We're updating our Terms of Use. Learn more. Close

North Dallas Wrought Iron Doors

North Dallas Wrought Iron Doors

Frisco, TX

Gold profile

Let us do the work

  1. 1

    Answer a few questions about your needs.

  2. 2

    Get competing quotes from pros within 24 hours.

  3. 3

    Compare and hire at a price right for you.

Request Free Quotes

About North Dallas Wrought Iron Doors

hired 54 times on Thumbtack

North Dallas Wrought Iron Doors
We can also help you with any of your welding repairs in steel, Aluminun, cast iron, cast aluminum, stainless steel.

We are a family-owned business. All of our products are made in America by our company; no third-party is involved.

We offer the following to our customers:
Welding, General welding/metal work, Structural, Industrial,
Automotive, Artistic/Sculpture
Metal Fabrication, Welding, Bending, Cutting, Assembling, Auto, Home, Industrial, Steel, Stainless Steel, Aluminum, Iron
Metal work, Welding, Fabrication, Plasma cutting, Aluminum, Wrought Iron, Stainless Steel, Galvanized Steel.
- Custom, wrought-iron doors for builders and home remodeling and wine cellar gates
- Custom trailers and trailer repairs

You may drop your project off at our shop, or we can come to you and take care of your repair needs, big or small, no problem.

We also offer a wide range of wall decors and yard art, along with decorative wrought-iron plant holders. We have been in business for 16 years, and we have excellent products. All our products are built to order. We will ship anywhere in the United States.

Location

7774 Fm 423
Frisco, TX 75034

  • Twitter verified
  • Address verified

Reviews

Back to Top
  • 5/5 stars Welding Verified Review

  • 5/5 stars Metalwork Verified Review

    Bruce with North Dallas Wrought Iron Door did an outstanding job with the Winch installation. He was prompt ,courteous, and charged a fair price. I was completely satisfied with his work.
    I would recommend his shop to my friends.

  • 5/5 stars Welding Verified Review

    I had a 1972 Grumman 14 ft aluminum canoe that had two cracked ribs, a large debt in the bottom, and a cracked gunwell. I searched thumbtack for some TIG welders nearby and Bruce's shop came up. Bruce fixed everything I asked for and even nade sure the ribs were stronger than they were to begin with! The company name may be NTX Wrought Iron Doors, but they can do so much more than just wrought iron doors. Now I can get back on the water again. Thanks, Bruce!

  • 5/5 stars Welding Verified Review

    Great job. Done on time.

  • 5/5 stars

    Excellent work, good communication, timely installation and wonderful finished product... iron trellis around entry to front door for growing a jasmine vine.

  • 5/5 stars Welding Verified Review

    Fast response to my request. Need my wake tower repaired on my boat. Bruce was able to get me in next day for a amazing price to get it welded and repaired. He is a contact I plan to hang on to! Will be using him again for other projects

  • 5/5 stars Welding Verified Review

    So nice and very friendly .!!!

  • 5/5 stars Welding Verified Review

    Great service and communication, and we'll be using y'all again for more work on our doors!

  • 2/5 stars Welding Verified Review

    We made arrangements for him to pick up a small garden chair that needed welding. He had a big job on the date and said he would come by at end of day. Job was extended and I never heard from him again

  • 5/5 stars Welding Verified Review

    Bruce and Co. took on a special restoration project for me involving a ornamental brass flamingo that was broken off at the legs. He figured out how to not only repair the brake at the legs but also shifted the legs forward somewhat so that the body of the bird could be brazed to the ornamental bass beneath the bird as well. All-in-all, very well done and now the ornament is stronger than original. I would highly recommend N. Dallas Wrought Iron Doors for any metal work project you might have.

  • 5/5 stars Welding Verified Review

  • 5/5 stars Welding Verified Review

    Great work restoring an old cast iron kettle that had been in the family for 4 generations. Made repairs and restorations beyond what I expected. Nice folks, as well.

  • 4/5 stars Welding Verified Review

    Nice person, hard worker and would use again.

  • 5/5 stars Welding Verified Review

    Absolutely the best, outstanding service!!

  • 5/5 stars Welding Verified Review

    Repaired an antique water can that was made of a difficult metal. Very nice people to work with, fast service and a great price. Much appreciated.

  • 5/5 stars Welding Verified Review

    I had a unique project that required a welding and restoration specialist. Bruce did a very good job with a difficult repair.

  • 5/5 stars Welding Verified Review

    I needed to get my business equipment fixed. Bruce fixed it the same day I dropped it off and it works even better than before.

  • 5/5 stars Metalwork Verified Review

    Compared to Bruce's other projects, my work paled in comparison. My project was a simple repair of the legs for a dining room chair. Bruce treated my job as though it was one of his major projects. To my amazement the job of color matching of the finished work was spot on with the original finish..

    I will not hesitate to contact Bruce for any welding needs I may have in the future.

  • 5/5 stars Welding Verified Review

  • 5/5 stars

    Bruce did more than outstanding work on my project. I commissioned him for something a little more outside his specialty. He put together my beer brewing stand to the EXACT specifications I wanted and then some. I couldn't have asked for a better product. Thanks Bruce!

  • 4/5 stars Welding Verified Review

    Waiting for unit to be welded. Bruce knows what he's doing.

