Millbrae, CA20 Aluminum Tig Welders near you

Where do you need the aluminum tig welder?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Millbrae Aluminum Tig Welders

Browse these aluminum tig welders with great ratings from Thumbtack customers in Millbrae.

Weld Pro
from 29 reviews
  • 11 years in business
  • 45 hires on Thumbtack
Sirjit S.
Verified review

Welding a car port

Claremont Sheet Metal
from 27 reviews
  • 67 years in business
  • 39 hires on Thumbtack
Dave S.
Verified review

I actually didn't have the pleasure of doing business with Claremont sheet metal . I am posting this because although his company did not fabricate and weld S.S metal, he took the time to post about 3 to 4 referrals of company's that could help me. And who he thought was the better company suited toward my needs. To me that is Professionalism. Thanks again

  • 11 years in business
  • 7 hires on Thumbtack
James L.
Verified review

Kirk and his team performed an interior remodel and a new garage build for my house from January 2011 to July 2011. I am satisfied with Kirk’s work. He is very experienced in new constructions and remodels. He did a very good job for a very good price. Kirk also gave me lots of free extras at his expense. In March 2010 I purchased a 2-bedroom, 1-bathroom house in Union City, California. The house was in good structural condition, but as a foreclosured unit, it needed some rehabilitation. The original detached garage was in poor condition; it was badly damaged by termites and water. My intent was to have the detached garage demolished and completely rebuilt from the ground up. I planned on doing interior renovation at a later time. I found Kirk from craigslist and he had a link to his Thumbtack page. I called him and he came by to give me an estimate. He said he could give me a really good deal on a new garage and do an interior remodel for a little more than what I would have paid for the garage alone. Kirk was really enthusiastic about doing my job, much more so than the other contractors I had come to give me a bid. Kirk also had very good ideas about modernizing the interior. He suggested a bar counter between my kitchen and dining area. He would also turn my empty utility rooms into a master bedroom and master bathroom. And he wanted to create a laundry machine closet. Kirk had an architect draw the construction plans; his architect did a really nice job. He submitted it to the city as part of the permit application process. I wanted the work done with all permits so everything would be by the book. It would also help should I decide to sell the house at a later date. Kirk started out on the interior work first. He demolished the old kitchen and utility room. He built a new kitchen, a master bedroom, a master bathroom, a laundry machine closet, and a small coat closet by the front door. Kirk said he could also do a couple more things to the interior. He would do the labor for cheap if I paid for the materials. So I agreed and Kirk also replaced my front door, front window, and sliding glass door. He also remodeled my fireplace and fixed a bunch of broken things in my original bathroom. Kirk also completely rewired the house. The original wiring was a dangerous mess, a potential fire hazard. The interior work was completed towards the end of April 2011 and all the work was approved by the city inspector. It looked really nice. I received many compliments from friends and family. I am fairly picky with details and I did notice a couple flaws with fit and finish. I pointed out them out to Kirk. He and his workers did fix them. The garage work started immediately afterwards. The old garage was not worth saving so it was demolished and hauled away. The original foundation was unusable. So Kirk jackhammered it out. Kirk poured a new heavy-duty foundation onto an extensive frame of rebar. He tied it into the house foundation. Then he framed the new oversized 510 square foot garage. Kirk added a storage attic with a pull-down ladder. Kirk also poured a new driveway that looked excellent. Kirk added a 50 amp subpanel to the garage. He also gave me a bunch of free extras like wall insulation. Kirk also used roof panels coated with an aluminum heat reflective substance. The garage was completed by the end of July 2011. It looked really nice. Like the interior, I also received compliments from friends and family. The above garage attic storage with the pull-down ladder was really useful. The garage also passed city inspection. There were also a few issues with fit and finish in the garage. Kirk fixed the problems that I pointed out. While the garage was being built, Kirk also repaired my patio awning and side perimeter fence. He did an excellent job on them. One lady even drove by, stopped, and complimented on how nice the outside looks. I am overall satisfied with Kirk’s work. He really transformed my house. Since everything was done with permits, I now have a 3-bedroom, 2-bathroom house on county and city records. If you want to see his work on my house, ask Kirk to give you my phone number.

Sheldon Fabrication
from 9 reviews
  • 12 hires on Thumbtack
Kurt D.
Verified review

Sam showed up on time at my house, with pre-fabricated metal that I had specified. Very friendly and professional, great attitude, and easily performed the trailer welding, and took on some additional projects I had without issue. He cleaned up and used his time efficiently. I will use him again for other projects.

from 8 reviews
  • 12 years in business
  • 4 hires on Thumbtack
Stanley S.
Verified review

In need of a welder, I found Joe on Thumbtack. We arranged to meet and I was able to observe some of his work. It was quite good. Joe is an experienced welder. We contracted on a fair price and Joe showed up on time. I am quite satisfied with his work. He also went out of his way, without my asking, to buy extra, expensive 10-awg wire so that his 220-volt welder could reach the furthest point on my property. That went beyond the call of duty. I recommend Joe wholeheartedly because he cared for my project.

