Tell us what you need so we can bring you the right pros.
Receive quotes from pros who meet your needs.
Compare quotes, message pros, and hire when ready.
Browse these aluminum welders with great ratings from Thumbtack customers in Denton.
Welded a aluminum motor mount to a skateboard truck. Great communication and quick service. Definitely will use them again.
I'm restoring a 1956 Ford C600 - - a BIG truck - - and needed someone who could operate a MIG welder to repair 59 years worth of cracks and rusted-out areas on the truck's cab and fenders. Chad recommended one of his welders named Yoshi. Yoshi arrived on time, worked efficiently and diligently. The cracks are repaired and the rust holes filled. I'll be using Yoshi again to repair damaged areas of the truck's doors and hood. Great job!
Matt did a great job welding some broken parts on an arm of a stainless steel swing-arm floor lamp! He was readily available for the job, and communicated quickly for the the logistics of scheduling it, and getting there. He was very thorough, patient, and skilled in his work, and took all the time that was necessary to do the job right. His pricing for the job was way more than fair, and very honest. I was (and am) very satisfied with his work. And, he is a very nice guy! Matt will be the one I call, the next time I have any welding or machine shop work that needs to be done. ~Steve B. in Dallas
One of the best pros anyone would ever have the chance to work With. His welding skills far exceed other welders I’ve worked with in the past. He came to me and stayed to even teach us welding, helped me fix my truck door and was one of the most polite and stand up men you’ll ever meet. Everything he does is professional and I would highly recommend him to Anyone. Not only that but his prices are fair especially for the work quality he puts in ifmanything he should charge more great work value!
By far one of the best welders i found,the job was done fast, on time and very clean. Desi was very professional and knowledgeable. the best thing was that his prices are great compared to other contractor. I will definitely recommend and use D&M welding.
If your looking for a professional welder and metal fabricator, look no further. I couldnt be happier with the outcome of our job from Goldermann Welding. These guys have a wealth of knowledge in the industry and were very professional from start to end. They worked hard from dawn and into the evening until the job was done. Thanks!
My mother-in-law had very specific barstools that were practically custom to her kitchen. She didn't want to get rid of them but they were in bad shape from general wear and tear over the years. I had happened to come across Jesse's information when reaching out for welders or any type of professional that was willing to tackle this project. Jesse came across as a sincere, friendly and hardworking professional. He emailed me to ask me some questions about the project and I sent him some pictures of the barstools. He didn't oversell his abilities or make wild claims about how he could or would transform these chairs. Based on the pictures, he made realistic assessments as to how the barstools could be salvaged and how much he would have to change the aesthetics of the barstools while still retaining their original charm. It was very important to my mother-in-law that these barstools not sway too far from their original look as they matched her kitchen very well. She was however, looking for strong reinforcements throughout the structure of the barstools, including the foot holders, shaped like rings, that were made from wood and had major cracks in them or had fallen off completely over the years. She wanted them reinforced with metal mainly or any element that could withhold weight so she wouldn't be left with broken foot stools in the future. She had also wasted a lot of money over the years hiring pros to repair or replace the wood and this time, she was looking for a more permanent fix. I had spoken with a few other welders or similarly skilled pros but some of them were quoting me crazy prices right out the gate while one other didn't even have the courtesy to ever return my texts or voicemails after our initial conversation. It was for the better because I doubt any of them could have transformed the barstools the way Jesse did and he was open to but realistic with my budget! The attention to detail on those chairs is stellar. My mother in law loves her barstools and received many compliments on the work Jesse did to restore them. He even went the extra mile to paint the reinforcements a rich color to enhance the beauty of the chairs, which was not an easy feat. There's no doubt that Jesse takes great pride in his work. He underpromised but definitely over-delivered! I'd like to add that I hired him for this project early last year and just got around to writing him a very well-deserved review. The fact that I felt compelled to submit a review for him after so much time has passed since he completed the work is in itself a testament to the quality of workmanship Jesse brings to the table. He truly transformed those chairs without sacrificing their original charm and beauty! My mother-in-law still thanks me for having found Jesse and saving her barstools!
~ Automotive bolt would not budge ~ Following several emails to describe the job and a text to confirm day and time, the Welder, Adam Chirdo, arrived at the mutually agreed time. He was well groomed, courteous, polite, and his truck was well equipped with state-of-the-art welding gear. The job was to remove a stubborn and stripped out torx-head bolt from an automotive engine block. He assessed the job, accepted my suggestions, and proceeded to construct a special "lever " system using 3/8" steel rod. The rod was welded on the bolt-head, and using a "cheater" bar, the bolt was loosened and removed from the engine block. Prior to Adam's involvement, I had tried to remove this stripped Torx head bolt using several techniques, but was unable to do so. This was an occasion for a skilled welder. I would certainly recommend this young man to anyone who needs an arc, or acetylene torch, welder. He demonstrated both types of welding skills to my satisfaction. Thanks, Adam, for a job well done! John Q. Adams Professor of Biology Fort Worth, Texas
Adams, Is very very good at what he does as a welder. Thank you for the great work, comparable price and overall follow up. Highly recommended.
Tony did a great job for us. He installed ceramic tile in our kitchen and laundry room and it looks fantastic! I appreciated his quick initial response to my request for quote, his affordable cost and his continued communication throughout the installation.
job done quickly and quality work. aluminum welding is not a common skill and they hit the mark. will use in the future.
I've known Jake for almost ten years and he is a top notch welder but foremost a superior craftsman. 10 star rating from me!⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️
Pete is a great guy and fantastic welder. Without being asked, he added reinforcement plates to his weld and blended it into the assembly with a coat of paint. Affordable and fast. Will recommend and use again - JL Kitz
Mr. Summer is a very good person and friend. He offers alit of good advise.
I am an 18-year-old welder. I passed 2G, 4G, 6G bend test. Stick, MIG, TIG, gas and brazing courses are completed at Green River High School. I recently moved back to Texas, and I am seeking work.
Welding - I love doing it. I make metal art and I paint. I try to bring an artistic eye to improve any situation. I service gates and access control systems. I have serviced gates and accessed control systems for over 5 years.
I'm a certified TIG and MIG welder. I can also read blueprints. I am a fit up and layout fabricator. I can weld stainless steel and aluminum.
We are a radiator repair and service company. We work on personal automotive and large industrial machinery. We specialize in aluminum welding. There is no job that is too big or too small for us. Give us a call to see what we can do for you.
Here at Big Boys, we emphasize pride in our work and satisfaction to our customers. Welding is what we do, and we do it well. You will also find that we're more reasonable than the most.
I am a welder, and I have 18 years of experience in mig, tig, flux core, and hard surface. I know how I use all tools that I need for welding.
I am a certified welder looking to pick up side jobs until I can start my own business. If it contains metal, there's a good chance I can weld it together. I have my own welder and can travel to you in order to get the job done.