Thumbtack Logo

Charlotte, NC 15 Welders near you

Where do you need the welder?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Charlotte Welders

Browse these welders with great ratings from Thumbtack customers in Charlotte, NC.

  • 11 years in business
  • 94 hires on Thumbtack
  • Response time: 2 hours

Adam B.

Verified review

Mr. Jones delivers solidly in every respect. 1. Expertise. He's knowledgeable about his craft. He identified the problems with my mower, corrected them, and performed the additional routine maintenance I requested. Yesterday, I operated my mower for the first time after Mr. Jones repaired it, and, yes, it's a cliche to state that "it runs like it was new"---but the fact is, it did. 2. TImeliness. The time from when Mr. Jones picked up my machine until the time he returned it to me was five days. I defy any franchised mower-repair business to routinely have a faster turn-around time than that. 3. Cost. The repair charges, plus the fee for picking up and delivery, were incredibly economical. 4. Professional ethic. Impeccable. My wife gave me a chuckle after Mr. Jones came to my house in his personal vehicle, picked up my lawn mower, and departed. She said, "You realise that you just gave our lawn mower to a man you never met before, who then put it in his own car and drove away with it." The fact of the matter was that was never a concern. Mr. Jones kept me informed constantly throughout his work, advising me of when he would arrive, what he found wrong with the machine, what he did to fix it, what the charges would be, and when he would bring it back---and completely delivered in everything he said. He is professional and trustworthy. 5. Personable. Now, if a service provider is top-notch in the first four areas above, then how nice a guy he is really doesn't matter. But Mr. Jones is also pleasant and cordial. I'm not a fellow who readily takes to people, but it was, personally, a pleasure to meet him. To anyone who needs repair of his lawn mower, or anything else that falls under Mr. Jones's repair skills, I recommend him most strongly.

Mike T.

Verified review

Bruce was very responsive and made the appointment to come to my house within 24 hours of me reaching out. He quickly made the repair and charged a much more competitive price than what I was quoted by someone else. Will definitely contact Bruce again when repairs/service is needed and will absolutely recommend him.

Jamie D.

Verified review

Great and honest repair man. Not to mention fast! Called and he came out the same day. Highly recommend him.

TOP PRO
  • 84 hires on Thumbtack
  • Charlotte, NC

Scott D.

Verified review

Chris did a wonderful job welding the front and rear deck frame of my aluminum jon boat. I pretty much asked him to pull off a miracle and weld a gap between the frame and the weld only to be delighted with the outcome of his service. Great job and great service..Would not hesitate to hire him again for any future projects.

David C.

Verified review

Chris did some custom welding and cutting of galvanized steel pipe for me. I submitted my Thumbtack request on Friday afternoon and Chris had completed the job by Saturday morning. He arrived on time and went straight to work. He is professional and polite. I highly recommend.

Teresa D.

Verified review

Chris did a great job. We will call him for future welding needs. Thanks Chris!

  • 4 years in business
  • 14 hires on Thumbtack
  • Response time: 1 hours

Jill S.

Verified review

When we couldn’t find front porch railings we liked at the big box stores, we turned to Thumbtack. We had a really clear vision of what we wanted. Something simple and classic, easy to clean and a wide top to put things on while juggling for keys. Of all of the estimates we got, Jorge and his father were the only ones to talk about perspective and what would look best from a distance and close up. We talked about how they would be welded together and attached. They noticed a potential problem with the alignment because of the way our porch was built but quickly came up with a couple of possible solutions. They had the materials and finished we wanted. No one else came up with the whole package for the right price. They are truly artists who take pride in their work. I highly recommend them!

Faith W.

Verified review

Thank you again J&P Metal Arts! We installed 3 handrails in front of our commercial property and they look great. Professional staff, kept property orderly while installing and we valued your feedback during the project. Your suggestions were great and the handrails look amazing, thank you again!

Susan D.

Verified review

They were helpful and thorough. They were able to find a way to solve my unusual problem. I will recommend them to anyone I know needing metalwork.

  • 8 hires on Thumbtack
  • Rock Hill, SC

Letisha L.

Verified review

Marcus done an outstanding job on My project. I had a dishwasher sink, that was to long. Marcus had to cut it in 2 different places, plus the legs of it & replace 1 piece for the sink to fit my diswasher. Marcus traveled to Charlotte NC, from SC & was very professional. I highly recommend Marcus for all your welding needs.

Renaldo H.

Verified review

Marcus welded a custom metal security barrier for my door at my place of business. I haven't had any sign of intruders every since and feel safe that it will not be any more.

Bruce E.

Verified review

Marcus did a fantastic job on a bike frame. Aluminum is NOT an easy weld. He got it just right.

  • 7 hires on Thumbtack
  • Clover, SC

Philip G.

Verified review

I can't say enough good things about the job that Rick did for me. I have an antique umbrella stand that I use for my collection of canes. The metal bottom was in bad shape and kept falling out. I was hoping that Rick could weld it together, but he came up with an even better solution. He made a metal support that goes under the bottom, is completely hidden, and provides great support for the canes. He made the support in a couple of days and mailed it to me before he even asked to be paid. He then charged me a very small amount. See pictures.

