with his ladder and immediately pointed out a row of tiles that were sliding down opening up an exposed area where the rain came in. That exposed area then affected an 8-ft by 8-ft area. That effect was obvious to us from inside the garage looking up at the underside of the roof where we can see a big wet stained area. Erik's work included disassembling the tiles for that section on top of the roof, putting in new underlayment material, applying roof mastic sealant, and then reassembling the red tiles back in properly aligned rows. (And there were lots of hammer pounding and other loud noise while he was working up there on the roof.) And afterwards, while he was still up there, Erik additionally checked the rest of the roof, he resealed any vent pipes (and whatever else) that needed new sealant, also checked the stability of the sun roof up there, and looked for any other potential problem tiles that could possibly be sliding out of place. There were a few other tiles beginning to slide down a bit. Sliding tiles seem to be a typical potential problem for old tile roofs. Erik secured those few other tiles pushing them back into place. Erik said the underlayment for those few other tiles was still fine. One other thing that Erik did was to clean out the gutters and make sure they were secure. Yes, imagine that: a 30+ year old house with gutters that have never been cleaned out until now. One of the gutters on the second story roof was full of leaves. Erik cleaned that out. So, Erik did a really complete job and more! My impression is that Erik is a busy roofer who is in demand. In my conversations with Erik while he was up on the roof, with myself watching him from down below, Erik mentioned how the El Nino Rains and Winds have been bringing him so much business going his way. (My guess is that this was even before El Nino as people wanted to secure their roofs in time for when El Nino arrives.) Yeah, Erik is apparently very very busy. Meanwhile, our neighbor was also looking up watching Erik and was apparently interested in also hiring Erik to work on his roof, and ended up having their own conversation as to when Erik would look at the neighbor's roof. So, Erik is apparently a busy guy, who does quality work, and is in demand. He works on roofs all over San Diego County. He goes wherever the work is located. If you are considering whether to hire Erik, we would strongly say that based on our experience to give him a call or to send him a message here via Thumbtack. Also, definitely give him your phone number and your address so he can figure out when to schedule a visit to actually look at your roof in order to give you a proposed written estimate. Erik's proposal for fixing OUR roof was a good reasonable fair price. My suggestion is to NOT go cheap in repairing your roof. The two other referrals that we got from Thumbtack would have been cheaper and would have undercut Erik's proposal where one thumbtack referral was from an unlicensed roofer who was not in the state contractors database and the other thumbtack referral was from a solar guy whose contractor's license was for electrical. For our roof, we were willing to pay a little more for a quality roof repair by a licensed experienced roofer (whose contractor's license was actually for roofing) and we expected the roofer to stand behind his work. And we indeed got a qualified licensed experienced roofer in Erik Havens and his Advanced RoofLeak Solutions business. Thanks Erik.

  • 25 years in business
Joanne Archambault
Verified review

I love my floors but did not realize it would be such a mess, between cutting the laminate and grinding the concrete there was a ton of very fine sawdust and powder everywhere. I live in a condo so we kept moving the furniture around and my only complaint is that I wish the workers would have had sheeting or something to cover the furniture. I would have if I had known. However, Sears was extremely efficient. I called and had an appointment for a bid the same day, and then measurements were confirmed very quickly. The order was placed and everything was completed within a couple of weeks. If not for the mess, and what I think was poor planning, I would have given them 5 stars.

  • 39 years in business
  • 11 hires on Thumbtack
J. R.
Verified review

After a phone chat, I sent Mr. Duin an e-mail outlining the projects I had in mind. I asked him to help me select those that fit into my quarterly budgets. Together we selected three that needed attention this winter. 1. stabilize a wobbly 6 foot block (gate) wall that was inches from a gas main, 2. Build a short block wall that would hold back dirt from a muddy embankment, 3. Reinforce a swaying wood fence and wrap metal posts with cedar – box style. Mr. Duin and staff did an outstanding job of listening to my needs. I was impressed with their work, quality of materials, work ethics and attention to detail. They were very pleasant to work with and I look forward to our next round of projects. I hope to include the trim/molding (with up lighting) along the ceiling of my front porch which will have to wait until early Spring – due to budget considerations.

