Find a foundation waterproofing contractor near Irving, TX

Waterproofing a basement costs between $500 and $3,500, on average. The cost depends on several factors, including the type and extent of waterproofing, as well as the amount of labor involved to complete the job. For example, the labor cost to apply concrete sealer is about $3-$12 per square foot. And adding an interior drainage system costs approximately $700-$2,600.

There are a number of different pros who perform basement waterproofing, including specialized contractors and companies. Your best bet to ensure your basement’s waterproofing gets done the right way is to search for local professionals who can perform the service. This is easy on Thumbtack, where you can enter your zip code and the desired service, and then make your selection after viewing customer ratings, reviews and project photos.

Paving contractors can be hired to install a concrete or asphalt driveway at your home, office or property. They can also repave an asphalt or concrete driveway that has been damaged by time, weather or heavy loads. When you are looking for a driveway contractor, request quotes from at least three professionals who are in good standing and have great customer reviews. They should do a site visit and write you a bid, detailing the work involved, materials needed, approximate length of the project and estimated cost.

The site for your new driveway will determine costs and the work required for your contractor. First, the ground must be excavated to lay a clear path. This means removing any trees, bushes and stumps. Next, the driveway contractor will grade the area, making a level surface for the concrete or asphalt. To ensure proper drainage, driveway contractors should install a sub-base of compacted gravel (or similar) 4 inches-8 inches deep, depending on your soil type. Then the concrete or asphalt may be poured and smoothed over the top. Your driveway contractor should recommend an appropriate sealant for your climate and advise you on curing time. When hiring a paving contractor, check out our tips for smart hiring on Thumbtack.

Waterproofing your basement can help you prevent major water damage caused by heavy rains — which means you won’t have to pay for expensive water damage restoration services. Waterproofing systems also prevent basement flooding and protect your possessions. And by keeping your basement dry, you can also prevent mold growth (and avoid having to pay for mold remediation services). Finally, your basement floor may last longer, your sump pump will work less and your home’s foundation will be more protected if you have a sound waterproofing system.

Because unsealed concrete is porous, it readily absorbs liquids, leading to unsightly stains and freeze-and-thaw cycle damage. For this reason, it’s important to seal concrete that will see spills or outdoor weather.

The best option for garage floors and other high-traffic areas is epoxy, which forms a hard and extremely durable surface on top of concrete. Epoxy, acrylic, and polishes are often used on indoor floors, while acrylic-resin sealers and reactive penetrating sealers are used on outdoor surfaces to repel water and salt. Locate a concrete contractor in your area to help find the best solution.

Hire concrete contractor services for projects such as concrete foundations, concrete driveways, slab floors and other concrete work. A concrete contractor builds structures from concrete, often handling every step of the process from mixing ingredients to building the retaining structure to pouring and settling the mix. This individual or team supervises delivery and pouring to ensure that it’s done correctly. Many states require concrete contractors to have a license.

Paving contractors can be hired to install a concrete or asphalt driveway at your home, office or property. They can also repave an asphalt or concrete driveway that has been damaged by time, weather or heavy loads. When you are looking for a concrete driveway contractor, request quotes from at least three professionals who are in good standing and have great customer reviews. They should do a site visit and write you a bid, detailing the work involved, materials needed, approximate length of the project and estimated cost.

The site for your new driveway will determine costs and the work required for your contractor. First, the ground must be excavated to lay a clear path. This means removing any trees, bushes and stumps. Next, the driveway contractor will grade the area, making a level surface for the concrete or asphalt. To ensure proper drainage, driveway contractors should install a sub-base of compacted gravel (or similar) 4 inches-8 inches deep, depending on your soil type. Then the concrete or asphalt may be poured and smoothed over the top. Your driveway contractor should recommend an appropriate sealant for your climate and advise you on curing time. When hiring a paving contractor, check out our tips for smart hiring on Thumbtack.

When you’re having your basement waterproofed, it’s important to use the right materials for the job. A professional might coat your interior walls with masonry waterproofing products, such as sealants. The pro might also couple this with other exterior waterproofing methods, such as properly installing gutters, downspouts and drainage ditches. Talk to a basement waterproofing company near you to find out what method(s) they will use to waterproof your basement walls.

The best way to prevent moisture from seeping into your basement is to combine both interior and exterior waterproofing techniques. This method begins at construction by installing the water diversion infrastructure needed to move water away from your foundation and keep it out of the foundation materials in the first place. Then, a membrane should be installed inside to prevent any moisture that has made it past these defenses from making it all the way into your basement. 

However, always consult with basement waterproofing professionals near you to determine which method is right for your home — and your budget.

Basement waterproofing may or may not increase your home’s value — it all depends on your home and the conditions in your real estate market. However, by waterproofing your basement, you’re protecting your home’s value.  If you don’t waterproof your home, it could experience significant damage. And if you don’t repair the damage (which can be costly), you could lower your home’s value.

 Here are some examples of average costs:

• The national average cost to hire a concrete specialist is $2,750, but that price can vary greatly depending on the work needed to repair and resurface your concrete driveway, the square footage of the project, current costs of concrete, and regional labor rates.
• Driveway contractors average $2-$3 per square foot to smooth and resurface your asphalt driveway.
• Resurfacing concrete driveways averages $3-$10 per square foot. Pricing can depend on repairs needed, project size and geographic location.
• Nationally, the average cost for resurfacing a 500-square-foot driveway ranges from $2,000 to $5,000.
• Sealant for a concrete drive can cost $20-$80 per gallon.
• Sealant for an asphalt drive averages 25 cents per square foot.