Tell us what you need so we can bring you the right pros.
Receive quotes from pros who meet your needs.
Compare quotes, message pros, and hire when ready.
Browse these aluminum welders with great ratings from Thumbtack customers in Allen.
I'm restoring a 1956 Ford C600 - - a BIG truck - - and needed someone who could operate a MIG welder to repair 59 years worth of cracks and rusted-out areas on the truck's cab and fenders. Chad recommended one of his welders named Yoshi. Yoshi arrived on time, worked efficiently and diligently. The cracks are repaired and the rust holes filled. I'll be using Yoshi again to repair damaged areas of the truck's doors and hood. Great job!
One of the best pros anyone would ever have the chance to work With. His welding skills far exceed other welders I’ve worked with in the past. He came to me and stayed to even teach us welding, helped me fix my truck door and was one of the most polite and stand up men you’ll ever meet. Everything he does is professional and I would highly recommend him to Anyone. Not only that but his prices are fair especially for the work quality he puts in ifmanything he should charge more great work value!
JB Treece did welding for me on a 1950 era grain drill....all cast iron. I had previously been told cast iron was near impossible to weld and that very few people actually do it. Clearly my informants never met JB. He did a great job. Looks as good as new and works perfectly. I couldn't be more pleased.
By far one of the best welders i found,the job was done fast, on time and very clean. Desi was very professional and knowledgeable. the best thing was that his prices are great compared to other contractor. I will definitely recommend and use D&M welding.
If your looking for a professional welder and metal fabricator, look no further. I couldnt be happier with the outcome of our job from Goldermann Welding. These guys have a wealth of knowledge in the industry and were very professional from start to end. They worked hard from dawn and into the evening until the job was done. Thanks!
Winston is a very careful and proficient welder. He took care to evaluate the work and make recommendations for me to approve before he began working. He cut a piece of steel that matched my rail that needed welding, clamped the new piece securely to the old, and welded thoroughly above, below and to the sides, resulting in a very solid repair. Then he burnished all welding to produce smooth surfaces. His highly professional work matched his estimate in time and in price, which is rare. I highly recommend Winston for any welding you need, and you can call me if you have further questions. David Johnson 972-897-6061
~ Automotive bolt would not budge ~ Following several emails to describe the job and a text to confirm day and time, the Welder, Adam Chirdo, arrived at the mutually agreed time. He was well groomed, courteous, polite, and his truck was well equipped with state-of-the-art welding gear. The job was to remove a stubborn and stripped out torx-head bolt from an automotive engine block. He assessed the job, accepted my suggestions, and proceeded to construct a special "lever " system using 3/8" steel rod. The rod was welded on the bolt-head, and using a "cheater" bar, the bolt was loosened and removed from the engine block. Prior to Adam's involvement, I had tried to remove this stripped Torx head bolt using several techniques, but was unable to do so. This was an occasion for a skilled welder. I would certainly recommend this young man to anyone who needs an arc, or acetylene torch, welder. He demonstrated both types of welding skills to my satisfaction. Thanks, Adam, for a job well done! John Q. Adams Professor of Biology Fort Worth, Texas
Adams, Is very very good at what he does as a welder. Thank you for the great work, comparable price and overall follow up. Highly recommended.
Tony did a great job for us. He installed ceramic tile in our kitchen and laundry room and it looks fantastic! I appreciated his quick initial response to my request for quote, his affordable cost and his continued communication throughout the installation.
job done quickly and quality work. aluminum welding is not a common skill and they hit the mark. will use in the future.
I've known Jake for almost ten years and he is a top notch welder but foremost a superior craftsman. 10 star rating from me!⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️
Aluminum boat had cracks in bottom due to accident. David brought the boat back to life welding all cracks shut. He came to my home twice and we put the boat in the water behind my house until all cracks were found and welded water tight....a tough job done professionally and well.
Pete is a great guy and fantastic welder. Without being asked, he added reinforcement plates to his weld and blended it into the assembly with a coat of paint. Affordable and fast. Will recommend and use again - JL Kitz
Mr. Summer is a very good person and friend. He offers alit of good advise.
We are a radiator repair and service company. We work on personal automotive and large industrial machinery. We specialize in aluminum welding. There is no job that is too big or too small for us. Give us a call to see what we can do for you.
Welding - I love doing it. I make metal art and I paint. I try to bring an artistic eye to improve any situation. I service gates and access control systems. I have serviced gates and accessed control systems for over 5 years.
I am a welder, and I have 18 years of experience in mig, tig, flux core, and hard surface. I know how I use all tools that I need for welding.
Here at Big Boys, we emphasize pride in our work and satisfaction to our customers. Welding is what we do, and we do it well. You will also find that we're more reasonable than the most.
I am an 18-year-old welder. I passed 2G, 4G, 6G bend test. Stick, MIG, TIG, gas and brazing courses are completed at Green River High School. I recently moved back to Texas, and I am seeking work.
I am a certified welder looking to pick up side jobs until I can start my own business. If it contains metal, there's a good chance I can weld it together. I have my own welder and can travel to you in order to get the job done.
I'm a certified TIG and MIG welder. I can also read blueprints. I am a fit up and layout fabricator. I can weld stainless steel and aluminum.