Seattle, WA
6 custom metal fabrication services near you
Where do you need the custom metal fabrication service?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Seattle Custom Metal Fabrication Services

Browse these custom metal fabrication services with great ratings from Thumbtack customers in Seattle.

Poverty Bay Bumper
4.9
from 28 reviews
  • 36 hires on Thumbtack
James W.
Verified review

Kelly Martin did this right from beginning to end. I needed a small handrail on the steps from the city sidewalk to my landing. Kelly drove from Federal Way to North Seattle three times: First to scope the job and measure; second, to fit check the railing, and, finally, to install it. He provided via email a proposed sketch and photos of it during fabrication. The result was a beautifully designed, fabricated and installed handrail. I couldn't be happier. Thanks, Kelly! Craftmanship and quality service live!

ProWeld
4.5
from 10 reviews
  • 23 years in business
  • 26 hires on Thumbtack
Brook P.
Verified review

David did excellent work doing a custom metal rail for my deck as well as a side gate. David works fast (the slower part is the powder coating). Be very specific, give pictures, and measure everything! Very happy. Now I just need to get my boards put in the empty rails.

Freedom Fabrications
5.0
from 7 reviews
  • 9 hires on Thumbtack
Cameron M.
Verified review

Got myself a project car that needed some welding and Thomas was a huge help in fabricating a support piece and my new replacement part that was attached. Will definitely use again if I need to.

Brothers Metal LLC
5.0
from 7 reviews
  • 2 years in business
  • 6 hires on Thumbtack
Brad V.
Verified review

Designed, fabricated, powder coated and installed new construction horizontal picket balcony and stair railing. Great work and installed hardware matched exactly the CAD drawings and 3D renderings.

  • 4 hires on Thumbtack
Eric S.
Verified review

I had a small repair to an iron bed and Christopher did a super job at a very fair price.

Woods Welders LLC
5.0
from 6 reviews
  • 11 years in business
  • 3 hires on Thumbtack
Bob C.
Verified review

We used Woods Welders to build the Railing for the main stair in our house. We were very pleased with the work. Our designer then used them to have a custom light fixture made for the dining room. Beautiful! You should definitely work with these guys.

2500 Degrees
5.0
from 4 reviews
  • 12 years in business
  • 1 hire on Thumbtack
Lake Street Studios L.
Verified review

Rick is the only steel fabricator I use...especially in high end design. Exceptionally talented, knowledgeable and very resourceful. Terrific problem solver. My unpredictable designs are always met with interest and somehow, Rick can always make better and bring concept to reality.

  • 3 years in business
  • 2 hires on Thumbtack
Richard H.
Verified review

Richard did an excellent job for a better than good price. I'll be calling him when I have a welding job I can't handle. To top it off he personable and fun to be around. You need welding done, this is your guy - at home or on the job.

K&D Fabrication
5.0
from 1 review
  • 8 years in business
  • 1 hire on Thumbtack
About

Services offered are: * stainless steel * copper * alum * mild steel fabrication countertop * conveyors * hoppers * pizza ovens * pig rotisseries * repair/ maintenance *custom fabrication *pipe fitter/welder *stick/mig/tig 14yrs trident seafoods port of Tacoma

  • New on Thumbtack
About

We can do anything by metal. We can fix anything as long as it is metal. We do custom metal works such as handrail, handle bar, guard rail, guard bars, staircase, gate, art works, metal support for buildings or vehicles, truck racks, trailer and redesigning, and repairing for all of the list. Please ask us first. We also would like to help you on the phone.

  • New on Thumbtack
About

Sanson Machinery Group is composed of the machinery and tooling specialists in metal fabrication. Sanson Machinery Group has been in business since 1970 serving Northern California and Nevada, expanding machinery sales and service to Washington, Oregon, Idaho, Alaska and British Columbia with Sanson Northwest in 1984. We sell and service new and used machinery, which is used in the metalworking industry.

About

We design and manufacture custom display fixtures, way-finding fixtures, signs, and shelving for libraries and other businesses using wood, acrylic, metal, laminate, and glass. When you need a high-quality, customized solution, you can count on our superior products and experience. As well as the design and fabrication of your signs, fixtures or shelving, we also take care of prototyping, manufacturing, fulfillment, shipping, installation, and project management.

