Here's a list of service charges.
There's a trip fee charge of up to $100 regardless if i do work or not. this is prices at this rate because this is the average price that thumbtack charges every single contractor that you talk to and especially if you instant book us. my time and gas is worth something, especially when I'm paying money before I ever get to talk to you and if you say no to my pricing (which is the medium rate on Google) then I'm just out of $100 for each person that's just window shopping.
Troubleshooting= $150 1st hr, $100 each additional
as of 2020 any replacement breakers, new lines of power, panel upgrade requires a surge arrestor which goes into the panel, this whole house GFCI system tanned from $400-$800 depending on your panel brand. most pathetic electricians will refuse to follow this law which decides you're electronic valuables from any damage code 230.67
(this code doesn't apply in Ohio... yet)
Replacement circuit breaker up to 30A up to 2 pole normal=$200 each for (homeline/ QO/ siemens/ eaton) material cost included
Replacement normal circuit breakers 50A up 70Ato 2 pole=$225 each for (homeline/ QO/ siemens/ eaton) material cost included.
replacement circuit breaker up to 30A up to 3 pole=$500 for (homeline/ QO/ siemens/ eaton) material cost included. these breakers always start around $200 each before tax.
replacement breakers that are cafci/gfci up to 70A=$500( Homeline/Eaton/Siemens/GE).
These breakers normally cost between $200-$300 each depending on the amps, brand and style.
Replacement circuit breakers up to 30A=$400 each for(pushmatic, zinsco, stab-lok, various fuses) material cost included. these breakers are not made anymore making them rare and very expensive if you find newish/ factory refurbished.
________________________________________________________
light fixtures:
Recessed lights slim=$150/ each
recessed Light mounting fixture=$120
trims for recessed lights≈$100
replacement surface mounted lights=$150/ each
install (customer owned) Chandeliers= $400 each for chandeliers that weigh less than 50lbs.
$550 each for chandeliers that weigh from 50lbs-80lbs
$1000 each for chandeliers that weigh 80lbs- 130lbs.
install (customer owned) Ceilings fan= $150 each
Floodlight= $150 each
replacement of recessed Light bulb=$80-$160 each(depends on the price for bulb)
replacement of bulbs =$25-$75 each (depending on bulb prices and difficulty)
Ceiling fan removal=$125(unless it's too replace with another fixture)
________________________________________________________
Light Switch replacement:
material cost included
toggle/ decora switch= $100-$130 each depending on color/material cost/brand.
combo switch=$115-$130 each depending on color/material cost/brand
3 way switch=$120-$150 each depending on color/material cost/brand
smart switches=$150-$200 each depending on color/material cost/brand
ceiling fan and light dimmer switch (multiple options, included smart switches)=$140-$300 each depending on color/material cost/brand
dimmer light switch( multiple options)=$130-$150 each depending on color/material cost/brand
________________________________________________________
New circuit runs: (material costs are included
New branch circuit line of power up to 50', up to 30A/120V in romex= up to $830.42 (includes normal Circuit Breaker,wire, switch/outlet)
*for normal outlets each depending on length of run/material cost/brand
New branch circuit line of power up to 50', up to 30A/120V in romex that requires a gfci dedicated line= up to $997.39 (includes 1 pole 20A gfci Circuit Breaker,wire, 1 gfci water resistant and
tamper resistant outlet, 1 gang weatherproof junction box and 1 cover plate that allows you to plug things up and nothing gets wet if applicable)
*for normal outlets each depending on length of run/material cost/brand
New branch circuit line of power up to 50' up to 30A/250V in romex= up to $893.53 *each depending on length of run/material cost/brand
New branch circuit line of power up to 50' up to 30A/250V in romex for a dedicated gfci line= up to $1260.08(which includes a 2 pole 30A gfci breaker, wire up to 50', propert outlet/disconnect box, weatherproof junction box and cover for outdoor, only for exterior wall of house, if you need trenching and pipe work, that's separate)
*each depending on length of run/material cost/brand
New branch circuit line of power up to 50' up to 40A/250V in romex=up to $1,322.96 (includes Circuit Breaker,wire, switch/outlet)
