Norristown, PA
52 Sheet Metal Fabricators near you
Where do you need the sheet metal fabricator?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Norristown Sheet Metal Fabricators

Browse these sheet metal fabricators with great ratings from Thumbtack customers in Norristown.

Top Pro
  • 5 years in business
  • 29 hires on Thumbtack
  • Top pro on Thumbtack
Jerry C.
Verified review

Ive been looking for someone to do metal work for me for some time. I have googled and no one online offers small jobs. Then I remember a friend of mine recommended thumbtack to me so I searched for someone and found Dan. Dan contacted me and I gave him a brief description of what I had wanted done. I only had 1 picture and the picture was not the best, however, he did a great job with my paper tray rack. The job was to weld 3-4 paper trays on a sideways diagonal stance on a piece of metal with 1 above the other. He was very communicative with me. He showed me a picture before he would weld it and asked me to make any changes if needed. If I wanted to space the trays out a little more or if I wanted to add the 4th tray, and if I did it would be this certain height. If I didn't he can continue with the job. If he added the 4th tray, the cost would not increase. Honestly, Dan is a great person to work with. He even asked me why don't I just buy something to hold these trays up. I searched and couldn't find what I wanted. It was the fact that he did not push me to hire him even at the meet up to give him the trays. He gave me options tip the end. That shows the type of person Dan is. I hope to have future projects for him to do and he will be the first person I contact for any metal work, as you should, too. The best part was that he lived close enough to save me shipping it to him. NJ has cheaper gas than Philly so the drive made up for the shipping for me. The paper tray rack came out great, thanks again.

Right Way Welding
5.0
from 21 reviews
  • 7 years in business
  • 31 hires on Thumbtack
Leah L.
Verified review

Pete added a metal railing on our existing rails. He is a true artist and welder. Great experience and excellent job!

  • 4 years in business
  • 1 hire on Thumbtack
Cody K.
Verified review

It has been a privilege to know Ray, the owner of RGS Welding & Fabrication, these past 14 years. Yes, before he even started RGS Welding & Fabrication. Over those years he has worked on several jobs for me. All of which were done in a very timely manner with NO deviation from quality what so ever! Over these years i have come to use his welds as a basis for comparison as to what good welds should look like. I have seen him weld on carbon steels, stainless steels, aluminum, and titanium. Let me tell you, i always thought his TIG welds looked beautiful to begin with but seeing his TIG welds on titanium took it to a new level. The man knows what he is doing, has a great business sense, is down to earth, and an all around good guy! He is without a doubt my go to welder/fabricator. Thank you Ray for all the help over the years!

No job too big or Small
5.0
from 4 reviews
  • 2 hires on Thumbtack
Brian J.
Verified review

Shaun's work is outstanding!!!. He is both creative and professional. Additionally, he finished the project I requested in a timely manner. I highly recommend that you contact him for any of your design or fabrication needs.

  • 5 years in business
  • New on Thumbtack
David M.
Verified review

This is a great guy. He shows up when he says he will and he did a fine job welding a vintage travel trailer frame. Some of the repairs took some imagination and fabrication and Justin had no trouble with any of this. I highly recommend this welder.

  • 4 years in business
  • 2 hires on Thumbtack
Eric W.
Verified review

We were extremely pleased with the product and service from Twisted Concepts. We needed an exterior railing installed to meet Norristown code requirements and Twisted Concepts was extremely accommodating. They got the railings built and installed quickly and on time, Joe (I believe that was his name) even added some very nice embellishments. Our railings now make our neighbors' railings look like chumps. I would not hesitate to call Twisted Concepts for any future projects.

  • New on Thumbtack
About

Scott's Metal Shop offers screen printing for any special occasion or just for fun! I am also a welder for the past 20 years with a lot of experience. I can fix or make anything for you! Check my eBay out and look for custom welder. Also, feel free to contact me by e-mail or telephone for any question.

About

We do welding and metal fabrication services. We specialize in wrought iron railings. We also do residential or commercial repairs.

  • New on Thumbtack
About

We fabricate and weld steel, aluminum, and brass on location or on shop. We have 30 years of experience. We can weld anything.

About

I do quality metal fabrication and have attention to detail with superior craftsmanship. I work on welding aluminum, stainless, and carbon steel.

  • 13 years in business
  • New on Thumbtack
About

We do custom wood and metal work. We treat every job as if it were a million-dollar project and as if it were our own! Customer satisfaction is our main concern and pleasure!

  • 13 years in business
  • New on Thumbtack
About

Rick The Welder specializes in mobile welding of steel, stainless and aluminum. I offer on-site service for things like truck, trailer and RV repair, heavy equipment repair, marine welding at your dock or marina, and commercial and industrial welding of structural steel.

  • 5 years in business
  • New on Thumbtack
About

We are real people who understand you and what at a fair and respectable price is for a real person.

  • New on Thumbtack
About

" If it's made of metal, It's made for us!" xxxxxx

  • 1 hire on Thumbtack
About

I have been welding for over 30 years. I can weld/fabricate almost anything out of aluminum, stainless steel or steel. I have worked on everything from aircraft components to lawn mowers. I do metal art, and refurbish boats, cars, trailers, lawns, etc. I stand behind everything I do. No job is too small. I serve South Jersey. Give me a call.

  • New on Thumbtack
About

Our experienced personnel is proficient in steel, stainless steel & aluminum. Other services we offer is laser cutting, shearing, pipe-fitting, punching, bending, grinding, drilling and press breaking. We can repair, install and fabricate to your needs.

  • 6 years in business
  • New on Thumbtack
About

I am a welder, fabricator, fitter and blacksmith. I can fix about anything, or I can create your idea. If it's broke, I can Fix-Zt. Follow me on Facebook.

  • New on Thumbtack
About

Testing and troubleshooting within electronic systems and components are offered. The following are offered: * Forklift operation and all pallet moving equipment * Metal fabrication (machinist) * Plumbing and drains * PLC testing and troubleshooting * Electronics panel building experience * In-shop electric wiring * Small carpentry repairs * Map reading and delivery skills

  • New on Thumbtack
About

I do welding and fabrications of all types of metals alloys. We MIG, TIG or stick weld structures and we do all types of repairs.

  • 3 years in business
  • New on Thumbtack
About

We do welding an custom fabrication on trailers,dump bodies,heavy equipment buckets,race cars an anything else you may need welded or fabricated.

About

Liquid Iron Industries specializes in very high-quality automotive fabrication services. We also do custom exhaust, headers, chassis fab, roll cages, sheet metal, welding, CNC cutting and bending, engine and transmission builds, etc. We also like to use our machinery for other purposes such as sign manufacturing, decorative artwork, commercial CNC jobs, fleet maintenance, repairs, etc.

Hire skilled professionals for absolutely everything.