Find a driveway sealer near you

Find a driveway sealer near you

Find a driveway sealer near you

Confirm your location to see quality pros near you.

Zip code

Top 9 Driveway Sealers near you

Avatar for SameDay!! Everything Floors and Upholstery 🌝
Avatar for SameDay!! Everything Floors and Upholstery 🌝
8.
SameDay!! Everything Floors and Upholstery 🌝
8.
SameDay!! Everything Floors and Upholstery 🌝

Great 4.7

(72)

Great 4.7

(72)

Concrete Repair and Maintenance

In high demand
  • 236 hires on Thumbtack
Katherine G. says, "Updated review. I had a communication issue with the tech, who applied the top coat to my floors although I specifically said I did not want it. The protectant is chunking up and edging between the cracks. I had previously attempted to apply a similar protectant myself with the same result, which is why I asked for the service initially- it specifically said no protectant. I truly believe he wanted my floors to look nice and did not charge me anything additional for the floor protectant. The floor protectant will not bond to my floor surface. Make sure you know your floor materials, so you can advice the tech. Additionally, materials’ warranties or floor installers warranties may be invalidated by specific types of treatments, so make sure you communicate with the tech. Nobody wants to end up with invalidated warranties and/or damage from a failure to communicate about the materials. It’s very clear this company has a lot of experience and takes pride in their work. The tech is returning FREE of charge to remove and deep clean not just the floors, but the stairs as well. He is a very hard worker and has a track record of success. Based on the work I saw when he was here, this man definitely has top notch tools, knows how to use them, and will deep clean your floor like he’s competing in the Olympics. I also had the couch deep/steam cleaned and it was amazing! Make sure you do a good pre-inspection of the site so you can discuss the work. I am so confident the results will be spot on, I have already updated this review. He has displayed integrity and honesty that you will not find with most Harford County contractors; I have had many BAD experiences. If you have very dirty carpets or floors, be courteous and inform him, so he understands that job will require more time. More significant projects should be scheduled earlier in the day, so send pictures of your job so can get an accurate estimate."See more

$149/on-site estimate

(waived if hired)

$149/on-site estimate

(waived if hired)

Katherine G. says, "Updated review. I had a communication issue with the tech, who applied the top coat to my floors although I specifically said I did not want it. The protectant is chunking up and edging between the cracks. I had previously attempted to apply a similar protectant myself with the same result, which is why I asked for the service initially- it specifically said no protectant. I truly believe he wanted my floors to look nice and did not charge me anything additional for the floor protectant. The floor protectant will not bond to my floor surface. Make sure you know your floor materials, so you can advice the tech. Additionally, materials’ warranties or floor installers warranties may be invalidated by specific types of treatments, so make sure you communicate with the tech. Nobody wants to end up with invalidated warranties and/or damage from a failure to communicate about the materials. It’s very clear this company has a lot of experience and takes pride in their work. The tech is returning FREE of charge to remove and deep clean not just the floors, but the stairs as well. He is a very hard worker and has a track record of success. Based on the work I saw when he was here, this man definitely has top notch tools, knows how to use them, and will deep clean your floor like he’s competing in the Olympics. I also had the couch deep/steam cleaned and it was amazing! Make sure you do a good pre-inspection of the site so you can discuss the work. I am so confident the results will be spot on, I have already updated this review. He has displayed integrity and honesty that you will not find with most Harford County contractors; I have had many BAD experiences. If you have very dirty carpets or floors, be courteous and inform him, so he understands that job will require more time. More significant projects should be scheduled earlier in the day, so send pictures of your job so can get an accurate estimate."

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

What is the best sealer to use on concrete?

Because unsealed concrete is porous, it readily absorbs liquids, leading to unsightly stains and freeze-and-thaw cycle damage. For this reason, it’s important to seal concrete that will see spills or outdoor weather.

The best option for garage floors and other high-traffic areas is epoxy, which forms a hard and extremely durable surface on top of concrete. Epoxy, acrylic, and polishes are often used on indoor floors, while acrylic-resin sealers and reactive penetrating sealers are used on outdoor surfaces to repel water and salt. Locate a concrete contractor in your area to help find the best solution.

What do paving contractors do?

Paving contractors can be hired to install a concrete or asphalt driveway at your home, office or property. They can also repave an asphalt or concrete driveway that has been damaged by time, weather or heavy loads. When you are looking for a driveway contractor, request quotes from at least three professionals who are in good standing and have great customer reviews. They should do a site visit and write you a bid, detailing the work involved, materials needed, approximate length of the project and estimated cost.

The site for your new driveway will determine costs and the work required for your contractor. First, the ground must be excavated to lay a clear path. This means removing any trees, bushes and stumps. Next, the driveway contractor will grade the area, making a level surface for the concrete or asphalt. To ensure proper drainage, driveway contractors should install a sub-base of compacted gravel (or similar) 4 inches-8 inches deep, depending on your soil type. Then the concrete or asphalt may be poured and smoothed over the top. Your driveway contractor should recommend an appropriate sealant for your climate and advise you on curing time. When hiring a paving contractor, check out our tips for smart hiring on Thumbtack.

How much does it cost to redo a concrete driveway?

