San Clemente, CA59 Drafting Professionals near you

Where do you need the Drafting Professional?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

San Clemente Drafting Professionals

Browse these drafting services with great ratings from Thumbtack customers in San Clemente.

Architectural CAD Services
4.9
from 14 reviews
  • 11 years in business
  • 19 hires on Thumbtack
Catherine L.
Verified review

Lukis did a fantastic job for me. I was looking for someone on a freelance basis to do construction documents for a kitchen and other parts of the house. We met in person to discuss the project and to see if we were a good fit. I was very satisified with his work and his rate was reasonable. I would recommend him to anyone looking for a quick and experienced CAD drafter.

ECCO Design Build
4.5
from 4 reviews
  • 16 years in business
Joann U.
Verified review

Elite CAD produced the constuction drawings for our room addition and their work was accurate and complete and done on time. We couldn't be more satisfied.

2D3D.Design
4.7
from 3 reviews
  • 25 years in business
  • 2 hires on Thumbtack
Noreen R.
Verified review

I had a great experience using CAD Drawings by Sam! I needed a unique barn door for my living room and Sam created a drawing from scratch for me to model the door after. The size of the door was much larger than any normal door so I needed a custom drawing that would lay it out perfectly for construction. The purpose of my project was more personal than what most folks probably need an expert drawing for, so it meant a lot that Sam was so passionate about getting it perfect and took my project seriously. He was really easy to work with and very reliable. He was also kind enough to give input on how to hang the door to make sure it was structurally safe. I would always use Sam's services for my future projects and highly recommend CAD Drawings by Sam!

Don S.
Verified review

As a General Contractor I highly recommend Wade Weber and Associates for their ability to quickly design the project and get the remodel plans approved and get the building permit for the construction . As a design architect he was able to draw up the kitchen remodel and submit the plans and get the permit. Sometimes he can get the Permit over the counter the same day by talking to the guys at the city that he sees all the time . His knowledge of drafting , Cad Drawing , City codes and Design are expertly done .We would not hesitate to recommend Wade to anyone wanting a good Architect .

CADDGuru
5.0
from 1 review
  • 32 years in business
Michael J.
Verified review

The project went very smooth and quickly. He sent me an initial drawing and followed up with a phone call and completed the job.

About

We do commercial, residential and retail work. SC CAD - Drafting Services offers the following: * As-built Planning and Design * Construction Documents * Elevations and Details * Marketing/Lease Plans * Area Calculator/Sq. ft. City submittal services are also available.

  • 7 years in business
About

We offer service's the largest engineering companies in the world don't perform themselves. We do this radically faster at a substantial savings while mitigating risk to the engineering company. We can mobilize anywhere worldwide.

About

I'm a Solidworks user, and I'm able to do: * Concept design * Solid modeling * Mechanical design * Drafting * Tech. illustrations * RF test fixtures * Tooling Having a small machine shop allows me to build prototypes, or modify existing or new parts. I also design and build custom parts for cars and motorcycles, that is my passion. If you are interested in learning Solidworks, I can get you up to speed in a very short time.

  • 18 years in business
About

Cause I'm very reasonable, understanding and do what I can to help my clients in every possible way. I also like when my clients are very hands on with what they want so the project comes out exactly how they want it and very happy about it at the end of the day.

About

I offer Autocad drafting service for Electrical/Instrumentation drawings. I do P and IDs, Schematics, Panel Layouts, Loop Diagrams, Assembly Drawings, Enclosures, Location Drawings, Mechanical, Architectural, Structural, 3D, or anything you need, I can design and draw. My name is Jill.

About

I do engineering design prototypes using Solidworks and Inventor. I identify the "form, fit and function" prior to any tooling. Engineering drawings are provided.

About

We provide professional CAD engineering designs and drafting services. We offer mechanical and electrical drawings. We work on consumer and industrial products, architectural, aerospace, and military projects.

About

With my BS degree and over 25 years of architectural experience, it will benefit my clients and employers.

About

My work is based upon work exp from the drawing board to tooling to manufacturing to CAD.

  • 32 years in business
About

I am an architectural technical drafter with a background in computers. My vocational trade began in middle school and I was hooked. I always look for the most efficient way of completing a project even after it has been submitted.

