Grand Prairie, TX
28 Mig And Tig Welders near you
Where do you need the mig and tig welder?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Grand Prairie Mig And Tig Welders

Browse these mig and tig welders with great ratings from Thumbtack customers in Grand Prairie.

  • 19 years in business
  • 121 hires on Thumbtack
Keith S.
Verified review

Outstanding service and terrific work. I actually requested quotes from other welders before finding Bruce and was giving a price I thought was too high for the work I needed done. I even had a couple welders tell me they did not want the work. Within 15 minutes if requesting a quote on Thumbtack, Bruce gave me a call with a great price. Took the material to the shop and Bruce said it was no problem, would be about 48 hours. Got a call 2 hours later saying it was done. Not only did the pieces look great, Bruce painted them and added finishing touches. Even attempted to charge me less but I had no problem paying more because it was quality work. I highly recommend Bruce for any welding or fabrication needs.

  • 10 years in business
  • 93 hires on Thumbtack
Steve F.
Verified review

I'm restoring a 1956 Ford C600 - - a BIG truck - - and needed someone who could operate a MIG welder to repair 59 years worth of cracks and rusted-out areas on the truck's cab and fenders. Chad recommended one of his welders named Yoshi. Yoshi arrived on time, worked efficiently and diligently. The cracks are repaired and the rust holes filled. I'll be using Yoshi again to repair damaged areas of the truck's doors and hood. Great job!

Top Pro
  • 19 years in business
  • 36 hires on Thumbtack
  • Top pro on Thumbtack
Rick G.
Verified review

Matt did a fantastic job repairing an irreplaceable grille bracket for my Sunbeam Alpine grille with his MIG welder. He did it while I waited and the charge was very reasonable. I would not hesitate to use Matt again for any of repair or replacement needs. Besides, he's a great guy to talk to!

Top Pro
  • 17 years in business
  • 22 hires on Thumbtack
  • Top pro on Thumbtack
Javier A.
Verified review

By far one of the best welders i found,the job was done fast, on time and very clean. Desi was very professional and knowledgeable. the best thing was that his prices are great compared to other contractor. I will definitely recommend and use D&M welding.

Bar Z Welding and Repair
4.9
from 22 reviews
  • 3 years in business
  • 28 hires on Thumbtack
Kim L.
Verified review

JB Treece did welding for me on a 1950 era grain drill....all cast iron. I had previously been told cast iron was near impossible to weld and that very few people actually do it. Clearly my informants never met JB. He did a great job. Looks as good as new and works perfectly. I couldn't be more pleased.

Goldermann Welding
5.0
from 15 reviews
  • 5 years in business
  • 20 hires on Thumbtack
Jonathan H.
Verified review

Goldermann welding repaired a stainless steel sink for me and I recommend them to anybody who has any metal repairs. They were really professional and would do anything to get the job done.

Top Pro
  • 13 hires on Thumbtack
  • Top pro on Thumbtack
Autumn A.
Verified review

We hired Dillon to do a 20x40 add on to a 24x40 existing structure...and he did an awesome job. His price was more than fair, he worked really hard...and the finished job looks great. We are hiring him to come back and do a metal awning for us next. He was on time, kept communication open always and was very professional. A really nice guy. His helper was very courteous too. We would definitely highly recommend him. Good job Williams Welding!

JR Metal Fabrications
5.0
from 7 reviews
  • 11 hires on Thumbtack
Duresameen S.
Verified review

My mother-in-law had very specific barstools that were practically custom to her kitchen. She didn't want to get rid of them but they were in bad shape from general wear and tear over the years. I had happened to come across Jesse's information when reaching out for welders or any type of professional that was willing to tackle this project. Jesse came across as a sincere, friendly and hardworking professional. He emailed me to ask me some questions about the project and I sent him some pictures of the barstools. He didn't oversell his abilities or make wild claims about how he could or would transform these chairs. Based on the pictures, he made realistic assessments as to how the barstools could be salvaged and how much he would have to change the aesthetics of the barstools while still retaining their original charm. It was very important to my mother-in-law that these barstools not sway too far from their original look as they matched her kitchen very well. She was however, looking for strong reinforcements throughout the structure of the barstools, including the foot holders, shaped like rings, that were made from wood and had major cracks in them or had fallen off completely over the years. She wanted them reinforced with metal mainly or any element that could withhold weight so she wouldn't be left with broken foot stools in the future. She had also wasted a lot of money over the years hiring pros to repair or replace the wood and this time, she was looking for a more permanent fix. I had spoken with a few other welders or similarly skilled pros but some of them were quoting me crazy prices right out the gate while one other didn't even have the courtesy to ever return my texts or voicemails after our initial conversation. It was for the better because I doubt any of them could have transformed the barstools the way Jesse did and he was open to but realistic with my budget! The attention to detail on those chairs is stellar. My mother in law loves her barstools and received many compliments on the work Jesse did to restore them. He even went the extra mile to paint the reinforcements a rich color to enhance the beauty of the chairs, which was not an easy feat. There's no doubt that Jesse takes great pride in his work. He underpromised but definitely over-delivered! I'd like to add that I hired him for this project early last year and just got around to writing him a very well-deserved review. The fact that I felt compelled to submit a review for him after so much time has passed since he completed the work is in itself a testament to the quality of workmanship Jesse brings to the table. He truly transformed those chairs without sacrificing their original charm and beauty! My mother-in-law still thanks me for having found Jesse and saving her barstools!