 Here are some examples of average costs:

  • The national average cost to hire a concrete specialist is $2,750, but that price can vary greatly depending on the work needed to repair and resurface your concrete driveway, the square footage of the project, current costs of concrete, and regional labor rates.
  • Driveway contractors average $2-$3 per square foot to smooth and resurface your asphalt driveway.
  • Resurfacing concrete driveways averages $3-$10 per square foot. Pricing can depend on repairs needed, project size and geographic location.
  • Nationally, the average cost for resurfacing a 500-square-foot driveway ranges from $2,000 to $5,000.
  • Sealant for a concrete drive can cost $20-$80 per gallon.
  • Sealant for an asphalt drive averages 25 cents per square foot.

Is it better to stain or paint concrete?

A concrete paint cover is typically opaque and covers up the color of the concrete. This means it provides significant protection to the concrete below. However, if it is improperly applied or subjected to heavy traffic, a painted concrete floor is likely to chip and peel. 

Epoxy and staining are two types of concrete floor sealer. Epoxy is a more durable but often more expensive option than a concrete stain. Epoxy forms a protective layer, while concrete stain is more decorative and requires more maintenance. Because epoxy can be more expensive than concrete stain, it is best used in high-traffic areas or in applications where low maintenance is desired.

A concrete stain, on the other hand, is quick to apply and can show off the textures of the concrete, but it does not provide a high degree of protection for the concrete against spills, salt, water and other contaminants. Staining concrete generally requires a dust mop, a pH-neutral cleaner and water to clean, while epoxy can cause resin buildup that necessitates the use of special detergents.

Find a concrete contractor near you for help selecting the right floor concrete sealer.

What can concrete contractors do?

Concrete contractors can build foundations, structures, driveways, concrete storm drains, raise or level concrete patios and much more. They can handle every step of the process, starting with framing the mold that the concrete is poured into. They then cut, assemble and tie together the rebar, giving the concrete its tensile strength. Finally, they pour the concrete in, mixing and conditioning it to ensure it cures properly. They will also take steps to ensure that no air pockets are trapped within it. 

If you have a project that requires the help of a concrete contractor, reach out to one today to get a price estimate.

What is the best finish for concrete floors?

The best finish for concrete floors depends on your personal taste. An acid stain is a bold, varied look with lots of texture and the potential for earthy tones and a natural stone appearance. A water-based stain might not last as long as an acid stain, but it gives you the choice of many different colors. Epoxy is great for high-traffic areas, kitchens, bathrooms, basements and garages. It provides a glossy, damage-resistant, non-slip coating on your concrete floors. To find out which finish is the best for your concrete floors, contact a concrete contractor near you.

What do concrete contractors do?

Hire concrete contractor services for projects such as concrete foundations, concrete driveways, slab floors and other concrete work. A concrete contractor builds structures from concrete, often handling every step of the process from mixing ingredients to building the retaining structure to pouring and settling the mix. This individual or team supervises delivery and pouring to ensure that it’s done correctly. Many states require concrete contractors to have a license.

Paving contractors can be hired to install a concrete or asphalt driveway at your home, office or property. They can also repave an asphalt or concrete driveway that has been damaged by time, weather or heavy loads. When you are looking for a concrete driveway contractor, request quotes from at least three professionals who are in good standing and have great customer reviews. They should do a site visit and write you a bid, detailing the work involved, materials needed, approximate length of the project and estimated cost.

The site for your new driveway will determine costs and the work required for your contractor. First, the ground must be excavated to lay a clear path. This means removing any trees, bushes and stumps. Next, the driveway contractor will grade the area, making a level surface for the concrete or asphalt. To ensure proper drainage, driveway contractors should install a sub-base of compacted gravel (or similar) 4 inches-8 inches deep, depending on your soil type. Then the concrete or asphalt may be poured and smoothed over the top. Your driveway contractor should recommend an appropriate sealant for your climate and advise you on curing time. When hiring a paving contractor, check out our tips for smart hiring on Thumbtack.

Do concrete contractors offer remote or virtual services?

Concrete contractors must be present to pour concrete. If you come across a profile that states the concrete contractor is offering remote services, message the contractor to see what those services include. 

In any case, contact local concrete contractors to ask whether they can perform the job under current guidelines. You can also discuss other strategies to stay safe, like virtual payments and video consultations.

How do you find the best concrete contractor?

To find the best concrete contractors in your area, start by comparing concrete contractor reviews and ratings, which can give you insight into the quality of work you can expect from potential concrete contractors. When reading reviews, pay attention to details about how long the project took and whether the customer had any disputes with the contractors. The reviews often contain photos of past work, but if you don’t see any reviews, ask the contractor to share photographs of concrete floors, driveways and other projects they’ve worked on. Look for details such as clean edges and a lack of cracking. And finally, if a concrete license is required in your state, ask to see the contractor’s credentials. 

Is a concrete floor cheaper than wood?

Yes, concrete floors are generally more affordable than hardwood floors. Generally, a concrete floor costs between $2 and $15 per square foot, while hardwood floors cost between $12 and $20 per square foot, according to Floor Critics. While concrete requires preparation and pouring, its ease of finishing makes it a very affordable flooring option. Choose between finishes like acid stains, epoxy and more. While hardwood is not cheap flooring, it offers warmth and durability with infrequent maintenance.

If you're stuck between installing wood floors or concrete floors, reach out to a flooring installation professional near you

There are 11 five star Driveway Sealers in Ashburn, Virginia on Thumbtack.

Why hire professionals on Thumbtack?
Free to use

You never pay to use Thumbtack: Get cost estimates, contact pros, and even book the job—all for no cost.

Compare prices side-by-side

You’ll know how much your project costs even before booking a pro.

Hire with confidence

With access to 1M+ customer reviews and the pros’ work history, you’ll have all the info you need to make a hire.