Pleasant Hill, CA16 Aluminum Tig Welders near you

Where do you need the aluminum tig welder?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Pleasant Hill Aluminum Tig Welders

Browse these aluminum tig welders with great ratings from Thumbtack customers in Pleasant Hill.

Weld Pro
4.6
from 30 reviews
  • 11 years in business
  • 47 hires on Thumbtack
Sirjit S.
Verified review

Welding a car port

Brothers Welding
4.6
from 29 reviews
  • 1 year in business
  • 28 hires on Thumbtack
Kristina K.
Verified review

Jose is awesome, he arrived on time and gave me a thorough estimate, plus a free repair to our lilting railing before he even got approval to start the work. He followed up by phone and text to confirm estimate and timeline. Highly recommend Brothers Welding!

  • 11 years in business
  • 7 hires on Thumbtack
James L.
Verified review

Kirk and his team performed an interior remodel and a new garage build for my house from January 2011 to July 2011. I am satisfied with Kirk’s work. He is very experienced in new constructions and remodels. He did a very good job for a very good price. Kirk also gave me lots of free extras at his expense. In March 2010 I purchased a 2-bedroom, 1-bathroom house in Union City, California. The house was in good structural condition, but as a foreclosured unit, it needed some rehabilitation. The original detached garage was in poor condition; it was badly damaged by termites and water. My intent was to have the detached garage demolished and completely rebuilt from the ground up. I planned on doing interior renovation at a later time. I found Kirk from craigslist and he had a link to his Thumbtack page. I called him and he came by to give me an estimate. He said he could give me a really good deal on a new garage and do an interior remodel for a little more than what I would have paid for the garage alone. Kirk was really enthusiastic about doing my job, much more so than the other contractors I had come to give me a bid. Kirk also had very good ideas about modernizing the interior. He suggested a bar counter between my kitchen and dining area. He would also turn my empty utility rooms into a master bedroom and master bathroom. And he wanted to create a laundry machine closet. Kirk had an architect draw the construction plans; his architect did a really nice job. He submitted it to the city as part of the permit application process. I wanted the work done with all permits so everything would be by the book. It would also help should I decide to sell the house at a later date. Kirk started out on the interior work first. He demolished the old kitchen and utility room. He built a new kitchen, a master bedroom, a master bathroom, a laundry machine closet, and a small coat closet by the front door. Kirk said he could also do a couple more things to the interior. He would do the labor for cheap if I paid for the materials. So I agreed and Kirk also replaced my front door, front window, and sliding glass door. He also remodeled my fireplace and fixed a bunch of broken things in my original bathroom. Kirk also completely rewired the house. The original wiring was a dangerous mess, a potential fire hazard. The interior work was completed towards the end of April 2011 and all the work was approved by the city inspector. It looked really nice. I received many compliments from friends and family. I am fairly picky with details and I did notice a couple flaws with fit and finish. I pointed out them out to Kirk. He and his workers did fix them. The garage work started immediately afterwards. The old garage was not worth saving so it was demolished and hauled away. The original foundation was unusable. So Kirk jackhammered it out. Kirk poured a new heavy-duty foundation onto an extensive frame of rebar. He tied it into the house foundation. Then he framed the new oversized 510 square foot garage. Kirk added a storage attic with a pull-down ladder. Kirk also poured a new driveway that looked excellent. Kirk added a 50 amp subpanel to the garage. He also gave me a bunch of free extras like wall insulation. Kirk also used roof panels coated with an aluminum heat reflective substance. The garage was completed by the end of July 2011. It looked really nice. Like the interior, I also received compliments from friends and family. The above garage attic storage with the pull-down ladder was really useful. The garage also passed city inspection. There were also a few issues with fit and finish in the garage. Kirk fixed the problems that I pointed out. While the garage was being built, Kirk also repaired my patio awning and side perimeter fence. He did an excellent job on them. One lady even drove by, stopped, and complimented on how nice the outside looks. I am overall satisfied with Kirk’s work. He really transformed my house. Since everything was done with permits, I now have a 3-bedroom, 2-bathroom house on county and city records. If you want to see his work on my house, ask Kirk to give you my phone number.

