San Francisco, CA8 Custom Powder Coating Services near you

Where do you need the custom powder coating service?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

San Francisco Custom Powder Coating Services

Browse these custom powder coating services with great ratings from Thumbtack customers in San Francisco.

Gomes Handyman
4.9
from 299 reviews
  • 15 years in business
  • 376 hires on Thumbtack
Linda F.
Verified review

If you're looking for a skilled and resourceful handyman who is punctual, responsible, and value for your money, David Gomes is your man. I initially hired David to repair two pocket doors - one was stuck and the other did not slide smoothly. I was a little nervous that he had to remove the moulding to repair the doors, but he did a great job. I, also, had him adjust some of my cabinet doors and he worked on my patio doors and screens so they now open so smoothly. David is, indeed, a specialist on doors, but he can do so much more that I had him do other things in my house. . .install 3 new toilets and a new lock and deadbolt on a door, re-grouted some tiles, replace spray hose, moulding in powder room etc. Whenever he finishes a task, he always asks you to check it so that you are completely satisfy with the job. He made several trips to the hardware store to get materials he needed and didn't charge me for his time. I have a large custom home and have used many contractors/handymen for various jobs and I would highly recommend David. I am so glad I found him on Thumbtrack. . .he will be the only handyman I will use from this day forward.

Top Pro
  • 5 years in business
  • 80 hires on Thumbtack
  • Top Pro on Thumbtack
Laura W.
Verified review

Pros: Jasper was prompt in responding, punctual, friendly, and completed the work quickly. I was impressed that he finished this project in one day; whereas other contractors seemed to indicate it was more work and more difficult. I would hire him again. Some areas he can improve: There were a couple of minor areas that were knicked on our kitchen island that I didn't notice until cleaning up. Also, I think he could have done a little better cleaning up the island- wiping down the cabinet fronts that had a light layer of dust (I did this myself). Finally, I gave him a box of stain & top coat that the previous owners left to us. He applied them but I noticed they didn't leave the counter shiny, like the finish we had before he sanded. After Jasper left, my husband realized we were missing the water sealant coat which we had in the garage. So now we are applying this coat ourselves to make the island water- proof and give it the same shine. This isn't totally Jasper's fault since I gave him the supplies but I would have liked if he would have noted that something seemed to be missing or off (or given his recommendations on what he would have stained/sealed it with to make sure the wood stayed water proof.) Overall, I'm happy with the work.

  • 27 hires on Thumbtack
Brandon S.
Verified review

We moved into a house from the 70's that needed a ton of work and we needed a quick turnaround. Not only did Carlos and his team make it happen, they went above and beyond to make sure that we were happy with every detail. They removed the nasty, dingy popcorn ceilings and applied a semi smooth texture. They Painted all of the ceilings including the ceiling beams. They Patched holes, retextured walls, installed new door knobs and painted the entire house. They Installed and painted baseboards and painted the fireplace. Our goal was to get everything done before Christmas and they made it happen. I can't believe the transformation! It looks like we live in a new house. There's no trace of the nasty popcorn ceilings and overall the house looks fresh and finished. Carlos continually checked in and was honest with his pricing. Very happy with the final results.

  • 11 years in business
  • 7 hires on Thumbtack
Kirk P.
Verified review

We had Outstanding construction do a full interior remodel (Kitchens/Bathrooms) including landscaping front/rear. Concrete patio and side walkway of my Moms home in Belmont. House was in need of major upgrades throughout. Entire interior was re-textured / crown moulding / kitchen demo/replace including appliances. Because KC has his own dump truck is very convenient for haul out of debris as well as pickup of landscape and other materials for the job as the job progresses. KC did have good suggestions and has the contacts to get good pricing on quality products such as Brick/cabinetry/foam accents/windows etc. Kirk and his team work very hard are conscientious and keep a tidy jobsite. He will work with any of your own subcontractors but will also provide contact details for folks he has worked with in the past. Pricing was fair after the whole job was done although it did take longer and cost more than originally estimated but from what I hear this is normal for larger re-model projects because there are so many moving parts. He had the plans drawn up and went to the city to obtain the permits...so no problems with any of the intermediate city inspections and achieved permit sign off . Our realtor who was checking in periodically on the projects progress was very impressed with the end result as was his colleagues who came to see the finished product. As testament to how well the finished product was received, when we put it on the market it sold in 7 days with multiple offers over asking. Granted alot of that had to do with the location but it also had a lot to do with the "Pop" the house had after the remodel was completed... people that looked at it were very impressed with the finished product.

Dark Metal Machine Works
5.0
from 12 reviews
  • 6 years in business
  • 20 hires on Thumbtack
Gail K.
Verified review

Having never used Thumbtack before, we reviewed the 4 bids that were received and decided to go with Dark Metal Machine Works. Even though more expensive than the other bids, the process that he described and was going to utilize to change the color of our iron table (stripping and then powder coating) was obviously so much more extensive and professional than the other bids received. We couldn't have been more pleased! Joe Servin the owner was incredibly responsive to my many queries, did an outstanding job of "redoing" a 30 year old art deco table that now looks fabulous and was timely and within budget. He is a true professional. When it became obvious that we were in good hands, we asked him if he could create a second smaller table for us that would match the same design. The second table is great and its hard to believe that they weren't created as a pair so many years ago. All of this completed within three weeks! We recommend Joe and Dark Metal Machine Works strongly and couldn't have asked for a better person to complete our job!

Bernard's Blacksmithing
5.0
from 1 review
    Christian H.
    Verified review

    Bernard did an amazing job at turning our very detailed drawings for a set of kitchen shelf brackets into exactly what we specified. The set of 2 brackets has arms for 2 shelves, holding significant weight, so it was vital that they be done correctly. Not only did Bernard do an excellent job (and in the timeframe he'd promised), he also provided us with information as to where to get the brackets powder coated. I would not hesitate to use Bernard again....in fact, I am now regularly keeping an eye out for house projects that could benefit from his expertise. Oh, and he's super friendly too!

    About

    We do powder coating services. Our slogan is "You name it. We do powder coating." It means that we will provide powder coating on every thing that is metal, aluminum, etc. Our customers love our prompt services. We do everything in one day around. We have a good quality, and also, our prices are affordable and negotiable. Come, and visit us. We give the best attention.

    About

    We are an owner-operated powder coating service that has been serving Solano County and other Northern California communities since 1989. Our trained powder coating technicians use the latest in equipment and techniques, ensuring the highest quality possible for your refinishing job. Classic refinishing is your #1 choice, whether you're a manufacturer who is needing batch finishing or a residential customer with only one piece of patio furniture in need of repair. Call us today! Our services are as follows: powder coating, metal finishing, plating, industrial powder coating, patio furniture refinishing, welding and structural repairs, tempered glass or acrylic tabletop replacements, rush services, deliveries, and custom shop.

    Q & A

    Answers to commonly asked questions from the experts on Thumbtack.

    How long is welding training?

    Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

    Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

    How many types of welding are there?

    Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

    • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
    • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
    • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
    • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
    • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

    Where can I take welding classes?

    Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

    How much is welding training?

    The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

    Hire skilled professionals for absolutely everything.