Heating System Repair or Maintenance

Find a HVAC Professional near Spring Valley, NY

Find a HVAC Professional near Spring Valley, NY

Give us a few details and we’ll match you with the right pro.

Zip code

Top 7 HVAC Professionals near Spring Valley, NY

B
B
6.
Bamm's HVAC and Plumbing
6.
Bamm's HVAC and Plumbing

Good 3.5

(6)

Good 3.5

(6)

Heating System Installation or Replacement, Heating System Repair or Maintenance

In high demand
  • 22 hires on Thumbtack
  • Serves Spring Valley, NY
Ashwini B. says, "I hired Bamm's to change my heating oil hydro forced air system as well as the water heater to the Air source heat pump and Hybrid heat pump water heater. His team installed 2 three ton cold climate ASHP with 2 Air handlers (Tosot T Unix, it is rebadged Gree flexx). Then replaced the water heater to Rheem 50G Hybrid Water heater. Got rid of the old oil furnace and water heater. Initially the proposal was $21k. As my project needed some additional electric wiring and I requested to file permits first, these cost extra. The total cost of the project was close to ~$25k (this included sales tax for the new equipment, electric wiring charges and filing charges). No ductwork needed. CT installers were either too expensive or didn't provide cold climate ASHP options. The project did take longer than expected. They installed the first heat pump in April end (takes about 1 day per equipment), the next one 15 days or so later and the water heater as well. Junk removal was scheduled 20 days later or so. But installers made sure we had heat and hot water except during actual installation. This is a constructive feedback I would give Rich, that is he needs to give better time estimate and needs some assistant who can do the paperwork. That is to say things like invoices, clear estimate breakdown. He needs to communicate the expectations clearly such as what is extra and what is included. This will go a long way. That's why I removed 1 star from the review. We initially thought old equipment removal included oil tank removal, which is not the case. As long as it was made clear in the project estimate it would have been better. Originally Rich was not part of the Energize CT installer network. Up on my request he registered on it as it is needed for CT residents to claim any rebates, which was nice. This was one of the main decision making criteria for the project for us, the other being price. Project came with 1 yr workmanship warranty and 10 yr parts warranty. It's been 5 months since the installation. However, Had one issue with the heat pump not producing enough heat, which was a result of adding low refrigerant level during installation, Rich sent his team member Matt, who diagnosed it and took care of it. So far all is well."See more
Ashwini B. says, "I hired Bamm's to change my heating oil hydro forced air system as well as the water heater to the Air source heat pump and Hybrid heat pump water heater. His team installed 2 three ton cold climate ASHP with 2 Air handlers (Tosot T Unix, it is rebadged Gree flexx). Then replaced the water heater to Rheem 50G Hybrid Water heater. Got rid of the old oil furnace and water heater. Initially the proposal was $21k. As my project needed some additional electric wiring and I requested to file permits first, these cost extra. The total cost of the project was close to ~$25k (this included sales tax for the new equipment, electric wiring charges and filing charges). No ductwork needed. CT installers were either too expensive or didn't provide cold climate ASHP options. The project did take longer than expected. They installed the first heat pump in April end (takes about 1 day per equipment), the next one 15 days or so later and the water heater as well. Junk removal was scheduled 20 days later or so. But installers made sure we had heat and hot water except during actual installation. This is a constructive feedback I would give Rich, that is he needs to give better time estimate and needs some assistant who can do the paperwork. That is to say things like invoices, clear estimate breakdown. He needs to communicate the expectations clearly such as what is extra and what is included. This will go a long way. That's why I removed 1 star from the review. We initially thought old equipment removal included oil tank removal, which is not the case. As long as it was made clear in the project estimate it would have been better. Originally Rich was not part of the Energize CT installer network. Up on my request he registered on it as it is needed for CT residents to claim any rebates, which was nice. This was one of the main decision making criteria for the project for us, the other being price. Project came with 1 yr workmanship warranty and 10 yr parts warranty. It's been 5 months since the installation. However, Had one issue with the heat pump not producing enough heat, which was a result of adding low refrigerant level during installation, Rich sent his team member Matt, who diagnosed it and took care of it. So far all is well."