JOE
5.0
from 8 reviews
  • 12 years in business
  • 4 hires on Thumbtack
Stanley S.
Verified review

In need of a welder, I found Joe on Thumbtack. We arranged to meet and I was able to observe some of his work. It was quite good. Joe is an experienced welder. We contracted on a fair price and Joe showed up on time. I am quite satisfied with his work. He also went out of his way, without my asking, to buy extra, expensive 10-awg wire so that his 220-volt welder could reach the furthest point on my property. That went beyond the call of duty. I recommend Joe wholeheartedly because he cared for my project.

  • 5 years in business
  • 11 hires on Thumbtack
Heather C.
Verified review

Matthew helped me with several tasks around the house including a welding project. He did great work and was friendly, reliable, and creative. I would hire him again, and recommend to friends.

FMS Metal Works
5.0
from 4 reviews
  • 6 years in business
  • 3 hires on Thumbtack
Marc C.
Verified review

Matt at FMS Metal Works did a fine job from the start of the process of contacting me regarding the potential job to providing me with the proper paperwork for a job quote. The end product/project was more than satisfactory. Compared to the other bids I received from Thumbtack app he was very professional in promptly returning email/phone calls about the potential job. There were some welding vendors that did not return my inquiries about the possible project and one that wanted to start the job on the spot that day of the job quote without any type of job contract or he was not gonna do it at all. Be careful about vendors that do not want to provide you with a job estimate that both parties can agree on. Overall experience with FMS metal works was good. Will definitely do business again for future welding projects.

Marcos P.
Verified review

My name is Marcos Pareas and I am the owner of a large Bar and Restaurant in Tomales, Marin County, CA on picturesque HWY 1, in Tomales Bay. The bar uses stools exclusively for customer sitting. A number of them broke and my local welding service man will fix them but the welding will hold only 3 to 6 months. Harris fron H. Skillie Mobile Welding Service came in as a customer. I noticed that he did welding a pointed to him that I had a number of stools broken. He gave me a very reasonable bit and I gave him the job to weld them. It has been over a year and they are all holding. I was very satisfied with job done and Harris's work ethic. He will be my welder for all the needs of the William Tell Restaurant and Bar. Marcos

About

I do mig and tig welding on 18 gauge and up. Specialized in auto metals related and aluminum, stainless steel, aluminum, and mild steel. I can go to you or you can come to me.

About

I have several years experience in commercial and structural welding. I also have experience in scenic and custom fabrication.

About

I'm a welder experienced in SMAW, GMAW, FCAW, and GTAW. I also do oxy-acetylene welding and cutting. I'm certified and able to read and follow blueprints.

  • 13 years in business
About

Hi my name is Matt Weber. I've been a rig welder for the past 10 years mainly in the refineries, also work a lot out side the refineries. I run up hill or down hill on piping or structural steel. I weld carbon, lots of different alloys. Arc weld, tig, mig. I'm passionate about my work. I pass x-ray welds almost every day. I have certifications from Chevron refinery. I am meticulous in my work and believe to do it right the first time. I'm looking forword on providing you with clean quality work, also production. Thank you. Matt Weber

  • 1 hire on Thumbtack
About

We offer the following services: *Structural steel fabrication and erecting *Stairs/railing fabrication and erecting *General mobile welding

About

I have been welding for 4 years. I can do most light duty ferrous metals and stainless steel. I work when most people stop working on evenings and weekends. This is my second job.

About

We can do welding, fabrication; pre-fabrication and install of pipe fitting. We have more than 30 years of experience and are professionals in our trade. We hold customer satisfaction as our number one objective.

About

My services include welding, torching, grinding, fitting, JLG operation, and rigging. I do stick and MIG welding. I have been in the industrial construction field for 15 years.

About

We cover stainless steel, glass, aluminum, cable, steel railings, and canopies, as well as all other custom fabrications. We offer structural steel-certified welding, too!

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

How long is welding training?

Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

How many types of welding are there?

Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

  • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
  • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
  • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
  • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
  • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

Where can I take welding classes?

Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

How much is welding training?

The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

Hire skilled professionals for absolutely everything.