New Britain, CT10 Wrought Iron Railings Contractors near you

Where do you need the wrought iron railings contractor?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

New Britain Wrought Iron Railings Contractors

Browse these wrought iron railings contractors with great ratings from Thumbtack customers in New Britain.

Custom Woodwork ETC
4.5
from 26 reviews
  • 10 years in business
  • 43 hires on Thumbtack
Kathleen B.
Verified review

I do not even know where to start. If Bruce lived in a different time he would have been a Renaissance man. He possesses a masterful blend of artistry and intellect. The first project he did for us was to redo a simple laundry room. This entailed making templates and installing granite for a counter with a sink and a making a folding table/counter. He had to repair some sheet rock and repaint the room. The results were impressive. The second job he did was design and build a workbench for my art studio. His architectural renderings were impressive. He measured the length of my arms to insure I was able to reach the peg board behind the work bench. He thought to install a length of electrical outlets beneath the lip of the bench. The side drawers are easily opened and closed and the paper trays are large enough to hold my watercolor paper. He is extremely meticulous and his work shows this. He installed glass doors in the basement studio to allow more light to enter the area. When this wasn't sufficient, he cut through the concrete and installed a window (with molding and a sill). His masterpiece was the deck he built for us. With Bruce's skill and our artistic input he produced a showpiece deck. The three tiered deck allows for minimal visual obstruction of the woods below. He installed tiny lights on the stairs to make them safer in the evening. He thought of these. He made a portion of the deck curved to provide harmony with the landscaping. Again, his renderings were precise and impressive. He laid everything out carefully and was always thinking ahead. Our deck is magnificent. He handled all the paperwork for the permits as well. On a smaller scale Bruce hung paintings, our TV, glass doors leading to a bonus room, fixed all our leaky faucets and provided names when we needed a generator and a water softening system installed. Bruce is one of a kind in that he is masterful in so many areas and knows when to get a consult. He is prompt and ready to work hard. He put in very long hours, cleaned up and just did amazing work. I still look forward to having him finish an upstairs loft, a bathroom in our studio and build a space for a china hutch. I feel so fortunate that we found Bruce and would give him the highest of recommendations. He really is a Master of many things! He is also very easy to talk to and to work with.

KLG Designs LLC
4.8
from 21 reviews
  • 14 years in business
  • 18 hires on Thumbtack
Marissa M.
Verified review

Kevin had done multiple projects on our rental properties including decks, concrete work and installing railings. He is extremely professional , conscientious and the finished product was top notch. I would highly recommend this company. His prices are reasonable and we will continue to use him for future work .

Anthony Jones
4.9
from 14 reviews
  • 5 years in business
  • 12 hires on Thumbtack
David Y.
Verified review

We hired Anthony to rebuild our existing deck. We wanted to keep the existing frame structure and wood decking, but wanted new posts, railings, balusters and stairs. We purchased clear cedar railings, stairs and balusters which were stained, and douglas fir posts which were painted. It was a challenging job due to the fact that our deck had settled on both ends and was not very level. Anthony's patience, combined with his experience and attention to detail resulted in a better than expected result! We're very happy with the job and would highly recommend Anthony Jones to others.

ProRem, LLC
4.4
from 15 reviews
  • 23 years in business
  • 19 hires on Thumbtack
Tammy D.
Verified review

John came on time my pluming gave him a little bit on a problem but he worked through it and didn’t charge me any extra

JG Studio
4.9
from 11 reviews
  • 1 year in business
  • 4 hires on Thumbtack
Lily O.
Verified review

3rd Rail Studio put together a steel project for me and the quality of work was above and beyond what I hoped for. The attention to detail really showed & hiring them was worth every penny.

  • 17 years in business
  • 20 hires on Thumbtack
Clemens P.
Verified review

Very professional, diligent, on time, pleasant owner and crew. Did a fine job on our roof and railings up and around our front steps. Fair negotiator, saved us some. Worked in cold weather right after Christmas holiday. Would certainly call Patriot Roofing again!

CJT Development LLC
5.0
from 6 reviews
  • 23 years in business
  • 8 hires on Thumbtack
Elizabeth S.
Verified review

We needed a stair railing and balusters installed and they came out great! They were able to come out the next day and were there on time. He did an amazing job, cleaned up after himself, and was a very nice guy! I would definitely recommend using CJT!

Caetano Construction LLC
5.0
from 2 reviews
  • 17 years in business
  • 3 hires on Thumbtack
Terence B.
Verified review

Hired Gleason the owner and his crew to put down trex decking .Gleason as well as his crew are very knowledgeable and true professionals. The job took 2 days . Each day they were on time and kept the area clean after they left.There work is top notch .My wife as well as myself are true perfectionists and Gleason and his crew surpassed our expectations.If you want a contractor who does the job right and is very reasonably priced Caetano Construction and his workers are who I would choose.Many thanks to his workers and Gleason

Caro Construction
5.0
from 1 review
    Georgine J.
    Verified review

    I have used Caro Construction for four major projects now, and I wouldn't hesitate to hire them for all of my future jobs. This is a brief outline of some of his work for me personally from 2011 to present: 1. Apartment conversion: I had need of carpentry services to remodel and convert a large apartment I own into two smaller units. This required putting up walls, creating a new entryway and hanging doors, planning and installing a kitchen, and remodeling a bathroom. 2. Kitchen gut/remodel: This job was instigated by a water leak and an insurance claim, but we had the kitchen gutted to the studs and joists from the ceiling down. Mr. Caro worked in tandem with my insurance adjuster to handle the job on my behalf before I arrived in person to see the final result. He was very professional and the results were fantastic and economical. 3. Frozen pipe insurance claim: I had a hot water baseboard heating pipe in the wall burst in the middle of winter in one unit of a 4 unit apartment building. Mr. Caro once again worked in tandem with my insurance company to make repairs to the affected second story unit as well as the unit immediately below. This repair required subcontracting for plumbing repairs and flooring replacement, tearing out and replacing walls, insulation, and a ceiling. The job was done very quickly and very well, and when part of the insurance claim became an issue (some materials were not replaceable due to age - ceiling tiles from 1960) he worked with me to creatively and economically resolve the situation. 4. Replace front entryway stairs and porch repair: The entry to my 4 unit apartment building had stairs that were not mounted correctly below the frost line and they moved and rotted as a result. He tore the stairs off, leveled the entire structure, made some minor repairs replacing some floor boards and all rails, and built a new, level, much better staircase. 5. Many miscellaneous repairs and interior remodeling and finish work: over the years of getting great service from Caro Carpentry, I came to depend on him for all my maintenance and repairs for both my house and my 4 unit apartment building. I have found him to have excellent communication skills, accurate bids, and he’s very honest and pleasant to deal with. He was very professional in his dealings with me, with other contractors he brought in for specific stages of the work in progress, and gave frequent progress reports as well as communicating the next steps during the entire process. I was very pleased with the end results of all my projects. The quality of his subcontractors was also such that I have used several of them several times for other jobs, as well.

    • 37 years in business
    About

    We use high quality materials and are very picky with the quility of our craftmenship. We make sure everything is done right the first time.

    Q & A

    Answers to commonly asked questions from the experts on Thumbtack.

    How long is welding training?

    Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

    Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

    How many types of welding are there?

    Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

    • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
    • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
    • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
    • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
    • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

    Where can I take welding classes?

    Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

    How much is welding training?

    The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

    Hire skilled professionals for absolutely everything.