  • New on Thumbtack
About

We perform welding, cutting and metal fabrication. We can do on-site welding repairs, weld up cracks, and work on hard facing metal repairs.

About

We have been in the business for for more than 30 years. We specialize in, but are not limited to, fabrication, repair and modification of plastic tanks for marine and RVs. We also offer plastic displays, plastic welding, gluing, forming, bending, custom cutting, battery trays and boxes, room cabinet and accessory cleaning, and tab box pulling. The equipment we utilize to fabricate plastics is the latest and most accurate found anywhere. We are assuring you of quality work regardless of project complexity or size. We have the capabilities to assist in design concepts to meet your specifications. Techniques offered are heating, bending, plastic welding, cutting, drilling, forming, polishing, custom cutting, and machining. From cut pieces to precision machining, welding or bending, we are ready to supply all your custom plastic needs. No matter how detailed, George's Custom Plastics is ready to help with your project.

  • New on Thumbtack
About

We manufacture a wide range of products, varying from test platforms for ultrasound equipment to roller tables to one-of-a-kind prototype. We can make one or thousands depending on your volume needs. We have mostly custom parts but we can produce some standardized parts at a lower cost. Cutting, Punching, Stamping, Forming, Welding, Shearing, Painting, Powder Coating, Zinc Plating, Galvanizing We work with steel, stainless steel or aluminum. We also pay great attention to our product quality during all stages of production. We strive to maximize material, minimize waste, and optimize the fabrication process, making small to medium-scale production more achievable without sacrificing quality. A word about drawings: Good drawing speeds up the process saving time and money. Revisions are sometimes necessary, but with all tolerances and critical dimensions specified, we can make "minor" changes during the process of fabrication, if needed. Before we proceed, we will gather all the information, drawings, and/or dimensions during your product review and quote, or if you have a concept, idea, or thumbnail drawing, we could assist you in developing it for marketability or private use, if needed. Please feel free to email, call or contact us through Thumbtack. We are glad to have a chance in answering your questions if ever you have any. Honest, dependable service at a reasonable price.

About

We do manufacturing and installation of residential and commercial custom-wrought iron, such as: * gates (automatic or manual) * fences * railings * handrails * spiral staircases * furniture * light fixtures, etc.

  • New on Thumbtack
About

We bring a world of experience to your doorstep. We do custom fabrication of automotive to aerospace parts and off-site welding services for those hard-to-dismantle parts in almost inaccessible places, working with exotic metals, in exotic places (a specialty of ours).

  • 10 years in business
  • New on Thumbtack
About

We are welding and metal fabricators. We do the maintenance and repair on all metal boats, as well as all kinds of structural weldings.

About

We provide maintenance, duct cleaning, repair, system upgrades and replacements, as well as 24-hour emergency services on heating and cooling equipment for both residential and commercial facilities. We are a local, third-generation, family-owned, full-service heating and cooling company that has been providing handcrafted quality since 1937. We are Better Business Bureau accredited and fully vested for your satisfaction. We have earned Trane's Comfort Specialist status. More than 98% of our customers said they would do business with us again and recommend us to others. We have a randomly tested, drug-free workplace with factory-trained employees. We offer flexible financing options on system upgrades or replacements, from 12 months same as cash to conventional long-term options for low payments. We also provide custom sheet metal fabrication for a variety of projects. There is no project too large or small. From magnet boards, drain pans, and flashing to custom ductwork, chimney caps, and even classic car parts replication, the experts in our shop are happy to help.

  • New on Thumbtack
About

G&S is a one-man operation doing one job at a time with professional and customer satisfaction always in mind. I have over 30 years of experience in weld repair and custom fabrication of all sorts of metals.

  • New on Thumbtack
About

I am an expert in tig, mig, and stick welding. I am also an expert in fabricating metal parts such as for pipe and oxyacetylene welding. I do cutting, grinding, sanding, etc.

Hire skilled professionals for absolutely everything.