Springfield, MA0 CNC Machinists near you

Where do you need the Cnc Machinist?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Springfield Cnc Machinists

Browse these CNC machine services with great ratings from Thumbtack customers in Springfield.

Irene Designs, LLC
5.0
from 6 reviews
  • 12 years in business
  • New on Thumbtack
Chip F.
Verified review

This is not a typical review, but our association is unique and I trust that yours would be the same if you were to select Irene Design as your consultant. We met Irene at a home show. We had been thinking about remodeling the interior of our home, but wanted a design consultant to work with us. We contracted with Irene Design to be our consultant. During the first visit to our home to take pictures and discuss with us, what we liked and disliked, I pointed out to her that the carrying partition on the first flow did not run parallel to the outside wall. Thus, any pattern in the flooring would also appear to diverge from the wall. Irene, immediately suggested that the tiles be installed at a 45 degree angle, which totally eliminated the problem. We then continued to work with Irene on the layout of the bathrooms, the wallpaper selection and the carpeting to mention only a small portions of the interactions we had with her in arriving at a design that met our needs and tastes. We had differences with Irene, but in each case Irene was always open to our suggestions. We would sit and discuss the pros and cons of each change and were always able to arrive at a decision that best met our needs. Once, we had finalized the design, we prepared a bid specification setting out exactly what we expected the contractor to do and what we would supply. This bid specification was given to 4 separate contractors including Irene Design. It should be noted that Irene had assured us that she would work with whichever contractor we selected to assure us that the design, such as the tile layouts in the bathrooms would be done as she had planned. While all four contractor bids were fairly close, Irene Designs bid was slightly less, so we selected them to perform the construction. At the same time we had also contracted with an electrician and a painter/wallpaper hanger. The electrician did an excellent job, however the painter made some serious errors in prepping the stair case walls for papering. After several attempts by the paper hanger to repair the problems, it became evident that all the paper in the stair case would have to be remove, the wall repaired and primed correctly and then repaper the whole area. Irene Design, on learning of this said that they would do the repair work at cost to help us out of this difficult situation. For these reasons, we highly recommend Irene Design if you are considering a remodeling project. If you would like to discuss our experience with Irene Design, we would welcome your calls

About

I'm a successful fashion and graphic designer, apparel licensee, and brand management professional who is qualified by over a decade of visible achievements in the urban fashion industry. I'm a visionary leader and team player with a stellar track record of superior performance in graphic and fashion design, apparel licensing, and marketing. I have very proficient skills in Adobe Creative Suite, Photoshop CS5, and illustrator design programs. I'm an outstanding creative communicator with excellent qualifications in: * Apparel branding and licensing * Apparel and graphic design (sketch/CAD) * Apparel tech pack development * Textile and fabric sourcing * Trend forecasting, strategic marketing, and competitive product positioning * Fashion brand development planning and business management * Product placement and entertainment seeding * Fashion ad campaign styling and art direction * Apparel trade show planning * Product management * Fashion blogging/trend and brand awareness * Website design * Photography

About

Our services include the following: * Custom Software Development * Reverse Engineering and Technology Migration * Database Design and Development * Business Automation * Structured Software Maintenance Services * HIPAA Compliant Application Design * Requirement Analysis and Software Requirement * Specification Development * Reports and Data Warehouse Development Our specialty includes the following: * Java/J2EE * .Net * VB6 * Domino * SQL * Oracle * Crystal Reports * Salesforce

  • New on Thumbtack
About

We are a 22-year old electro-mechanical job shop using a highly integrated 3D CAD-based system to design, document and fabricate parts and assemblies. We have been doing all of our CAD work in 3D since 1990 and have the ability to generate fabrication/specification drawings, PCB's (via Gerber), parts lists and BOM's, CNC code for our in-house machine shop and STL files for our color 3D printer. We also do light assembly, welding (TIG, MIG, oxy-acetylene and ERW) and laser marking.

  • New on Thumbtack
About

GA is a full-service architecture firm that understands that innovation stems from increasingly accurate project metrics. Our work is both innovative and creatively pragmatic. We pride ourselves on an ability to use the constraints of construction and costs to produce projects that provide beauty, authenticity and the right fit for our clients.

  • New on Thumbtack
About

Northern Services provides complete CAD design and drafting services. Our previous projects include medical devices, aircraft, space flight hardware, ground support equipment and tooling.

  • 9 years in business
About

With over 25 years experience in film and video I have learned hundreds of subtle little techniques that I apply to projects that can have a dramatic effect on the overall quality of the production.

About

I have a gift of translating an idea into conception, and understanding what people are trying to convey. Together we create a vision and my clients watch me bring it to life. Being a people person, I enjoy taking special interest in all of my clients and to this day even have the pleasure of calling some of them friends. After 10 years in the corporate design world I have started to branch out on my own to work with people in their homes. I found it frustrating when family and friends had a vision but could not bring it to life. And if they could bring it to life, did not know how to get the job executed. Blindly calling on contractors can daunting, and I could help. With my experience of not only the design process but the implementation process, I am able to translate design ideas into reality and make sure the work is being done at a fair price, in good quality and in a reasonable amount of time. • Conceptual design – understanding your needs and bringing them to life through digital finish boards and samples. • Space planning – Getting the floorplan on paper so we can see your design, to scale. • Furniture fixtures & equipment (FF&E) – Finding the right pieces, materials and finishes to complete your space, on or under you budget. • Budgeting – Figuring out how and where your money is best spent. • Bidding – Finding the right professionals to work on your project, at a reasonable price. • Project Scheduling and oversight – Ensuring things are going to plan, troubleshooting and execution of your project in a timely and neat manner. My pricing is reasonable and we can custom create a package of services to accommodate your needs. I can help get you started or manage the entire project - your wish is my command!

  • 4 years in business
  • New on Thumbtack
About

Experience. 25 PLUS Years in the engineering and the general contracting fields. Hard Work. The ONLY way. Reliability. Customer satisfaction. Meeting my customers and designing and managing their projects to completion.

  • New on Thumbtack
About

Above averave in both spee, accuracy and creativity. The oportunity to exercise my creativty

About

We do all phases of construction and remodeling from the ground up. We are specializing in plaster, mold making and stucco.

About

I have a fine arts degree in visual communication design and master's degree in computer animation, besides having developed a strong knowledge base for design concepts and good artistic abilities and a strong understanding of visual communication. These skills have been particularly honed during studying for my fine arts and animation degrees and also through my previous work experience as a visual designer. I have gained valuable experience working in a professional and creative environment. Furthermore, I've enhanced my communication and interpersonal skills whilst working on several team-based projects, producing creative ideas while working under pressure to meet deadlines without compromising on the quality, which also helped me in obtaining experience in prioritizing my day-to-day tasks and effective time management. I resigned from my job in UK and moved to US after my marriage, and for the past 3 years, I have been freelancing here.

  • 27 years in business
  • New on Thumbtack
About

Our professional Services offer:--> New or existing; product development, product design, product engineering, manufacturing engineering, assistance with patent and patenting processing, patentability searches, patent applications, trademark and copyright procedures. We also build proof of designs: prototypes, including fabrication of new inventions and presenting unique concepts in front of the United States Patent & Trademark office. We are a Long Island product design and development company, invention firm, new idea firm, and turnkey new product design, development, prototyping, patenting and marketing firm. We also encompass the entire U.S. We do the following: * New product design and development * New concepts, new ideas, and new inventions, we help you to realize these dreams!!! *Assistance with Intellectual Protection * Patents processing (Provisional, Utility, Design, Methods,Chemical ......) * Trademarking * Copyrights

Hire skilled professionals for absolutely everything.