Georgetown, TX9 Mold Removers near you

Where do you need the mold remover?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Georgetown Mold Removers

Browse these mold removal with great ratings from Thumbtack customers in Georgetown.

Austin Steam Clean
4.3
from 44 reviews
  • 18 years in business
  • 98 hires on Thumbtack
Clint B.
Verified review

Chris did an awesome, thorough job on my carpets (5 bedrooms, living area, nook, and stair case). He took the time to do the job right and it shows. The pet stains I once had are completely erased, and the whole house smells fresh and clean. I was on the verge of replacing the carpet, but now with the carpet looking new I can put that project on hold. Chris shared his expert knowledge (20+ years experience) with me at each step. He offered helpful tips to treat future stains myself. When I next get my tile floors cleaned and sealed, I will definitely call this company again. A+

Total Source Remodeling
5.0
from 27 reviews
  • 7 years in business
  • 31 hires on Thumbtack
Lori V.
Verified review

Greg removed our carpet and put down tile floors in the living, dining and hallway area of our home. He was professional in everyway, on time, did what he said he would do and finished when he said he would. We are very pleased with him and his work and will use him for any further projects.

Restoration 1 of Round Rock
5.0
from 16 reviews
  • 2 years in business
  • 19 hires on Thumbtack
Antonio J.
Verified review

I normally don't leave reviews but for this service I have to. Mike and Mike both were very helpful with my mold situation. My kids bathroom had mold spots all on the ceiling. Instead of Restoration 1 giving me some standard mold removal estimate, they came to the house to actually diagnose my problem free of charge. They gave me the honest truth about my situation (it wasn't as bad as I thought) and gave me the do it yourself low cost remedy. I know a lot of professionals would not care to share that information and lose out on money. But for Restoration 1 to not be in the business off just taking peoples money they have earned my business for life. Go to Restoration 1 of Round Rock for your mold removal or restoration service!! Satisfied Customer of Central Texas

Certified Restoration
4.9
from 9 reviews
  • 30 years in business
  • 9 hires on Thumbtack
Andrea E.
Verified review

We noticed mold in our ceiling, and had no idea how big of an issue we had on our hands. John came by for a free consultation, and gave us tons of advice. He actually walked us through the steps we'd take if we chose to do it ourselves, and was very friendly and helpful. We ended up attempting the project ourselves, with the idea to call John if things got out of hand. We were lucky that it turned out to be a very small leak, so we were able to handle things on our own, but his advice really helped! If we have an issue in the future, we will certainly give him a call.

About

Mold Remediation, Mold Removal, Mold Testing, Mold Inspection

About

The Austin division of Mold Remediation Pros represents the finest quality water damage mitigation and mold removal services in the great state of Texas. We ensure every project is done to code and that the end customer is 100% satisfied.

About

From a Sheetrock patch to a kitchen revamp, call us today. No job is too small. We also offer fence repair, lawn and garden, mold and mildew treatment, pressure washing, tree trimming, hedge trimming and stump removal. You may call us for more information.

About

No matter what the job at hand is were performing, we take ownership and treat it as if it were our own. When the customer is explaining what it is in which theyre needing, we listen, we then ask questions and clarify that we have understood what they are wanting. Bottom line, because we truly care!

About

I am a licensed mold contractor and restoration expert. I do fire, flood, and any disaster cleanup. I am available 24 hours a day. Same-day service is available; we handle all insurance claims for our clients.

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

What is a mold remediation?

Mold remediation is the process of identifying and removing unhealthy levels of mold that have colonized in a home, office, school or other building. Over time, if untreated, mold can destroy a home by breaking down cellulose-based materials (like wood or ceiling tiles) and causing a slow and messy decay. In the shorter term, a mold infestation can cause severe health problems. According to the Federal Emergency Management Agency (FEMA), mold can trigger respiratory problems, nasal and sinus congestion, eye irritation, nose or throat irritation, skin irritations, problems with your nervous system, and aches and pains. Mold inspection and mold remediation are often requested in tandem, although they are two separate services. Nationally, mold inspection costs range from $250 to $300. If mold has been positively identified in your house, either by visual examination or through mold testing, remediation can safely remove it. Properly trained and equipped professionals use specialized equipment (like vacuums and air scrubbers with HEPA filters) to keep mold spores contained while they remove contaminated materials and treat infested areas with antimicrobial spray. A key component to a successful mold remediation after eliminating the mold is ensuring that the water source that caused the mold infestation is also resolved.

How does mold remediation work?

