Flower Mound, TX39 Metal Workers near you

Where do you need the Metal Worker?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Flower Mound Metal Workers

Browse these metal services with great ratings from Thumbtack customers in Flower Mound.

Carl's Welding and Repairs
4.8
from 119 reviews
  • 139 hires on Thumbtack
Debbie M.
Verified review

I needed some metal baseboards for my kiosk and Carl was great to work with. He is a very nice man and knowledgeable in what he does. I do appreciate his "can do" attitude and friendliness. I recommend him highly. He did a great job!

Ascot Fence
4.6
from 52 reviews
  • 9 years in business
  • 73 hires on Thumbtack
James P.
Verified review

Whereas Ascot did a great job on the fence, they also were to install box covers over the metal poles to give a polished finish to the unfinished side. This being said, his crew does not understand how to properly install box covers therefore leaving me with a poorly installed bunch of covers! This was discussed with Andre and he agreed the quality was lacking - only reason I didn't rate him lower was his agreeing that his installers need training on box covers as they do not do this very often. The fence itself is well built, with the exception of a couple places where the boards were not raised above ground level leaving the bottom to be placed on the ground therefore leaving the boards to early rot! Price was very good (lowest of 6 bids) and Andre is more than willing to correct deficiencies- only negative is if you are not on site checking progress of work, you may have some minor issues as I had! Would recommend.

  • 10 years in business
  • 93 hires on Thumbtack
Trey T.
Verified review

Quality work, fence is solid metal. Better than the screw together kind. We did have some communication issues on a smaller part of the project to fix a pre-existing driveway gate. Chad was willing to work to find an agreeable solution that we both were ok with considering the circumstances.

Raleigh Fence
4.9
from 33 reviews
  • 14 years in business
  • 38 hires on Thumbtack
Steve Z.
Verified review

Great communication, Great iron work! New gate put into an existing iron fence in just about 2 hours. Would highly recommend!

Dynasty welding and 4x4
4.0
from 31 reviews
  • 1 year in business
  • 42 hires on Thumbtack
Prashant B.
Verified review

I would give Brandon a very high rating for the Professionalism and responsiveness to my queries . I haven't had a chance to completely analyze all the paint job ( there are about 46 pieces in my job work) , but from what I have seem so far , his work is just pure amazing . I would surely use his services for any new job work I might have and highly recommend him to anyone else having any metal related work . Great job Brandon .

Dsol welding services
5.0
from 16 reviews
  • 15 hires on Thumbtack
Luke W.
Verified review

David custom crafted me a pull-up rig for my home garage gym. He took the time and care to use the exact specifications of one I had seen on the internet and even helped me in making sure it would fit in my garage space and stud mounting pattern when mounted. I paid a fraction of the price of what I would have paid online for a similar pull-up rig and, in my opinion, my rig is sturdier because the entire piece is welded. Best of all, he did it in only a couple of days, so I didn't have to wait on one to be shipped, if I had bought online. He even assisted me in mounting it upon delivery. I wouldn't hesitate to use David again for any custom garage gym needs or other custom metal fabrication pieces.

Goldermann Welding
5.0
from 15 reviews
  • 5 years in business
  • 20 hires on Thumbtack
Sherri F.
Verified review

Steve was GREAT! Would call him again & recommend to friends and family. He showed up when expected and with all tools & supplies needed. He took the time to complete this job perfectly. Our project was a wrought iron metal fence across the back yard. We wanted one smaller end section turned into a gate allowing us outside access. He cut, welded, sanded & painted the prefect gate! Looks like it was always there! When I first posted this project, I immediately got 2 quotes. Steve was $300 below the other quote! Super nice guy...highly recommend! Job date 9/21/16

Probity Metal Products
5.0
from 8 reviews
  • 2 years in business
Farris V.
Verified review

I know both of the owners, have worked with both, one worked for me , an I have worked for one. They are both two of the top metal workers in Texas, i would trust them with any of my metal needs! (We are not affiliated in the same occupation)

Arko Ornamental Iron Works
5.0
from 5 reviews
    Francisco C.
    Verified review

    Arko ornamental iron works did a great job on my new metal fence! I highly recommend them! Great pricing!

    • 18 years in business
    • 4 hires on Thumbtack
    Francisco C.
    Verified review

    I had two fenders a quater panal and a couple of other small but delicate stress fractures on my car. Dwayne arrived on time and did an incredible job of repairing all of the damages. Very experience and pays close attention to details! I would highly recommend him for any welding job!

    • 13 years in business
    • 3 hires on Thumbtack
    Daryl P.
    Verified review

    Built gates for Yard fences.. both Steel sliding gates and metal framing for board on board cedar. Installed soft and facia in Hardi and Smart side, caulk ed and painted. Bathroom remodels as well..

    Rockin. S. Welding
    5.0
    from 3 reviews
    • 7 years in business
    • 3 hires on Thumbtack
    Mike N.
    Verified review

    Wow! Robert really is a rock star in terms of quality and reliability. He did exactly what he said he would and provided very knowledgable options. We will definitely be calling again. I couldn't be anymore happier with how our metal pool fence was repaired for our hotel. Thank you!!!

    Home Grown Metal Fab
    4.3
    from 3 reviews
    • 4 years in business
    Cody K.
    Verified review

    Nathan did a great job welding up my rear ranch hand bumper to the frame of my truck. Great price and great service. HIGHLY recommend his work.

    Texas Multi Service
    5.0
    from 2 reviews
    • 1 hire on Thumbtack
    Amy R.
    Verified review

    I was very pleased with the pricing and the quality of the service we received on our wrought iron fence and painting of our patio furniture. Both were excellent!

    About

    IF IT IS WORTH DOING ITS WORTH DOING RIGHT EVERTHING SQURE AND PLUM GOOD WELDS NO MISSED WELDS OR SCEWS

    About

    We fix and weld metals to your specifications. We can use MIG, TIG, stick, flux-core. We have our own protective gear.

    About

    Since 1981 we have been offering comprehensive metal fabrication to Gainesville, Texas and surrounding areas. With 30+ years of experience, we have worked on all types of projects and worked with all types of businesses.

    About

    We provide all types of concrete and stone work including the following: * foundations * driveways * sidewalks * retaining walls * staining * stamping

    About

    All of my work is critical and requires the utmost attention to safety laws set by federal agencies. It is very satisfying to complete a job and help bring a customers thoughts into reality through 3D-drawings, fabrication expertise, and retain professional welding knowledge to execute all processes of welding

    About

    We are here to serve you with the best quality work that can be offered and with the durability of a lifetime. We have the best leading welders and masons who go by a step-by-step process to meet your specifications. We are here to work for you. You imagine, we design, and together, we create the impossible.

    About

    We do metal buildings, roofs, fences and subcontracting. I do all my own bids personally at site -- metal only.

    Q & A

    Answers to commonly asked questions from the experts on Thumbtack.

    How many types of welding are there?

    Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

    • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
    • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
    • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
    • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
    • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

    How long is welding training?

    Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

    Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

    Where can I take welding classes?

    Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

    How much is welding training?

    The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

    Hire skilled professionals for absolutely everything.