Miami Gardens, FL15 Metal Stairs And Railing Installation Professionals near you

Where do you need the metal stairs and railing installation professional?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Miami Gardens Metal Stairs And Railing Installation Professionals

Browse these metal stairs and railings installers with great ratings from Thumbtack customers in Miami Gardens.

  • 15 years in business
  • 70 hires on Thumbtack
Wayne S.
Verified review

Roberto does very good work. He is sometimes hard to get up with but once he says he's coming, he'll be there. He stayed with us for 9 hours yesterday getting our list done. He knows a lot about a lot, as you would expect a handyman to do. Put up 2 ceiling fans; repaired steps and deck spindale; repaired wobbly toilet; hung pictures along high stairs/wall; replaced flappers in 3 toilets. Broken English makes him sometimes hard to understand, but he's very pleasant to be around and repeats himself as needed. Very personable. A U.S. Veteran for which we thank him for is service there. Fees are sometimes set, sometimes he accepts whatever can be paid. Plan to use him over and over, as long as he serves us well.

Top Pro
FLORIDA WELDING
4.9
from 50 reviews
  • 10 years in business
  • 58 hires on Thumbtack
  • Top Pro on Thumbtack
Fredda E.
Verified review

Replaced bathroom towel bar and to holder and secured drapery rod that was falling out of wall. He came on time,did a professional job and cleaned up. Very satisfied.

Chemsol Tech, Inc.
4.7
from 51 reviews
  • 74 hires on Thumbtack
Dr. B.
Verified review

Mr. Smilovits is very professional and easy to work with. He painted two walls and installed a large piece of Art. He clearly believes the old addage " it is best to measure twice and cut once"

T. Small Construction, Inc.
4.7
from 49 reviews
  • 14 years in business
  • 65 hires on Thumbtack
Johann U.
Verified review

The job was to install railings for three step drop. Toney arrived when he said he would, charged me what he quoted me and was very curteous. I would hire again and recommend to others .

Built by Baxter
4.9
from 45 reviews
  • 22 years in business
  • 54 hires on Thumbtack
Robert M.
Verified review

Ken installed railings on the stairs and adjoining hallway. He was fast and efficient with many good ideas to improve the project. I was very pleased with the final outcome. I will certainly call him on my next project.

  • 36 hires on Thumbtack
Matthew H.
Verified review

Dave was a pleasure to work with. He called me, returned calls, was easy to schedule with and showed up on time. He gave me a quote for the work and got all the work done as he planned. I have a spiral staircase where several of the stairs had broken welds. He had all the tools, kept the job site clean by putting down cardboard and cleaned up afterward.

Miami-Dade Assemblers
5.0
from 14 reviews
  • 17 hires on Thumbtack
Rich U.
Verified review

Yes.. this guy did an awesome job! We needed a heavy-duty metal cage created to protect out Air Conditioning Unit from theft. He came out to do his measurements & then came back with this awesome cage. Looks great...and works great - no more thefts :) We will call them again on our next project.

Richard's Mobile Welding LLC
5.0
from 12 reviews
  • 16 hires on Thumbtack
Katherine S.
Verified review

I was looking for someone to create a pair of stair handrails for our front porch to help my elderly mother get in and out of the house safely. The rails needed to be aesthetically pleasing as well as functional, matching our existing antique courtyard gates. Richard drew up plans, then he and Mike created gorgeous steel handrails that look like they were always there. Perfect! Hire this company! Best experience ever!

MD Hardwood Flooring
4.5
from 13 reviews
  • 19 years in business
  • 13 hires on Thumbtack
Patricia T.
Verified review

MIKE IS THE REAL DEAL! IF YOU WANT THE JOB DONE RIGHT ONCE! MD Hardwood Flooring is the only company we will ever use! The quality of his work goes unmatched. This company is professional, courteous and our floors are beautiful in all our homes. After seeing his work, my Mother who is handicapped wanted the same. Mike suggested floors with no saddle, this sounded interesting and It would be easier and safer for her to get around. WOW, wood floors installed this has given her peace of mind (NOT TO MENTION ME) along with the beautiful floors. This led to my cousin replacing all flooring. The inlay on the stairway is absolutely beautiful. "Next house" They come in do the work, clean up and leave an exceptional job behind. Thank you MD Hardwood.

  • 9 years in business
Hildegarde L.
Verified review

this company has done a variety of work at our luxury condominium building ie. Painted doors on service hallways of 29 floors, 125 apartments in total, have repaired water damage to childrens room from Flooding (damage Restoration), have done electrical jobs at various areas, custom built kitchen cabinet in party room, installed metal doors, etc. All jobs have come in below budget, lowest bid, and have been done fast, no waste of time working here. if you want something done fast for a good price, I highly recommend this company.

  • 10 years in business
  • 12 hires on Thumbtack
Caroline A.
Verified review

My stairs look amazing, all my guests compliment them. Finished just in time for our anniversary party, great work . Thank you very much.

A-1 Repairs & Installations
5.0
from 2 reviews
  • 2 hires on Thumbtack
Jacques G.
Verified review

When many were interested only in replacing our two buildings railing, Jeffrey gave me a quote to repair, stabilize and straighten our 400 feet of railing. When he saw that more posts were to be fixed, he showed me what had to be done. Estimate changed but all was on the level. Honest, hard worker, on time and very careful not to damage our 40 years old concrete slab. Railing as good as new. Very good technique, top line material. For old aluminium railings, he's the solution. All here are impressed.

  • 14 years in business
  • 10 hires on Thumbtack
Ray B.
Verified review

Ken did a wonderful.. He completely rebuilt our staircase about 6 months ago.. Highly recommended!!!!!!!!!!!

George's Handy Work
5.0
from 1 review
    Agneta S.
    Verified review

    George is a very unusual handiman and man-of-many-talents. He SHOWS UP! And he is on time! And he will do what you ask him, and if you are not satisfied - he will redo and correct until you are. He is also creative and has very good ideas for home decorating - a great sense of color and design. George has removed popcorn ceilings, painted, built patios, installed ceiling lighting, installed chair railings, painted garage floors and driveways, built docks - not only for us, but for many friends and neighbors. Always willing to help - going beyond the jobs themselves - and positive, a good listener, and a very hard worker. George does not pretend to be an expert at everything, but he is intelligent and willing to learn what it takes to do jobs he has never done before. It would be very hard, if not impossible, to find anyone with a better attitude and work ethic. He completed all jobs within the time frame he had calculated, and no job is ever done until customers are satisfied.

    About

    Specializing in metal, aluminum, and glass +metal railings, pool fences, dividers. Certified general contractors for over 10 years. Insured and Bonded.

    Q & A

    Answers to commonly asked questions from the experts on Thumbtack.

    How many types of welding are there?

    Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

    • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
    • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
    • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
    • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
    • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

    How long is welding training?

    Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

    Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

    Where can I take welding classes?

    Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

    How much is welding training?

    The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

    Hire skilled professionals for absolutely everything.