Anthony L.

Verified review

Rick responded immediately to my request and was able to schedule a time same day to assist with the my project. I met Rick and I had something in mind and after brainstorming we came up with an idea that actually made the trailer more user friendly in the future!!! Would recommend to anyone needing metal or welding work!!

John M.

Verified review

Stainless table looks great - nice finish. Rick is also so honest, he got the materials at a lower price so he charged me less than the quote.

  • 3 hires on Thumbtack
  • Rock Hill, SC

Jim F.

Verified review

Renaldo put together a large metal basket to fit into a pig cooker - the item was very well constructed, heavy-duty and I am sure will work great. He was easy to work with and got my project finished quickly. Thank you

Darryl B.

Verified review

Smoke Stacker on Grill and cut hole for stacker to go through roof. Weld my fryers on GrillZilla! Good job...

Donna C.

Verified review

Great experience this guy really knows his stuff

  • 3 years in business
  • 2 hires on Thumbtack
  • Smyrna, SC

Brandon H.

Verified review

I threw a rather tricky taskat him and gave him all the information that I could given it being a vision in my head. He took it and knocked it out of the park. Awesome guy with a great creative eye. Will definitely be going back for more work in the future

Kevin L.

Verified review

I would recommend Cowboy's Custom Welding to anyone needing metal fabrication or repair to machinery or equipment. Tim is experienced and does the job right for a fair price. Kevin Lloyd Architect, Charlotte, NC

About

We provide fabrication, repair, etc. on a variety types of metals. We are specializing in MIG, TIG, and arc welding.

  • Charlotte, NC

About

My name is Hector Etcheverry, and I have over 24 years' experience when it comes to welding. I am specializing in TIG and MIG. I would like to help you in anything you may need. Please feel free to contact me anytime regarding what project or work you would like to have done. I will make sure to get back to you that same day. Great quality shouldn't have to cost an arm and a leg! Hector

About

I have been welding for 22 years. I have built bridges across creeks, truck bed accessories and bumpers. I have built gates and hung them as well as built production line expansions, structural welding and steel bins. I can design, build, and weld to your needs. I take great pride in my work and always do high-quality work.

About

I make air conditioning cover and repair tank handrail. I weld carbon steel, pipe, stainless steel, and aluminum. I have been welding for 29 years. I weld metal parts using Tig, Mig, and Stick.

  • Statesville, NC

About

I do the best that I can to please my customers. I don't send anything back wrong. I always do it right the first time.

About

I can repair, install, do maintenance, troubleshoot or rebuild just about anything from homes, autos, boats and motorcycles. I also do heating and air conditioning and electrical services.

About

I do custom projects, repair, and installation. There is not a job that is too big or too small. I charge affordable prices. I offer free estimate. I speak Spanish and English.

About

We offer any type of metal fabrication and welding of all types of metal. We believe that a quality weld with very nice visual appearance makes any project. Whether it be your push mower or your 8000 KW gas turbine, we make it look top-notch. One of our top-notch welders will be honored to help you with your project.

  • 3 years in business
  • Cherryville, NC

About

We specialize in weld repairs on anything, from farm machinery to lawn mowers and anything in between. We also do custom fabrication and welding jobs, like build wood stoves and water boilers. The only job too small is the one you never call us about!

  • 1 hire on Thumbtack
  • Huntersville, NC

About

I am a college student at the University of North Carolina at Charlotte for civil engineering/construction Managment. I can do anything, from small repairs , automotive work, and even custom items. I also enjoy doing art work as well. I have a shop where I do all of my work located on exit 25 off of 77

About

I fabricate, weld and make repairs on structural metals, farm equipment and gates. No job is too small. We provide mobile services.

About

I have a lot of experience in welding. Everything from mig, tig, stick. I am a certified welder. I am moble. I can work from home or come to your. Take a lot of pride in my work and make shore the customer is happy with the job.

About

J&C specializes in custom metal fabrication, welding, and repair in Charlotte, NC

About

PM Fabrication is a multifunctional metal working shop. We specialize in parts and service for German-made foam rubber processing equipment. Many items are in-stock. Call for more information!

Cost calculator

Find out the average cost for projects similar to yours

{[{ pricing.estimation }]}

{[{ pricing.estimationDescription }]}

Something went wrong. Give it another try.

Try again

Actual Requests

See other requests for welders in Charlotte

“Need Welding Services on April 28, 2013”

Charlotte, NC

Project type
Welding
Project location
Indoor
Metal type
Brass
Start a similar project

“Need a Welder”

Matthews, NC

Welding type
TIG
Project type
General welding / metalwork
Indoors or outdoors?
Outdoors
Details
I have know idea about the first question. I have a gate that was welded and the top part of the gate where it is welded to the round pen broke. Would have to come see what it is that I need.
Start a similar project
Hire skilled professionals for absolutely everything