About

I offer computer aided drafting and 3D solid modelling and rendering, using AutoCAD, 3D Studio Max, Revit Architecture and Solidworks.

About

As a kid, I was always drawing everywhere: on the walls, floors, tables, and everywhere. When school began, I took advantage of art classes, and in high school, I was able to take drafting classes, and that is how my career began as a cad-design engineer.

About

I provide CAD design and drafting services. I have over 40 years of mechanical experience in aerospace, underwater and various industries.

About

Our services include: * Concept Development * Research and Development * 3D CAD Designs * Mechanical Engineering * Chemical Engineering * Electrical Engineering * Rapid Prototyping * Prototype Assembly * Product Testing * Consultation Services * Provisional Patent Preparation * Licensing and Promotional Services

About

Thomas E. Caldwell Dear Engineering Professional: In the course of your search activities you may have a requirement for an accomplished senior PCB design layout engineer (Mentor Graphics, DxDesigner, PADS, Cadence, OrCAD and Allegro). My career has covered responsible positions with major companies such as BAE Systems, Kaiser Electronics, Lucent, Siemens, Hughes Aircraft, Lockheed Martin, and Boeing, ECT. I have substantial experience in the Industry of Electronics from the schematic entry to finished layout PCB/PCA products. Review of my resume will demonstrate a record of increasing responsibilities in the development of RF, ECL, analog, high-speed digital, FPGA and BGA fine line architecture and flex layouts. All designs complied with IPCs 2221, 2222, 6011 and 6012. Other responsibilities include design for test (DFT) and design for manufacturing (DFM), in compliance with IPC specs and other regulatory guidelines and standards such as DO-160. The enclosed resume briefly outlines my PCB/PCBA design accomplishments over the past 25 years. I currently live in your area, but I have no geographical restrictions, and salary requirements are open. If it appears that my qualifications meet your current needs in the electronic industry or related fields. I would be happy to further discuss my background with you in greater depth. Thank you for your consideration. Sincerely, Thomas Edward Caldwell

About

Our work is efficient as well as effective, everything we design can be made and is prepared in a way that any manufacture can use them easily.

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

How do architects work?

Architects may work for an architecture or engineering firm, they may work for a government organization, they can work for a construction company, or they may be self-employed (freelance). The U.S. Bureau of Labor Statistics explains that architects spend a large amount of their working time in the home or company office: meeting with clients; creating reports and architectural drawings; and working with other architects and engineers. When not in an office, an architect is often at the construction site either as part of the development of plans or to ensure building progress is following the blueprint.

When a client interacts with an architect, it is typically to have them design drawings for the construction of a house or a building. If you are a client who has hired a large architecture firm, there may be a team of people working on your design. But if you are working with a freelance architect or a smaller firm, one person (or a small group) will take your concept and translate it into an architectural blueprint that a builder can use to construct a house. The plans will lay out everything from the depth of the foundation to the materials to use to the type of metal to be used in the reinforcement. Once the plans have been created and handed off to the builder, the architect may remain on the project — depending on budget — and oversee progress.

How do architects charge for their services?

According to the U.S. Department of Labor, the median salary of an architect in 2016 was $76,930. This range included architects with every type of company as well as self-employed architects. Depending on the architect and whether they’re with a firm or independent, they may charge per hour or by the square foot, or they may charge a percentage of the total budget for a construction project. An hourly rate is typically used for smaller projects such as providing consultation, helping clients hone their concept before the design process begins, or drafting documents and plans. If an architect is working on an hourly basis on a larger project, there will usually be an agreed-upon cap on the number of hours they will work. For larger projects, such as new construction or total overhaul remodels, architects may charge a percentage of the total construction costs. The architect will usually set the percentage you will pay after the total cost of construction has been accounted for. Percentages can range within a firm depending on the extent of the services they’re providing. For example, a lower percentage of the total construction costs may include drafting and minimal consultation and guidance along the way, while a higher percentage could include on-site project management services with every detail attended to. Architects may also charge by the square footage of the project. The rate per square foot can vary depending on the individual’s training, the services they are providing, the complexity of the project, and other factors — such as obtaining permits. The national average cost to hire an architect is between $1,690 and $2,500.

Hire skilled professionals for absolutely everything.