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

What is the most common type of heating system?

The most common type of home heating system is a forced-air heating and cooling system. This type of heater involves a furnace, which is commonly powered by natural gas, forcing air through a series of ducts that distribute the hot air through different rooms in a house. Furnaces can run on other types of fuel, including electricity, propane and oil. This type of heating system is quite popular because it doubles as a path for air conditioning in the summer.

What is the most efficient heating system for a house?

Geothermal heating tends to be the most efficient way to heat a house when compared to traditional HVAC systems, according to the U.S. Department of Energy. Geothermal heat pumps (also called ground-source heat pumps) transfer energy to and from the ground to supply heat, cool air and hot water.

Note that one of the most important ways to boost efficiency, save electricity and lower your heating bills is to make sure your house is weather-tight and well-insulated.

How much does it cost to install a heating system?

The cost of a heating system depends largely on the type and size of the heating system. For example:

To find out how much your new heating system will cost, contact heating and air companies near you and ask for free cost estimates.

How long does it take to install a new heating system?

A new heating system generally takes a few days to install. Jobs that require new ductwork will take more time. And switching to a different type of heat fuel — propane, natural gas, oil or electricity — may require longer installation times as well, as they could require routing piping, regulators and other adjustments to your home.

When should you replace a heating system?

The better care you take of your heating system, the longer it will last. The International Association of Certified Home Inspectors estimates the following lifespans for heating systems:

  • Heat exchanger: 10-15 years
  • Heat pump: 10-15 years
  • Furnace: 15-25 years
  • Electric radiant heater: 40 years

If your heating system is broken, hire a contractor or a repair service to take a look at it. They can help you determine if it makes financial sense to replace your system or spend money on repairs. The good news is that replacing your old furnace will give you the opportunity to take advantage of newer, more efficient furnaces that can save you money on heating bills from the first cycle. 

How does a hot water baseboard heating system work?

In a hot water baseboard heating system, a boiler heats water and then the water passes through the system’s pipes and into the baseboard radiators in your home. Baseboard heating systems are generally quiet, and you’ll experience less heat loss when compared to a forced-air system. However, you can’t use radiant basement heating for cooling purposes.

How does a central heating system work in a house?

A central heating system consists of a boiler, heat pump or furnace. The furnace contains several parts, including burners that deliver and burn fuel, a blower, heat exchangers, a blower and a flue. The furnace will push air through the heat exchanger. Then, it will pump the warmed air through your air ducts to distribute heat throughout your home.

In the summertime, a central heating system can also provide air conditioning to cool and dehumidify your home.

What is a dual fuel heating system?

Dual fuel systems combine two types of heat fuels — typically gas and electric, the latter in the form of a heat pump — to boost heating performance and efficiency. These systems work with your furnace to deliver both hot and cold air.  A major advantage lies in the power of a heat pump, which provides cool air in the summer and heat in the winter.

What is a radiant heating system?

A radiant heating system can be installed in your floors or wall panels. A radiant floor heating system warms your home from the ground, providing uniform heating throughout your home. These systems are quiet, and they don’t require ductwork.

How often should a heating system be serviced?

Many experts say a heating system should be serviced at least once per year. Specifically, the best course of action is to service a heating system in the fall before colder weather arrives. And, you should get your air conditioner serviced in the spring before the weather heats up. 

It’s especially important to hire a professional to perform repairs whenever you hear strange sounds, such as clanking, knocking or banging.

There are 6 five star HVAC Professionals in Spring Valley, NY on Thumbtack.

Why hire professionals on Thumbtack?
Free to use

You never pay to use Thumbtack: Get cost estimates, contact pros, and even book the job—all for no cost.

Compare prices side-by-side

You’ll know how much your project costs even before booking a pro.

Hire with confidence

With access to 1M+ customer reviews and the pros’ work history, you’ll have all the info you need to make a hire.