Danbury, CT14 Aluminum Tig Welders near you

Where do you need the aluminum tig welder?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Danbury Aluminum Tig Welders

Browse these aluminum tig welders with great ratings from Thumbtack customers in Danbury.

Lightspeed Welding
4.5
from 35 reviews
  • 4 years in business
  • 43 hires on Thumbtack
Florence B.
Verified review

Matthew gets 5 stars for being all 5 of those things. Within less than a day and a half of posting my project, he sent an estimate, picked up my repair, did the job and delivered it back to my apt in downtown NYC - beautifully welder. It's a wrought iron headboard with 6 thin vertical bars that had broken off from the frame. He did a great job. I highly recommend him. Great website too.

  • 27 hires on Thumbtack
Rhonda H.
Verified review

I brought Cedric a broken wall-mounted reading lamp, thinking it might be fixed by welding. He identified the metal as an alloy that was not weldable, but offered to trying soldering instead. He struck me as highly experienced in all fix-it matters, with a cluttered workshop and every tool imaginable. If he could not repair this lamp, no one could! He went to some trouble to find the right soldering mixture but a few days later I went to pick up the lamp and it was nicely and neatly repaired. Great, friendly service, and very affordable. Highly recommended.

ShineZall, LLC
5.0
from 8 reviews
  • 2 years in business
  • 6 hires on Thumbtack
Lee B.
Verified review

I contacted Shawn @ ShineZall, LLC a few months ago after searching online for a local business that could perform stainless steel welding on an exhaust system for my car. The contact method I initially chose was email, which I received a very prompt response from Shawn stating he would be more than happy to help & he provided me a mobile contact # to contact him directly and speak about the project. This was a custom exhaust that was only being held on w/clamps and had leaking issues. Shawn from ShineZall, LLC stated he had over 10+ years or more of experience with welding and fabrication and asked me specific details regarding the number of welds, types of joints for each section, etc.. to get an idea of the time required to complete the job. He then quickly came up with a quote and we agreed on the price and I brought my car to his local location the very next day. We had agreed on meeting @ 6:00 A.M. and when I arrived Shawn was outside waiting for me, eager to start the job. I felt very comfortable as he was very professional and knowledgeable. He told me he would have the job completed in the afternoon and I left my car in his capable hands. Throughout the day I was receiving picture updates and messages from Shawn of his progress, which was great that he took the time to assure me of his progress and the quality of his work. I then received a call early in the afternoon that the job was done, I was thrilled. I went to pickup the car & Shawn showed me in detail what he had done and the car has never sounded better. The weld quality is the highest I have ever seen completed by hand. Not only were the welds uniform in size & height, they were spaced perfectly so much so you would think a machine had done it, but it was all due to the talented staff @ ShineZall, LLC. Shawn then provided me with a professional invoice and receipt, charging me exactly the price we agreed upon & gave me his business card. I would recommend anyone who needs high quality welding, or any stainless steel welding to contact ShineZall, LLC as the service, quality & overall experience was amazing. The welds are still holding strong and will more than likely outlast the life of the car itself.

Welding Services
5.0
from 8 reviews
  • 8 hires on Thumbtack
Vincent K.
Verified review

Did a fine job of welding a broken cast aluminum table leg. Good communicator.

Rarebreed Mechanical, LLC
5.0
from 2 reviews
  • 9 years in business
  • 3 hires on Thumbtack
Josh M.
Verified review

I needed my railings to my house welded after a tree trunk fell on the railings and broke it .So i figured I'd give thumbtack a try ,so I searched for a welder and Tyrone was one of the first ones to pop up.Great guy ,great service and he was also negotiable. I'd recommend him 10 times out of 10 with a job well done.

Vega Welding
3.5
from 2 reviews
  • 28 years in business
  • 3 hires on Thumbtack
Eufronio M.
Verified review

He communicates well hence we are able to synchronize our schedules very satisfactorily. He is a competent tractor mechanic and welder, and did a great job with the welding of my tractor bucket and garden trailer. Although we were not yet able to start the tractor because of a bad starter, he promised to return to complete his promise.

  • New on Thumbtack
About

We are an all-around handyman, painter and licensed welder. With more than 18 years in construction, we have what it takes to get the job done right.

About

We fabricate and install stairs and ornamental wrought iron railings. We also do brass, stainless and aluminum rails. Our welders are fully insured, licensed and certified by the state of Connecticut S.B.E.

  • New on Thumbtack
About

I am a welder and fabricator. I read and draw blueprints. I mig, tig and stick weld and also clean and polish metal.

  • New on Thumbtack
About

My name is Ismael Martinez. I'm looking for work in welding or handyman field. I have 20 years of experience. I have also worked in Puerto Rico as a supervisor in department of housing.

  • New on Thumbtack
About

I am a welder with a qualification certificate from State of NY Department of Transportation. I am qualified to use SMAW 3G and 4G, Flux Cored Arc, Welding 2g submerge and Arc Welding 1g. I am the owner of an SAW welding machine.

  • New on Thumbtack
About

I am 7018 stick fluxcore welder or Mig welder and fabricator. I have 8 years of experience welding in shipyards.

About

Services we provide: - Welding: tig, mig and arc - Special metals - Design and fabricated products - Automation equipment - Special machines

  • New on Thumbtack
About

1. Machine operator for a signage company; Visual Citi; Oct. 2013 to Dec. 2013 * Currently working as a machine operator of a Zoom machine in a signage company at West Babylon 2. Welder - Mechanic (Technical Bus Body Building Services; Shreedevi Industries; Apr 2004 to Mar 2013 * Most reliable worker in the team; involved in all the works that the team is responsible to handle * Responsible for all the inspections done by site engineers * Completed work on schedule with last-minute changes in design after inspection * Capable of supervising and leading a team of about 25 workers * Involved in purchasing material and knowledge of good materials like aluminum, steel, and iron that has been used for bus body building

Hire skilled professionals for absolutely everything.