Morton, IL9 Furnace Repair Professionals near you

Where do you need the furnace repair professional?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Morton Furnace Repair Professionals

Browse these furnace repair companies with great ratings from Thumbtack customers in Morton.

Morris Heating and AC
4.9
from 14 reviews
  • 18 hires on Thumbtack
Angie H.
Verified review

Morris Heating and AC came out and replaced our furnace for a great price and great service. I would recommend them to anyone needing furnace repair.

  • 4 years in business
  • 16 hires on Thumbtack
Toni J.
Verified review

My washing machine was not switching cycles. Luis immediately responded to my post for help. His quote was very fair. He followed up with me a day later to confirm the appointment time, and then he showed up on time. He was prepared to cover his shoes to enter my home. He was absolutely knowledgeable and explained the problem and the solution. He gave me two options for repair. The washer works perfectly and if I could give ten stars I would. If you have an opportunity to hire this company, definitely do it!

  • 10 years in business
  • 6 hires on Thumbtack
John C.
Verified review

josh was great trouble shooting my furnace ordered the part needed fixed in no time and the prices are very good josh also came to my house the same day moved schedule around to fit me in i will use five star service & supply co. again they do great work.

  • 4 years in business
  • 2 hires on Thumbtack
Je T.
Verified review

CHRIS DID A GREAT JOB! Furnace was blowing cold air so I called Chris. He came prepared with parts for what could possibly be wrong and had my furnace repaired in no time! The price was reasonable too! Can't recommend him enough.

  • 1 year in business
Caleb B.
Verified review

Tim Leach has helped me out on multiple occasions. His company is professional, quick, reasonably priced. They've replaced furnaces for me and my church. We always get treated good with Leach and Company.

Appliance Guys
1.0
from 1 review
    About

    Factory trained over 20 years Repairing Major Appliance ...EPA certified illinois state registered contractor...One year warranty on labor..

    • 9 years in business
    About

    Mainly I think my services stands out because when I come to a customers house They know that I care about them and the quality of the work that I do, my goal is to leave your house better then when I arrived to their house.

    The Just N Connection

    New To Thumbtack

      About

      We are an HVAC and home repair and maintenance company specializing in interior and exterior upkeep of your home!

      Miller's Repair

      New To Thumbtack

        About

        I have thirty-five years of experience in heating and cooling. I have worked for large corporations and worked on all types of heating and cooling systems. I take pride in my work and do the job right.

        Q & A

        Answers to commonly asked questions from the experts on Thumbtack.

        Who fixes furnaces?

        If your furnace needs to be repaired, you’ll want to find a qualified heating, ventilating and air conditioning (HVAC) repair technician. Each state has its own licensing requirements; some require all HVAC technicians to have an HVAC license, while others only require someone operating an HVAC service and installation company with employees to hold a contractor’s license. For example, in Alabama, the Alabama Board of Heating Air Conditioning, and Refrigeration Contractors regulates licensing, while in Kansas there is no state regulatory body and HVAC licensing can vary by region. For simple furnace repairs like changing out a filter, a trusted handyman can probably handle the job, but a trained professional should be hired for tasks like replacing a gas valve, installing a new inducer fan motor or other critical furnace repair jobs that involve dealing with gas leaks or other dangerous conditions. For more, check out our tips for smart hiring on Thumbtack.

        How much will it cost me to replace my furnace?

        The national average for furnace replacement is between $1,800 and $2,500. The cost can range dramatically higher depending on the model of furnace you select, any repair work you require, your location and the cost of installation. Furnace installation costs can be more than the furnace itself due to the cost of doing business and the expertise needed to install the HVAC equipment. Installing a new furnace generally requires technical know-how and the proper tools and licensing. It’s best to hire a pro and budget for furnace installation rather than risk potentially unsafe DIY installation. This will ensure your home’s safety. Check to see if your HVAC contractor has the proper licensing to do the job. If you need duct repair or replacement, expect to pay more for your furnace installation costs. The price for duct repair could be an hourly rate ranging on average anywhere from $85 to $150 per hour, with additional costs for parts.

        How much does it cost to replace a gas furnace?

        The cost to replace your gas furnace will vary based on the type and size of furnace you select, labor and installation costs, and any repairs your HVAC system may need. Nationally, average HVAC prices for a heating specialist range between $1,800 and $2,500. It’s important to select the right size gas furnace for your heating needs. A furnace that’s too small won’t heat your house properly, while a furnace that’s too large will run inefficiently, cycling on and off and likely breaking down sooner. HVAC specialists calculate your exact heat needs by measuring your home and incorporating variables such as the regional climate and your home’s level of insulation. Retail pricing for gas furnaces can range from $650 up to $3,000 and more. The higher the AFUE (annual fuel utilization efficiency) rating of the furnace, the more efficient it is at turning fuel into heat and the lower your carbon footprint and utility bill will be. HVAC installation costs are often based on an hourly rate and can range from under $50 to over $100 per hour, depending on the company and the furnace being installed. Higher-end furnaces cost more to install because they require added labor and expertise. For a typical installation, it might take two HVAC installation pros one day or less to remove your old furnace and replace it with a new one.

        How much does it cost to have your furnace cleaned?

        To keep your furnace in good working order it’s important to have it regularly cleaned. The national average furnace cleaning cost ranges from $60 to $80, though prices can vary greatly based on where you live in the country and what your furnace maintenance includes. An HVAC company may have different rates for different levels of furnace maintenance. For example,one company may offer general furnace maintenance for $79 and advanced maintenance for $138. Another company may offer a 38-point maintenance check for $89 and a 64-point maintenance check for $178. According to Energy.gov, a standard furnace cleaning and maintenance visit can include:

        • Checking the vent connection pipe and chimney
        • Checking the physical integrity of the heat exchanger
        • Adjusting the controls to provide optimum air temperatures
        • Checking the combustion chamber for cracks
        • Testing for carbon monoxide (CO)
        • Adjusting the blower control and supply-air temperature
        • Cleaning and oiling the blower
        • Removing soot and corrosion from the furnace
        • Checking the fuel input and flame characteristics
        • Sealing the connections between the furnace and the main ducts

        How much will it cost me to replace my air conditioner?

        If your AC system is in need of replacement, the national average air conditioner installation costs range from $2,930 to $3,670. Costs can vary greatly depending on whether you are replacing a wall or window unit or a central air system. A central air system is connected to ductwork that runs throughout your house and pumps cooled air into your various rooms via vents and registers. A central air conditioning system is far more costly than wall or window units. Selecting a central AC system that has a high seasonal energy-efficiency ratio (SEER) will likely lower both your carbon footprint and your utility bill. The type of AC system you select, where you live in the country, and the regional costs of HVAC work, duct removal and replacement, and ductwork repairs that are needed are some of the main factors that affect the cost of new air conditioner installation. Here are some examples of average costs for installing forced-air systems.

        • Install Lennox 16 SEER single-stage AC unit: $5,743
          • Removing and disposing of the old furnace, moving and reconnecting the water heater, and installing a 3.5-ton gas furnace. The job took 18 hours of labor.
        • Installation of a new 14 SEER single-range cooling system: $4,000-$6,000
        • Installation of a new 16 SEER two-range cooling system: $6,000-$8,000
        • Installation of a new 20 SEER variable capacity cooling system: $8,000-$12,000
        Hire skilled professionals for absolutely everything.