Tell us what you need so we can bring you the right pros.
Receive quotes from pros who meet your needs.
Compare quotes, message pros, and hire when ready.
Browse these welders with great ratings from Thumbtack customers in Las Vegas.
WELDERS 1st CHOICE and TERRY will be my first choice for any welding work I or my friends may need. I had two custom gates made by Artistic Iron Works that took over 3 months to make and 3 visits to my home and after 3 different measurements a letter to the BBB. Visit by the Nevada State Board of Contractor’s Investigator Gary Copenhaver who said this work was acceptable, look at the pictures, what do you think I’m filing a complaint on them. I’m going to court now against Artistic Iron Works. I am now happy with my gates thanks to Terry and his company WELDERS 1st CHOICE. TERRY IS A HONEST MAN OF INTEGRITY AND TAKES PRIDE IN HIS WORK, AND CRAFTSMANSHIP. In 5 hours on site Terry refrabricated my gates in the blistering heat . Terry and his crew of two, cut down 6 inserts for holding glass cleaned up the welds and repainted. Cut new striker holes for deadbolts so I could remove the ugly plate that covered poorly drilled holes. Cut down post on west gate so height matched the wall and welded caps back on. East gate removed fence panel, and post. Removed all iron from house and wall. Repaired hole in stucco and block wall. Removed black silicone from wall cement. Repainted stucco and wall to match house and wall. Cut off 4 hole plates from wall section of fence. Installed appropriate 2 hole plates. Cleaned up welds and repainted and reinstalled level to wall. Cut off hinge side post from fence section, and moved it forward 5 inches. Cut plate and rewelded post level, and resecured plate in new location. Cut off one hole plate, 1” sleeve and 1 1/4 extension, between hinge post and fence. Installed more appropriate 1 1/2 material between hinge post and gate. Welded in screw hole and cleaned up affected area from old post location. Removed screws, silicone, and spacers from old post location. Removed screws and spacers from old location of posts and replaced with more appropriate 1 1/2 piece of material between hinge post and bottom of fence to match bottom rail of fence to strengthen post. Also, for a cleaner look , rehung gate. Cut down striker post , and welded to plate at proper height to match the decorative design of the gate, and concrete. Cut off tab at the bottom of striker post, as it was unnecessary, and added another plate to the top so the post was level. Moved post forward approximately 5” to match gate. Resecured plate flat to the ground. Resecured top tab with screw. Cut new striker hole for lock. Terry also repainted all areas he worked on including my brick stucco wall. He did not use any silicone to fill in bad craftsmanship. He used welds and good measurements and if corrections were needed he did the work over again. I wish I would have found WELDERS 1st CHOICE first would have same me time and frustration. You know when you find a good guy when other Welders know his work and recommend him. THANKS TERRY FOR FIXING MY HORRIBLE CUSTOM GATES. TERRY AND HIS CREW MADE IT RIGHT.
Stan and his partner did a fantastic job welding a custom bar table - very professional, knowledgeable and skilled. They provided great ideas to ensure our final product withstood the test of time. Couldn't have asked for a better contractor! Highly recommend for any welding job!
Excellent job repairing our garden gate. Replaced a broken aluminum piece (see photo) by welding new piece to gate.
We had 2 drive through gates and a screen door fabricated and installed by Metal Pro some time ago and could not have been any happier with the results. They came out even better than expected! Kevin is absolutely meticulous about every detail, from initial design to final install. And what a pleasure to work with - great attitude, great sense of humor- a real professional in every way. And you can't beat his prices. We would not hesitate to hire him again and would highly recommend Metal Pro for all your metal fabrication projects, large or small. Dan and Marilyn Finnegan
Mr Munnerlyn arrived at the time he gave me, and was finished close to the time frame he advised it would take to build and weld my Barbeque Grill. Jon was very professional and his work area was clean when he left. I used my grill this past weekend and it was worth every penny. My grill time has been cut down to half the normal time do to the size of the grill.