Mold remediation can eliminate mold colonies from your home or business. Mold is a normal part of daily life, but in wet or humid settings mold can quickly colonize and spread by making spores. Whether visible or hidden, untreated mold can cause real health problems and cause extensive (and expensive) damage to your property. Mold remediation involves killing the mold, removing the dead mold and preventing future mold growth. Here is an example of the steps involved in professional mold remediation:

  • Contain work area and apply negative air pressure HEPA air purifiers to prevent cross-contamination. If spores spread, the colonies can easily regrow elsewhere in your home.
  • Mist an EPA-registered antimicrobial to suspend and kill mold spores.
  • Remove affected building surfaces.
  • Bag and dispose of contaminated materials properly.
  • Treat cavities/underlayment and dehumidify.
  • Abrasively remove dead loose mold.
  • Apply EPA-registered protective sealer.
  • Perform clearance testing.

Remove containment materials.

How is a mold test done?

Mold testing can help identify a mold infestation in your home or business. Mold inspection costs can vary based on the type of test you want done and the number of samples you request. The national average mold inspection cost is $250-$300. The EPA explains that if you have a visible mold problem, in most cases sampling and testing is unnecessary. However, if you have unexplained and potential mold-related illness or can smell mold in your house, mold inspection costs may be a good investment. To avoid unscrupulous testers, the EPA recommends working with a testing agency that adheres to the analytical methods laid out by professional organizations such as the American Industrial Hygiene Association or the American Conference of Governmental Industrial Hygienists. Mold inspection costs can vary based on the type of testing done. Prices can also vary, depending on the size of the home, the number of surface areas to be tested, and the extent of the mold infestation. Here are some examples of mold inspection average costs:

  • Swab testing: $200-$300
    • A professional collects a surface swab from a potentially infested area for testing in a lab. Some professionals have concerns about this being the sole test done because it only gathers a small amount of data from a certain area of the house. That’s why it’s frequently done in conjunction with air cell testing.
  • Air cell testing: $250-$350
    • A professional collects an air sample in the home to measure the amount of mold spores in the air. This test is frequently done in conjunction with swab testing to ensure more complete data. Costs are higher for this test because the equipment required of the contractor is more expensive.
  • Both air cell and swab tests provided by the same company: $400-$600.

How do you get rid of mold?

Mold is a naturally occurring and important part of our ecosystem. That said, excessive mold can actually be hazardous to your health. Mold remediation is usually the best strategy to get rid of unhealthy levels of mold in your home or office. If you’re not comfortable working with mold or the area is larger than 10 square feet (3 feet by 3 feet), it is highly recommended to hire a mold remediation professional to resolve the problem. However, if you’re DIY-savvy, don’t have any health risks, and are not freaked out by mold, the EPA gives homeowners the greenlight to clean mold areas that are less than 10 square feet. Here are some EPA-recommended DIY cleaning tips:

  • Fix plumbing leaks and other water problems as soon as possible. Dry all items completely.
  • Scrub mold off hard surfaces with detergent and water, and dry completely.
  • Throw away absorbent or porous materials (like ceiling tiles and carpet) if they become moldy.
  • Avoid exposing yourself or others to mold.
  • Do not paint or caulk moldy surfaces. Clean up the mold and dry the surfaces before painting. Paint applied over moldy surfaces is likely to peel.
  • If you are unsure about how to clean an item (art, fine furniture, etc.) consult a reputable specialist affiliated with a professional organization in their field.

Is mold damage covered by insurance?

Mold damage may or may not be covered by your homeowner's insurance. Mold damage is caused by standing water and excess moisture. Mold damage can be covered by insurance when an item already covered under your homeowners insurance breaks accidentally — for example, if your plumbing suddenly ruptures and water floods your house, the homeowners insurance will cover part or all of the costs for the plumbing repair and any mold remediation costs necessary as a direct result of the water damage.

But you may not be able to get insurance to pay for your mold remediation costs if the damage is a result of your neglect — for example, if you’ve had a slow leak under your bathroom sink for years and have ignored the issue. If the insurer can determine that the mold damage is a result of your negligence, they likely won’t cover mold remediation costs. Also, most homeowners insurance will usually not cover mold remediation costs after a flood unless you have a special insurance rider covering your home in case of a flood. To help prevent mold damage, always keep humidity levels in your house between 30 percent and 60 percent, clean up water spills and damp areas right away, and ensure you have exhaust fans in your kitchen and bathroom.

Hire skilled professionals for absolutely everything.