Architectural Services

Find a building designer near Baltimore, MD

Find a building designer near Baltimore, MD

Give us a few details and we’ll match you with the right pro.

Zip code

Top 4 Building Designers near Baltimore, MD

Avatar for JFD.NCARB-LLC
Avatar for JFD.NCARB-LLC
2.
JFD.NCARB-LLC
2.
JFD.NCARB-LLC
New on Thumbtack
New on Thumbtack
  • 6 hires on Thumbtack
  • Serves Baltimore, MD
.James F. Dickinson ARCHITECT - NCARB – LLC 7688 Blueberry Hill Ln Ellicott City, MD 21043 INNOVATIVE RESIDENTIAL ADDITION – LIVINGSTON, NJ Any design project, whether a butler’s pantry or an innovative addition lends itself to the proper solution; depending upon client requirements, existing site / structure and budget. This Client (see photo in media section) wanted to build a one-story addition to avoid stairs where possible due to physical limitations; but a sanitary sewer easement limited any normal addition to a very narrow “bowling alley” effect for a family room. After discussions with potential contractors this client was recommended to bring in an architect. Building lots in the tract were originally configured based on the required 1 acre lots at the time. Subsequent, revised zoning permitted more lots; therefore, more residential units equal more profits for the builder. Unfortunately, the easements & infrastructure were established. Result was a sanitary sewer easement through the lot rather than at the edge of the lot. Solution was to survey the existing 15’ wide easement to locate the existing piping – then cantilever over the easement by 4 feet without inhibiting access to the piping should piping replacement become necessary. Result was a very satisfied client and a very desirable family room with the requested large fireplace and center skylight at the roof peak; plus, a one car garage added under the cantilever. The attached photo and plans indicate the successful solution. Respectfully Submitted; James F Dickinson, NCARB Challenging / problem solving & artistic excellence. Diversified architectural design - Commercial Facilities & Residential excellenceSee more

Available for an estimate tomorrow

Available for an estimate tomorrow

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

How do architects work?

Architects may work for an architecture or engineering firm, they may work for a government organization, they can work for a construction company, or they may be self-employed (freelance). The U.S. Bureau of Labor Statistics explains that architects spend a large amount of their working time in the home or company office: meeting with clients; creating reports and architectural drawings; and working with other architects and engineers. When not in an office, an architect is often at the construction site either as part of the development of plans or to ensure building progress is following the blueprint.

When a client interacts with an architect, it is typically to have them design drawings for the construction of a house or a building. If you are a client who has hired a large architecture firm, there may be a team of people working on your design. But if you are working with a freelance architect or a smaller firm, one person (or a small group) will take your concept and translate it into an architectural blueprint that a builder can use to construct a house. The plans will lay out everything from the depth of the foundation to the materials to use to the type of metal to be used in the reinforcement. Once the plans have been created and handed off to the builder, the architect may remain on the project — depending on budget — and oversee progress.

How do architects charge for their services?

According to the U.S. Department of Labor, the median salary of an architect in 2016 was $76,930. This range included architects with every type of company as well as self-employed architects. Depending on the architect and whether they’re with a firm or independent, they may charge per hour or by the square foot, or they may charge a percentage of the total budget for a construction project. An hourly rate is typically used for smaller projects such as providing consultation, helping clients hone their concept before the design process begins, or drafting documents and plans. If an architect is working on an hourly basis on a larger project, there will usually be an agreed-upon cap on the number of hours they will work. For larger projects, such as new construction or total overhaul remodels, architects may charge a percentage of the total construction costs. The architect will usually set the percentage you will pay after the total cost of construction has been accounted for. Percentages can range within a firm depending on the extent of the services they’re providing. For example, a lower percentage of the total construction costs may include drafting and minimal consultation and guidance along the way, while a higher percentage could include on-site project management services with every detail attended to. Architects may also charge by the square footage of the project. The rate per square foot can vary depending on the individual’s training, the services they are providing, the complexity of the project, and other factors — such as obtaining permits. The national average cost to hire an architect is between $1,690 and $2,500.

What do house plans consist of?

In a house plan, you can expect to see an overview of the construction site, floor plans, roof plans, foundation plans, electrical plans, exterior elevation and more. Always ask your architect what they plan to include in your house plan.

There are 21 five star Building Designers in Baltimore, MD on Thumbtack.

Why hire professionals on Thumbtack?
Free to use

You never pay to use Thumbtack: Get cost estimates, contact pros, and even book the job—all for no cost.

Compare prices side-by-side

You’ll know how much your project costs even before booking a pro.

Hire with confidence

With access to 1M+ customer reviews and the pros’ work history, you’ll have all the info you need to make a hire.