McKinney, TX
71 Sheet Metal Fabricators near you
Where do you need the sheet metal fabricator?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

McKinney Sheet Metal Fabricators

Browse these sheet metal fabricators with great ratings from Thumbtack customers in McKinney.

  • 19 years in business
  • 121 hires on Thumbtack
Bryan W.
Verified review

Bruce and Co. took on a special restoration project for me involving a ornamental brass flamingo that was broken off at the legs. He figured out how to not only repair the brake at the legs but also shifted the legs forward somewhat so that the body of the bird could be brazed to the ornamental bass beneath the bird as well. All-in-all, very well done and now the ornament is stronger than original. I would highly recommend N. Dallas Wrought Iron Doors for any metal work project you might have.

Ascot Fence
4.7
from 52 reviews
  • 9 years in business
  • 73 hires on Thumbtack
Patti N.
Verified review

Best choice ever! We hired Andre to put in a driveway out to the husband's new "man-cave" metal building. The building sits up 9" and it's location wasn't exactly straight with the existing driveway which caused the placement of this driveway to be creative in order to not look out of place. Andre and his crew framed in the proposed design to give us a visual first. Which was a good thing as I noticed right away one side of the drive didn't flow right it just seemed awkward. Andre listened and gave me the opportunity to take some string to show him the adjustments I thought would make it flow better visually. Andre went with the adjustments made and we couldn't be any happier with the end results, the driveway looks great! So now that the driveways done it's my turn. The husband so pleased with the reasonable cost of the driveway and asked Andre if he could hire him to install a fence. So we're onto the next project with Andre and I'm 100% sure it will be the best. I say this because he's already helping us take back the wood we bought to exchange so it will last more than 2 years; we didn't choose the right type of wood. We so appreciate his honesty. We highly recommend Andre for your project(s).

  • 10 years in business
  • 93 hires on Thumbtack
Trey T.
Verified review

Quality work, fence is solid metal. Better than the screw together kind. We did have some communication issues on a smaller part of the project to fix a pre-existing driveway gate. Chad was willing to work to find an agreeable solution that we both were ok with considering the circumstances.

Top Pro
Raleigh Fence
4.9
from 32 reviews
  • 14 years in business
  • 37 hires on Thumbtack
  • Top pro on Thumbtack
Russell T.
Verified review

Showed up when he said he would. Actually called and asked if he could come 45 minutes early. This is good! Did a good job of repairing the weld on my tiller. I was very satisfied. I would use him again.

Top Pro
  • 17 years in business
  • 21 hires on Thumbtack
  • Top pro on Thumbtack
Jim J.
Verified review

Desi did what he said he was going to do, when he said he would do it. Both materials and workmanship were first class. The design was outstanding and the installation was both sturdy and neatly done all at a price that represented good value. He provides 5 star service at a 4 star price and I very strongly recommend him.

Goldermann Welding
5.0
from 15 reviews
  • 5 years in business
  • 20 hires on Thumbtack
Buster W.
Verified review

If your looking for a professional welder and metal fabricator, look no further. I couldn’t be happier with the outcome of our job from Goldermann Welding. These guys have a wealth of knowledge in the industry and were very professional from start to end. They worked hard from dawn and into the evening until the job was done. Thanks!

Brandon Luter
4.8
from 14 reviews
  • 11 hires on Thumbtack
Fred H.
Verified review

An artist!! His work is so good you can not see the weld. Exceptionally good at micro welding.

  • 18 years in business
  • 4 hires on Thumbtack
Francisco C.
Verified review

I had two fenders a quater panal and a couple of other small but delicate stress fractures on my car. Dwayne arrived on time and did an incredible job of repairing all of the damages. Very experience and pays close attention to details! I would highly recommend him for any welding job!

Rockin. S. Welding
5.0
from 3 reviews
  • 7 years in business
  • 3 hires on Thumbtack
Mike N.
Verified review

Wow! Robert really is a rock star in terms of quality and reliability. He did exactly what he said he would and provided very knowledgable options. We will definitely be calling again. I couldn't be anymore happier with how our metal pool fence was repaired for our hotel. Thank you!!!