Nicholson Sheet Metal

New To Thumbtack

    About

    I do all sheet metal jobs big and small, from rain gutters to flashing roofs and windows to every sheet metal needs, just call.

    Avery a Ford Able

    New To Thumbtack

      About

      I am a sheet metal union worker.

      Q & A

      Answers to commonly asked questions from the experts on Thumbtack.

      What is a standing seam metal roof?

      A standing seam metal roof may be a strong, durable, safe choice when you’re considering metal roofing installation options. A standing seam refers to the raised seam where the sheet metal roofing panels join. Traditionally, shingles and roof panels lie flush to the roof, making them more prone to rust or penetration by water at their seams. In a standing seam metal roof, the raised (or standing) seams run vertically from the roof ridge to the eaves, with no horizontal seams. In addition, the fasteners joining the metal panels together are concealed, providing even fewer opportunities for water or moisture to build up. The cost to install a standing seam metal roof will depend on the type of metal you select, the size of your roof, and the cost of roofing labor in your region. Materials will play a major role in your metal roofing installation costs. If you select standard galvanized steel, the cost per square (100 square feet) might be in the $150-$300 range, while a high-end choice such as copper or zinc could be between $1,000 and $1,500 per square. Here is one example of cost:   

      • Standing seam metal roof: $300 per square to start, including materials and labor.
        • A 30-square roof could cost $9,000 or more.

      Can a metal roof be installed over shingles?

      Metal roofs are durable, environmentally friendly, safe and budget-friendly. If you’re considering an update, metal roofing installation doesn’t have to mean completely removing your old roof. In many cases, metal roofing can be installed over your existing shingles. Research building codes in your state, as many require that after two roofs have been installed, all roofing materials must be completely removed before a third roof can be put on. This protects your home’s structural integrity and your family’s safety. Carefully read contractor reviews and choose someone with extensive experience with metal roofing installation. One concern when installing metal over shingles is that over time, condensation can build on the shingles and cause the metal to rust. This will lead to rust around the panels, making them more likely to come loose in a storm. Nationally, the average cost for metal roofing installation ranges from $6,000 to $20,000. The wide price range represents different roof sizes, different types of metal, and the cost of labor in different parts of the country — and can also include the cost of removing an old shingle roof prior to installing the metal. As a line item, the average cost of removing an old roof to prepare for installing a new roof, plus adding new roof decking, costs on average about $45-$75 per square (the pro roofer’s term for 100 square feet), depending on the pitch of the roof. Always make sure you have a clearly written contract and a warranty on both the labor and the metal.

       

      How much does it cost for a metal roof?

      Metal roofing installation is an attractive option thanks to metal’s long lifespan, hardiness and fire-retardant properties. Nationally, the average cost for metal roofing installation ranges from $6,000 to $20,000.There are different types of metal roofs, each with their own installation needs and materials costs. Roof size also affects your metal roofing installation costs, as do regional labor rates. Roof size is measured in squares; one square equals 100 square feet. Here are some examples of the average cost for a metal roof:

      • Standard metal roof: $120-$150 per square to start, including materials and labor
        • A 30-square roof (a 3,000-square-foot roof) could cost between $3,600 and $4,500 for a typical three-bedroom home.
      • Snap-Loc metal roof: $200-$225 per square to start, including materials and labor.
        • A 30-square roof could cost $6,000-$6,750.
      • Standing seam metal roof: $300 per square to start, including materials and labor.
        • A 30-square roof could cost $9,000 or more.
      • Tuff-Rib metal roof: $250-$350 per square to start, including materials and labor.
        • A 30-square roof could cost $7,500-$10,500.
      • Mid-range metal roof package, including all accessories: $300-$500 per square.
        • A 30-square roof could cost $9,000-$15,000.
      • High-end metal roof package — such as zinc or copper — and all accessories: $1,000-$1,500 per square.
        • A 30-square roof could cost $30,000-$45,000.
      Hire skilled professionals for absolutely everything.