I hired Max to weld some custom stainless steel brackets for bookshelves, and some custom candlesticks in a patina finish. Both projects were on time and exactly what we agreed on. I recommend Max for any metalwork.
Lots of experience in welding field, fitting, currently certified combo piping welding.
The owner greeted me as I arrived and asked all the right questions. He stated that he would finish the job in about two and a half hours. We left our boat and had a leisurely breakfast and toured Boulder City. When we returned we were very pleased with the results. Damian toured us through his shop and chatted with us about his Company. You could tell that this man knew his profession and the quality of his work was outstanding. Two huge things to take away...his price estimate was less than half of all other competitors, and he was able to perform the job the next day from when I called. I would have been waiting for five days to 3 1/2 weeks for others. What a guy!!!!! This is the place to take your welding needs to.
He built me my stainless steal display shelves and salon from a old 1920's building to brand new retro decor was absolutely beautiful and just the way I had amagined.
He is honest and has a great attention to detail. He secured other parts of the piece I had fixed. He looked at the project as a professional and fixed a few things I wouldn't have noticed.
We provide custom fabrication and design services for one-of-kind metal projects as well as mass production of commercial, industrial and consumer products. We work with all types of metals, aluminum, stainless, hot-cold rolled steel, iron, brass, copper, etc. We have been in Las Vegas for over 18 years.
I'm a jack of many trades. I do mechanical and any kind of handyman work. I paint and do welding as well.
I have been a welder for over 17 years. I am certified and can weld anything or fabricate anything. I own my own fabrication shop in Boulder City. I also have a service truck that is fully stocked with tools and a welder! I can come to you, or you can come to me. You won't be disappointed.
It's about working together to get what you need or want
We show pride and top workmanship . Always putting are customer first . Taking the time to hear there needs but directing them in the right direction.
I am personable and engaging. That shows through my work. My clients are always happy with their final products because I can easily understand and see their vision. I care about what I do and it shows in my work. It's always good quality complete work.
We offer ornamental iron welding, tile repairs, painting, drywall, A.C pool repairs, spa plaster, stone BBQ and coping.
Description: Heavy Metal was established in 2000 to provide custom fabrication and repair services to the Las Vegas area. Heavy Metal is locally owned and operated, providing high-quality welding services by a certified welder with over 30 years of experience in all types of welding. All types of welding services are available at Heavy Metal. Regardless of the type of repair or custom fabrication you need, we are able to assess your welding needs, provide quotes and perform the services required. Call today! Slogan: We are a local business dedicated to serving you, our customer. Our highly skilled and professional team is here to offer you a comprehensive treatment service with the best services possible. We guarantee this high level of service at all times, so you can rest assured that you are in safe hands when you choose us for your next project. Products include metal, steel, aluminum, iron, and piping. All major brands are serviced. Services are as follows: * Welding and Fabrication Services * Heavy-Equipment Repair * Plant Maintenance * Pipe Line Services * Conveyor Systems * Container Repairs * Handrail Welding * Structural Steel Welding * Steel Erection * TIG Welding * MIG Steel * Electrode Welding * Orbital Welding * Flux-Cored Arc Welding * Silver Brazing * Soldering * Plasma Cutting * Conventional Machining * Mobile Welding Services * Manufacturing * Estimates * Consultations Specialties include stainless steel, aluminum, copper, tubular frames, plate weldments, stick welding, tubes, pipes, high-tensile steel, and titanium. The business was established in 2000. Hours are as follows: * Monday: 08:00 a.m. to 04:30 p.m. * Tuesday: 08:00 a.m. to 04:30 p.m. * Wednesday: 08:00 a.m. to 04:30 p.m. * Thursday: 08:00 a.m. to 04:30 p.m. * Friday: 08:00 a.m. to 04:30 p.m.
I weld any metal from A to Z and revamp your work space to be nice, neat and free from clutters. Thank you for your interest. Please don't hesitate to contact me to discuss further details.
I do welding. I also work on cars or anything that has to do with my hands or putting things together like construction.