  • 5/5 stars Welding Verified Review

    work surprised me ... better repair than i hoped for

  • 5/5 stars Welding Verified Review

    Outstanding service and terrific work. I actually requested quotes from other welders before finding Bruce and was giving a price I thought was too high for the work I needed done. I even had a couple welders tell me they did not want the work. Within 15 minutes if requesting a quote on Thumbtack, Bruce gave me a call with a great price. Took the material to the shop and Bruce said it was no problem, would be about 48 hours. Got a call 2 hours later saying it was done. Not only did the pieces look great, Bruce painted them and added finishing touches. Even attempted to charge me less but I had no problem paying more because it was quality work. I highly recommend Bruce for any welding or fabrication needs.

  • 5/5 stars Metalwork Verified Review

    Bruce did the work quickly, and it looks great.

  • 5/5 stars Welding Verified Review

    On time, friendly service, and good work product (welding gates and refinishing metal front door). I'd use them again in a heartbeat.

  • 5/5 stars Metal Fabrication Verified Review

    Was looking to get my transmission crossmember modified and they were the first response. After talking with Bruce I was confident he would do the job I wanted. I got excellent service at a fair price. The crossmember looks great. Will do business with them again.

  • 1/5 stars

    We ordered 16 doors. After drawing half of the full order amount we did not get a single finished door. Bruce stated he wanted more money or we could pick our stuff up. We took a very large loss on this job due to Bruce's inability and unwillingness to complete the job in the agreed timeframe and for the agreed to amount. I would never do business with him again.

    Bruce R. from North Dallas Wrought Iron Doors replied to this review on September 11, 2014:

    After talking to Alfi S. for two years prior to this order that was made a year and a half ago I submitted a proposal to him at that time he was told that the start date Would need be started In Jan. and no later than Feb. I was in contact with him on several occasions towards the end of Feb. March. We were finally given the go ahead to start the job and received a check from Alfi S. on March 3, 2013. He did get two doors installed and 32 doors were built and ready to be hung to the jamb. The 9 eyebrow top doors that were to be done was changed to a ellipse which should have been an extra cost. Do to the late start, changes from the original agreement and the fact that we Took a hit of our own money in the amount of $9000.00 and could not agree on the extra cost on the material and labor Alfi had his contractor come and pick up all the doors and material to complete the job. I also made the offer to sale the doors for him to help regain some of the cost and never herd back from him until now with this post. As you can see from our reviews we have some very satisfied customers. I do no that had we started the job In Jan. and no later than Feb. we would have made the dead line. In closing I will say this to you Alfi the offer is still there to sale the doors for you all you need to do is contact me.
    Bruce................

  • 5/5 stars Welding Verified Review

    I was so very pleased with the work they did! I would recommend them to everyone. They were able to refinish my current iron door and make it look better than it did when it was new! They welded my iron stair railing and secured it, refinished my fireplace screen too! AND they cleaned up after themselves! So very pleased!

  • 5/5 stars Welding Verified Review

    Bruce performed the requested repair. His turn around was quick and he is accommodating. The end result exceeded my expectations. I will use this company again in the future and highly recommend them.

  • 5/5 stars Welding Verified Review

    Bruce and his shop did an outstanding job welding a roll bar and floor pan patch panel into my 1967 mustang. I would recommend North Dallas Wrought Iron Doors to anyone needing similar welding work done on their car.

  • 5/5 stars Welding Verified Review

    Bruce came up with innovative idea to fix my pool diving board problem. I sheered off two of the deck bolts when removing the old diving board base. Bruce Built a bracket to hold the new diving board to the concrete deck.and it fits invisibly under the diving board stand.

  • 5/5 stars Welding Verified Review

    I originally asked Bruce to weld a new coupler on my 4x8 Tractor Supply Co trailer and after asking me what was my intent of the trailer, he recommended a solution to carry my two kayaks and still maintained storage room. Great quality work at a reasonable price that matched the finishing of the trailer. Couldn't have done it better myself!

  • 5/5 stars Metalwork Verified Review

    Bruce was great to work with! He did an excellent job. We were so happy that we are planning on hiring him for a new project immediately.

  • 5/5 stars Metalwork Verified Review

    On very short notice, Bruce built some custom mounts. Excellent craftsmanship and very easy to work with. I couldn't be happier. I highly recommend North Dallas Wrought Iron Doors.

  • 5/5 stars

    Not only was his service reasonably priced, he perform the service the next day and did a wonderful job! Would recommend him to anyone interested in wrought iron products and/or welding services! He also provided me with sources for two other jobs I needed done!

  • 5/5 stars Welding Verified Review

    Bruce helped me out with a frame repair on a motorcycle. He did a fantastic job and went the extra mile to make sure it would last. I'll be going to him for all my weldind needs!

  • 4/5 stars Metalwork Verified Review

    " Bruce was very helpful. He tried several things to fix the problem and although we couldn't get it resolved, he gave it a good effort. He was very professional and I would definitely recommend him. I found Thumbtack by accident by using Google. It was easy to use!"

Question and answer

Q. Describe the most common types of jobs you do for your clients.

A. Wrought Iron doors,Metal fences, Wrought iron yard art & wall art.Metal fence repairs,trailier repairs, smokers and grills. We are mobil or you may come to us. Welding repairs of all types, Wine cellar gates, Entry gates, lawn furniture welding repairs,

Q. Why does your work stand out from others who do what you do?

A. All our products are American made by our company no third party,all products are made to order. We are a family owned business and have been in business for 17 yrs. with steel and Wrought Iron work

Q. What do you like most about your job?

A. Looking back at the beauty of the product after it is complete and the satisfied look on the customers face

Get started »
Let us introduce you to pros.