FAQs
- What is your typical process for working with a new customer?
Contact We meet with our potential customers to go over their needs and concerns about their pavement surface. Provide a written estimate. Our Sealcoating process in 5 steps 1 Prep- Clean area of dirt and debris with power broom and wire brush. Cut vegetation and overgrown grass from edges and cracks. Inspect asphalt and prime oil spots and chemical stains. 2 Crack fill- Seal major cracks with Deery super stretch polymer crack sealant. Squeegee to create low profile on surface. 3 patching- Fill potholes and failed areas in pavement with compacted hot mix asphalt as needed. 4 Sealcoat- Apply MAC PRO-BLEND hot blended rubber modified polymer coal tar sealant 1-2 coats as needed. Block area from traffic. 5 finish- After 24 hour dry time asphalt is ready for traffic. We also do a walk thru and address any defects of customer concerns.