Home Grown Metal Fab
4.3
from 3 reviews
  • 4 years in business
  • New on Thumbtack
Christopher L.
Verified review

I had Nathan weld up a broken door hinge on my jeep door he did a good job door closes just fine and the pin striping lines up like it was from the factory

  • 13 years in business
  • 3 hires on Thumbtack
Daryl P.
Verified review

Built gates for Yard fences.. both Steel sliding gates and metal framing for board on board cedar. Installed soft and facia in Hardi and Smart side, caulk ed and painted. Bathroom remodels as well..

Fabrication Welding
5.0
from 2 reviews
  • 1 hire on Thumbtack
Alexandria N.
Verified review

Jacob went above and beyond with my welding project. He fixed an antique wrought iron bed that I love! He even managed to match the paint color which was no easy feat!!! I could not recommend him highly enough.

All Metal Welding
5.0
from 2 reviews
  • 5 years in business
  • 2 hires on Thumbtack
Moxie Graphic Productions E.
Verified review

I pulled up while he was working and asked he could help he knew I was in a pickle and stopped what he was doing and helped me. Great service and fast welding.

  • New on Thumbtack
Shaun S.
Verified review

I am very satisfied with the welding job that Dustin helped me with. The service was quick, and now my car door opens like it should! Call Dustin if you have any welding needs.

TNT Custom Fab
3.0
from 3 reviews
  • 14 years in business
  • 3 hires on Thumbtack
Christina R.
Verified review

I couldn't of asked for a better experience! The customer service and craftsmanship from this company was outstanding. They were thorough with their work, paid attention to detail and quick with their hands. They converted a guest bedroom in my home into a dressing room and on one of the walls they put in their one of kind, custom made, fabricated heel racks and wedge shelves as storage for all my high heels and wedges. I couldn't be happier with the look and easy access to my heels. Along with the converted bedroom, in our backyard we have a chain link fence that needed some new configuring so that our trailer could be driven in and out of the backyard. At the end of our driveway and facing the alley, there was a diagonal part of the fence that they converted into a custom gate so that with our truck we could have easier access to our trailer. As you can see they have a knack for all kinds of repairs and remodeling! I will definitely hire them again for any new projects or repairs I need.

  • New on Thumbtack
About

Fully customized stainless steel work of all kinds. 10 years of experience in the food industry. Well versed in FDA and Department of Health regulations and guidelines. We do custom food trucks, residential and commercial kitchens, BBQ grills and smokers, and any repairs you might need.

  • New on Thumbtack
About

Family owned and operated, respectful, punctual, willing to go the extra 10% to ensure the customers satisfaction. Anything from a custom hinge, to an entire pipe fence, equipment repair, car ports, smaller metal buildings, custom fabrication, and just about anything else you can think you might need.

  • New on Thumbtack
About

We will fabricate any machined parts and hole punches to abrasive paper, cardboard, leather and many other industries' specifications. We fabricate any ferrous or non-ferrous parts at very competitive prices.

About

We're a family-owned and operated welding and fabrication business servicing the industry for over 25 years. QWS Express Trailers, Inc. takes pride in our products and workmanship. We also offer: * trailer parts * trailer repairs * utility trailer deals * trailer manufacturing * welding

About

Certified welding A.W.S d1.1 and A.S.M.E shop and portable welding. We also weld stainless and aluminum, shop or portable. We fabricate anything with metal. All work is done and completed in a timely manner.

  • New on Thumbtack
About

We fix and weld metals to your specifications. We can use MIG, TIG, stick, flux-core. We have our own protective gear.

Actual Requests

See other requests for sheet metal fabricators in McKinney

Need a Metal Electroplating Service

Dallas, TX

  • Project type
    Other (7door knobs which are glass and some kind of metal)
  • Plating material
    I'm not sure
  • Process type
    I'm not sure

Need Electroplating Service

Plano, TX

  • Project type
    Other (Bath Tub Faucet)
  • Plating material
    I'm not sure
  • Process type
    I'm not sure
  • Details
    Will probably be a chrome tub faucet and I need to have it refinished to oil rubbed bronze
Hire skilled professionals for absolutely everything.