*for outlets/switches/fixture this price may vary depending on length of run/material cost/brand
New branch circuit line of power up to 50' up to 40A/250V in romex dedicated gfci line=up to $1521.39 (includes gfci Circuit Breaker,wire, disconnected rated for outdoor use. this price doesn't include any trenching or pipe work, to be placed on exterior wall only)
* this price may vary depending on length of run/material cost/brand
New circuit line of power up to 50', up to 60A/120V in romex=up to $1,355.08 each
(includes a normal circuit breaker, wire, outlet, recessed junction box and cover for indoor use) depending on length of run/material cost/brand
New circuit line of power up to 50', up to 60-70A/250V in flex=$1,800 (includes GFCI Circuit Breaker,wire, switch/outlet)
New circuit line of power up to 50', up to 30A/120V in mc cable = $935.31 (includes AFCI/GFCI Circuit Breaker,wire, switch /outlet)
New circuit line of power up to 50', up to 30A/250V in mc cable=$1,149.34 (includes GFCI Circuit Breaker,wire, switch/outlet)
New circuit line of power up to 50', up to 50A/250V in mc cable=$1,400
(includes GFCI Circuit Breaker,wire, switch/outlet)
New Circuit line of power up to 50' 60A-70A/250V in MC Cable=$1,800
(includes GFCI Circuit Breaker,wire, switch/outlet)
New circuit line of power up to 50', up to 20A/120V in emt= $1246.80 (includes AFCI/GFCI Circuit Breaker,wire, switch/outlet)
New circuit line of power up to 50', up to 40A/120V in emt=$1500 (includes AFCI/GFCI Circuit Breaker,wire, switch/outlet)
New circuit line of power up to 50' up to 60A/250V in emt=$1,481.98 (Material cost is separate)
(Included wire, conduit, 1 GFCI breaker,1 junction box, 1 outlet/switch)
New Circuit line of power up to 50' 40A/250v in PVC=$1500
(Included wire, conduit, 1 GFCI breaker,1 junction box, 1 outlet/switch)
New Circuit line of power up to 50A/250V up to 50' in PVC=$1800
(Included wire, conduit, 1 GFCI breaker,1 junction box, 1 outlet/switch)
New Circuit line of power up to 50', up to 60A/250V in PVC=$2000
(Material cost is separate)
(Included wire, conduit, 1 GFCI breaker,1 junction box, 1 outlet/switch)
New circuit short run line of power up to 15' up to 30A/120V in romex=$500 (includes Circuit Breaker,wire, switch/outlet)
New surface mounted metal electrical box=$100 each
new surface mounted weatherproof electrical box=$100 each
new recessed electrical box=$150 each
New recessed light fixture box=$150 each
________________________________________________________
Outlet replacement: (material costs is separate)
standard/ decora= $155.85/ each
indoor tamper resistant gfci=$200/ each
outdoor weather resistant/tamper resistant gfci with weatherproof cover =$225
smart outlet =$200/ each
combo outlet=$200/ each
Ring doorbell= $200 each
ring security camera=$200 each (install only) running wire to the install refer to wire runs please.
ev charger install starts at $500 below 5' from panel (price goes higher with difficulty and length due to cost of materials
exhaust fan replacement=$225 each
new exhaust fan install=$700
Pipe work(emt/ rigid) per 50' up to 30A= $650/ each
Main Panel upgrade:
100A= $1,350
125A= $2,000
150A= $2,500
200A= $3,500
Sub panel upgrade= $1,350
rewiring per line includes a 1 pole 20A cafi breaker, new run in 12/2 romex up to 500' a surge protection device to protect your entire panel. (this meets the nec 2023 code) making you bring code compliant in Ohio/Kentucky/Indiana.=$1580
if you only want to pass inspection then there's this option.
rewire in 12/2 romex up to 100' with a normal breaker up to 1 pole 20A breaker.= $917.40
Wired cat6 Security camera install=$175/ each camera
wireless security camera install=$75 each
Running cat6 for internet=$200 per room drop
Mudding and painting small holes(2"×2")=$200 each
missing and painting multiple small holes (up to 10 holes, up to 4"×4")=$600
mudding and painting large holes(6"×6")=$350 each
tv mounting in drywall/ plaster=$200
Tv mounting ceramics/ brick/ cement=$400
cable hide in wall(drywall/ plaster) =$150/ each tv
cable hide wall surface=$75/ each tv
extension of coaxial cable=$50/ every 10'-20'.
short circuit wire repair=$228 (for wire repair inside the electrical box only and this is per box).
I am different because my work isn't poorly done, I'm not cheap and you're getting what you pay for, I'm negotiable in pricing and offer payment plans for all projects over $500.
I accept PayPal/ zelle/ Google pay/ cash app/ cash/ checks/ credit cards/ debit cards/ bitcoin
