Austin, TX25 custom metal fabrication services near you

Where do you need the custom metal fabrication service?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Austin Custom Metal Fabrication Services

Browse these custom metal fabrication services with great ratings from Thumbtack customers in Austin.

Top Pro
Welding works
5.0
from 44 reviews
  • 9 years in business
  • 51 hires on Thumbtack
  • Top Pro on Thumbtack
Ben A.
Verified review

Thank you Luis for repairing an antique playscape for our grandchildren. The work is as good as the original done by my grandfather. I certainly recomend you to anyone needing metal work.

  • 47 hires on Thumbtack
Jennifer C.
Verified review

We recently used TUR Demolition & Construction for a back porch addition. We've never been happier with a service, and plan to use them for all our future home remodeling. It's a BBB Insured small family business. And within their family there doesn't seem to be anything they can't do. They did plumbing work, electrician work, custom cabinets, roofing, concrete. From the beginning stages, the communication was great and they were very flexible with me as we imagined what this porch would look like. They ended up delivering an even better product than I had imagined. The project was painless, they were consistent with their time every day and stayed and worked until they were in a good place for the next day. At the end of each day, they tidied up their tools and set them aside to keep the backyard clean. It was so nice working with the same people throughout the process. We've had work done in the past where the GC comes in, negotiates a contact, sends different crews day to day and checks in here and there. With this company you are working with the GC everyday. He's doing the work, alongside his team. I can't say enough about their quality work. You'll just have to give them a call and see for yourself :)

Ransom Metalworks
4.8
from 11 reviews
  • 12 hires on Thumbtack
Liz O.
Verified review

Joseph did a fantastic job, and we couldn't be more delighted with his work. My company hired him to build 3 large metal frames that became the base for a large "Living Green Wall" (we're a flower company). We explained what we needed with the specs, and he completely understood the constraints and material requirements. He was also able to sketch out what he envisioned, and worked us to make sure they were structurally sound. His welding work was clean, smooth and within our price range. Very happy with the work, will definitely hire him again for all of our TX welding needs.

Guerrero Custom Fencing
5.0
from 10 reviews
  • 2 years in business
  • 6 hires on Thumbtack
James J.
Verified review

Did a great job installing a metal fence. Work was done fast and to my exact needs. Would definitely reccomend these guys are great!

CHV
5.0
from 7 reviews
  • 8 years in business
  • 9 hires on Thumbtack
Ronald C.
Verified review

Nolan did an excellent job of building a custom frame from square steel tubing to support a new granite countertop for our outdoor kitchen. The top required additional support and a slight rise in elevation in order to work for the granite slabs. Nolan was very professional and did the work quickly and within a very reasonable budget. His measurements of what we needed resulted in an excellent fit for the countertop. His metal working skills are very good!

RCT Welding
5.0
from 6 reviews
  • 4 hires on Thumbtack
Will N.
Verified review

Completed some large metal planters for my front yard. The craftsmanship and work was well done and in a timely matter. Could not have asked for better work.

  • 5 hires on Thumbtack
Bethany B.
Verified review

Jesús and his father did a fantastic job making me a custom kitchen for my tiny home. They normally do light fixtures, but they are both such skilled builders and metal workers. They were great to work with, highly recommended!

  • 28 years in business
  • 2 hires on Thumbtack
Aimee R.
Verified review

Lindy is in the process of doing landscaping for my husband and me. Her work is excellent. It includes taking down trees, cutting back growth, putting in a metal fence, suggesting plants and planting them. I highly recommend Ms. Lillard and her company.

  • 2 years in business
  • 3 hires on Thumbtack
Jeff L.
Verified review

Hired for 6 custom metal panels, S&J delivered them correct, quickly, and for a fair price.

Johnson Fabrication
5.0
from 4 reviews
  • 2 years in business
  • 6 hires on Thumbtack
Heather A.
Verified review

Loved our custom metal art!!! Fast turn around and BEAUTIFUL result!

DOB Fabrication
5.0
from 3 reviews
  • 3 years in business
Shaney C.
Verified review

I've worked with DOB on several landscape projects, from custom steel planters at Hotel San Jose, a very tricky 30' pedestrian bridge, and countless fences. Regardless of project size, DOB is creative and insightful, resulting in a project that is installed efficiently and beautifully.

IRONTEK Metal Works
5.0
from 3 reviews
  • 3 years in business
  • 7 hires on Thumbtack
Kevin A.
Verified review

I had a fairly complicated project with some very heavy metal beams as support for a cantilevered deck over a cliff. Johnny and crew worked with me to figure out the safest and best way to get this job done and they got it done. They demonstrated a professional manner and were very easy to work with. Great business communication skills as well, which is very important to me. I will be using them on the next phase of this project which is custom stair railing and the railing for this deck. K A

ZAM's Anvil Metalworks, LLC
5.0
from 3 reviews
    Bob B.
    Verified review

    ZAM’s made detailed custom hardware for a set of antique Mexican doors that fits right in with the character of the doors but has a contemporary feel. It’s a functional work of art.

    David Hunsberger
    5.0
    from 1 review
      Ruben A.
      Verified review

      Very well rounded welder/fabricator. Can do everything from the finest detail work with exotic metals such as stainless steel, aluminum and Titanium to structural steel work.

      Ferguson Fabrication
      5.0
      from 1 review
      • 1 hire on Thumbtack
      Jake G.
      Verified review

      I had some warehouse racks that I needed to be welded together and I was on a time crunch. Forrest got back to my request very quickly. He and his son showed up when they said they would and gave me a quote and got started the same day. They finished the job quickly doing quality work and were very friendly and professional.

      VSM Sheet Metal
      1.0
      from 1 review
      • 1 hire on Thumbtack
      About

      My work stands out because I enjoy different and complicated projects. I make sure that I have all of the details so that it is done correctly.

      About

      We do custom metal fabrication, design, and repair. We do ironwork; including gates, railings, chassis and roll cages. We do custom trailers, special projects and one off designs. The past projects include the "Red Eyed Fly" outdoor sign, "Jack Allen's Kitchen" patio and overhead steel and bars, the "Surf and Turf" food trailer downtown, the design and build of a mobile hairdressing airstream, and numerous custom ornamental gates.

      About

      We do metal work, as it pertains to: * planters * indoor and outdoor furniture * water features * shade structures * railing * gates * fire pits * screens * shelving and shelf brackets * signage and letters * birdbaths * fabrication and repair of parts and components

      About

      There is no minimal fee, no setup fee and no hourly rate. We charge by the job. There is no job that is too small!

      About

      Certified welding, metal arts, decorative, structural

      About

      Based in Austin, Texas, The Magic Anvil is a family owned and operated business. The Magic Anvil was started by Maged El Sariakoussy and grew out of his desire to spread the beauty of hand-forged metal art to everyone that appreciated it. Maged strongly believes in providing his customers with quality, one of a kind hand forged pieces of art. Whether he's making a custom table, railing, stairs (including spiral), trellis, arch, gate, chair, bed, table, knife,cross, sconce, barbecue smoker, or one of a kind decorative piece of art, Maged gives each project the same level of high quality workmanship.

      Q & A

      Answers to commonly asked questions from the experts on Thumbtack.

      How many types of welding are there?

      Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

      • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
      • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
      • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
      • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
      • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

      How long is welding training?

      Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

      Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

      Where can I take welding classes?

      Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

      How much is welding training?

      The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

      Hire skilled professionals for absolutely everything.