  • 5 years in business
  • 11 hires on Thumbtack
Heather C.
Verified review

Matthew helped me with several tasks around the house including a welding project. He did great work and was friendly, reliable, and creative. I would hire him again, and recommend to friends.

FMS Metal Works
from 4 reviews
  • 6 years in business
  • 3 hires on Thumbtack
Marc C.
Verified review

Matt at FMS Metal Works did a fine job from the start of the process of contacting me regarding the potential job to providing me with the proper paperwork for a job quote. The end product/project was more than satisfactory. Compared to the other bids I received from Thumbtack app he was very professional in promptly returning email/phone calls about the potential job. There were some welding vendors that did not return my inquiries about the possible project and one that wanted to start the job on the spot that day of the job quote without any type of job contract or he was not gonna do it at all. Be careful about vendors that do not want to provide you with a job estimate that both parties can agree on. Overall experience with FMS metal works was good. Will definitely do business again for future welding projects.

All American Welding
from 3 reviews
  • 25 years in business
  • 1 hire on Thumbtack
Don R.
Verified review

All American welding is Fantastic, They made a custom sidecar frame for my motorcycle, it came out far better then I could have imagined. If you need metal fabrication or welding done, you couldn't find better people. whatever your need give them a call first and you won't be disappointed. They'll give you a fair deal. I really can't say enough about how satisfied I am with their work! Call them now, now, now! No matter where in California you are you won't find a better welder. I live in Sacramento so they are an hour and a half away. A trip well worth the time! don't hesitate to call them for your welding and metal fabrication needs, from what I've seen they do it all! a happy and satisfied customer!

Marcos P.
Verified review

My name is Marcos Pareas and I am the owner of a large Bar and Restaurant in Tomales, Marin County, CA on picturesque HWY 1, in Tomales Bay. The bar uses stools exclusively for customer sitting. A number of them broke and my local welding service man will fix them but the welding will hold only 3 to 6 months. Harris fron H. Skillie Mobile Welding Service came in as a customer. I noticed that he did welding a pointed to him that I had a number of stools broken. He gave me a very reasonable bit and I gave him the job to weld them. It has been over a year and they are all holding. I was very satisfied with job done and Harris's work ethic. He will be my welder for all the needs of the William Tell Restaurant and Bar. Marcos

Professional Iron Works
from 1 review
  • 32 years in business
  • 4 hires on Thumbtack
Peter O.
Verified review

Polite, professional and willing to do anything extra to complete a quality job.

I.C. Steel
from 1 review
  • 34 years in business
  • 2 hires on Thumbtack
Rishi K.
Verified review

Ken has been great to work with!! Will call him for more projects!

Creative Welding
from 1 review
  • 2 hires on Thumbtack
Chris T.
Verified review

Eugene was extremely accommodating and the turn around time was much quicker than expected. The work itself was very well executed and I highly recommend Creating Welding.


I'm a welder experienced in SMAW, GMAW, FCAW, and GTAW. I also do oxy-acetylene welding and cutting. I'm certified and able to read and follow blueprints.

  • 1 hire on Thumbtack

We offer the following services: *Structural steel fabrication and erecting *Stairs/railing fabrication and erecting *General mobile welding


I have been welding for 4 years. I can do most light duty ferrous metals and stainless steel. I work when most people stop working on evenings and weekends. This is my second job.


We can do welding, fabrication; pre-fabrication and install of pipe fitting. We have more than 30 years of experience and are professionals in our trade. We hold customer satisfaction as our number one objective.


We cover stainless steel, glass, aluminum, cable, steel railings, and canopies, as well as all other custom fabrications. We offer structural steel-certified welding, too!


I have several years experience in commercial and structural welding. I also have experience in scenic and custom fabrication.


My services include welding, torching, grinding, fitting, JLG operation, and rigging. I do stick and MIG welding. I have been in the industrial construction field for 15 years.

  • 18 years in business

For your needed quality mobile TIG welding services, let this company help you. They have TIG welders who will complete the job with ease.

Actual Requests

See other requests for aluminum tig welders in Millbrae

Need Welder

Pacifica, CA

  • Welding type
    As recommended by the professional
  • Project type
    General welding / metalwork, Pipe
  • Metal type
    Not sure
  • Detailed service needs
    Need a frame welded, 2x2 square tubing, already cut and hit with grinder, ready for a welder
  • Work location
  • Details
    2x2 steel square tube, already cut and hit with a grinder. I have plans for the frame ready to weld
  • $150
    Average price
Hire skilled professionals for absolutely everything.