FireSparrow Welding, LLC
5.0
from 5 reviews
  • 1 year in business
  • 4 hires on Thumbtack
Geoffrey R.
Verified review

Adams, Is very very good at what he does as a welder. Thank you for the great work, comparable price and overall follow up. Highly recommended.

  • New on Thumbtack
Timipat W.
Verified review

I'm the manager of a self storage company. Our gate track had been so damaged that it would no longer close. You can imagine the security risk. I called Bennett after reading reviews on his site. Of course, I called two other welder's for estimates as well. Bennett called just a few short minutes after I left a voice mail. He showed up to the job site within two hours of my call. I then showed him what needed to be done. He gave me an assessment & his estimate. I agreed & he got right to work . It was completed within an hour. The job was superbly done. This man knows his craft! I won't be searching the web for another welder in my future, I have Bennett's business card and that's all I need. You can't go wrong if you call Bennett! As for the other two companies; one called me hours later and the other didn't call me at all... Thank you Bennett. I haven't had to worry about that gate jumping its track since. You have my business for life!

Bell's Welding
5.0
from 2 reviews
  • 23 years in business
  • 3 hires on Thumbtack
Dwain C.
Verified review

Had a leak in one of my pontoons of my boat. Had my boat with another welder for three days that guy made it worse. Mr. Bell was Very Proffessional. Mr. Bell knows his stuff. He corrected other guy screw up. Bell pressurize pontoon for anymore leaks. I was able to hit the lake that afternoon caught ten big blues. I will use Bell's welding again if need be.

Jake Debus
5.0
from 2 reviews
  • 4 hires on Thumbtack
Cody P.
Verified review

I've known Jake for almost ten years and he is a top notch welder but foremost a superior craftsman. 10 star rating from me!⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️

Pete's Welding
5.0
from 1 review
  • 20 years in business
  • 1 hire on Thumbtack
Jim K.
Verified review

Pete is a great guy and fantastic welder. Without being asked, he added reinforcement plates to his weld and blended it into the assembly with a coat of paint. Affordable and fast. Will recommend and use again - JL Kitz

Mr. Summers (The Welder)
4.0
from 1 review
  • 2 years in business
  • New on Thumbtack
Steve M.
Verified review

Mr. Summer is a very good person and friend. He offers alit of good advise.

  • New on Thumbtack
About

I am an 18-year-old welder. I passed 2G, 4G, 6G bend test. Stick, MIG, TIG, gas and brazing courses are completed at Green River High School. I recently moved back to Texas, and I am seeking work.

  • New on Thumbtack
About

I'm a certified TIG and MIG welder. I can also read blueprints. I am a fit up and layout fabricator. I can weld stainless steel and aluminum.

  • New on Thumbtack
About

Welding - I love doing it. I make metal art and I paint. I try to bring an artistic eye to improve any situation. I service gates and access control systems. I have serviced gates and accessed control systems for over 5 years.

  • New on Thumbtack
About

I am a certified welder looking to pick up side jobs until I can start my own business. If it contains metal, there's a good chance I can weld it together. I have my own welder and can travel to you in order to get the job done.

  • New on Thumbtack
About

Here at Big Boys, we emphasize pride in our work and satisfaction to our customers. Welding is what we do, and we do it well. You will also find that we're more reasonable than the most.

  • New on Thumbtack
About

I am a welder, and I have 18 years of experience in mig, tig, flux core, and hard surface. I know how I use all tools that I need for welding.

  • New on Thumbtack
About

I do advanced wheel throwing, dinnerware and artful pieces. I'm also an experienced welder incorporating metal into ceramic pieces. I'm also looking for welding jobs locally. I'm also experienced in working with wood. I'm an all-around creator of functional, useful and artful items. I create sculptural pieces with most material. I'm also experienced in welding and using oxyacetylene cutter. I also do manual labor services, and I can be a helper and handyman.

Hire skilled professionals for absolutely everything.