Visalia, CA10 Furnace Repair Professionals near you

Where do you need the furnace repair professional?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Visalia Furnace Repair Professionals

Browse these furnace repair companies with great ratings from Thumbtack customers in Visalia.

30 Hands Repair
5.0
from 28 reviews
  • 2 years in business
  • 52 hires on Thumbtack
Sabrina A.
Verified review

Kevin and Audra were kick to respond to my request on-line for a sprinkler repair. Kevin was prompt and efficient. Courteous and professional. Definitely will hire again!

Temp Pro
4.8
from 11 reviews
  • 2 years in business
  • 17 hires on Thumbtack
Diana P.
Verified review

Eric showed up when he said he would. He was very professional and honest about the repair made. I hate heat after about an hour. He even had to get on the slippery roof!

wesco A/C & Heating
5.0
from 5 reviews
  • 14 years in business
Tanya L.
Verified review

Wesco AC technician was great. Prompt arrival, Fixed my air conditioner and changed my thermostat in a timely fashion. Thanks to them I didn't have to sit too long in 113 degree heat when my system needed repair.

  • 5 hires on Thumbtack
Susan A.
Verified review

The technician came out the same day to replace a part on our furnace. He was courteous and explained everything he was doing. He made sure I understood what was needed and that I agreed. I would not hesitate to hire them again.

About

We do residential, multi-unit, and commercial building repair and maintenance. We also do heating and air conditioning service, appliance installation and repair, cosmetic repair along with plumbing and electrical repair, and welding and light fabrication service.

About

We pride ourselves on providing fast and affordable airconditioning and furnace repair, service and installation. We have over 10 years of HVAC repair experience in this area and we are fully licensed and insured. Provide a detailed description of the problem you are having and get an accurate quote with no hidden fees.

About

I have integrity and deal with customers honestly.

  • 5 years in business
About

Ray is a certified N.A.T.E technician. N.A.T.E technicians are know by their quality work and professional manner.

About

I offer home repairs and remodels. I have 13 years of experience, give free estimates, provided guaranteed work, served over 15,000 customers and am a licensed contractor.

About

I repair and replace residential furnace, A/C and duct. I also do design-build. I currently live in Fresno, California area and work in the Bay Area, California. I have 20 years of experience, and I can travel to your area. I'm clean, courteous and professional.

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

Who fixes furnaces?

If your furnace needs to be repaired, you’ll want to find a qualified heating, ventilating and air conditioning (HVAC) repair technician. Each state has its own licensing requirements; some require all HVAC technicians to have an HVAC license, while others only require someone operating an HVAC service and installation company with employees to hold a contractor’s license. For example, in Alabama, the Alabama Board of Heating Air Conditioning, and Refrigeration Contractors regulates licensing, while in Kansas there is no state regulatory body and HVAC licensing can vary by region. For simple furnace repairs like changing out a filter, a trusted handyman can probably handle the job, but a trained professional should be hired for tasks like replacing a gas valve, installing a new inducer fan motor or other critical furnace repair jobs that involve dealing with gas leaks or other dangerous conditions. For more, check out our tips for smart hiring on Thumbtack.

How much does it cost to have your furnace serviced?

When your furnace isn’t regularly serviced it can operate less efficiently. This increases your energy bills and also prevents your furnace from keeping your home as warm as you like. Keep your furnace properly maintained with regular service. The national average furnace service cost is between $60 and $80. Companies may offer tuneup specials that cover all the necessary testing, tightening, measuring and cleaning to keep your equipment running at top efficiency. If you have a newer system, furnace service costs may be covered by your warranty. Outside of warranty, a basic tuneup might start at $58 and a more advanced maintenance cleaning could be over $120. Here are some signs your furnace may need service:

  • The furnace has stopped functioning entirely.
  • The temperature cannot be regulated.
  • Rooms in the home are either too hot or too cold.
  • The heated air coming from the furnace smells like gas.
  • The thermostat isn’t working.
  • Strange noises are coming from the furnace.

How much will it cost me to replace my air conditioner?

If your AC system is in need of replacement, the national average air conditioner installation costs range from $2,930 to $3,670. Costs can vary greatly depending on whether you are replacing a wall or window unit or a central air system. A central air system is connected to ductwork that runs throughout your house and pumps cooled air into your various rooms via vents and registers. A central air conditioning system is far more costly than wall or window units. Selecting a central AC system that has a high seasonal energy-efficiency ratio (SEER) will likely lower both your carbon footprint and your utility bill. The type of AC system you select, where you live in the country, and the regional costs of HVAC work, duct removal and replacement, and ductwork repairs that are needed are some of the main factors that affect the cost of new air conditioner installation. Here are some examples of average costs for installing forced-air systems.

  • Install Lennox 16 SEER single-stage AC unit: $5,743
    • Removing and disposing of the old furnace, moving and reconnecting the water heater, and installing a 3.5-ton gas furnace. The job took 18 hours of labor.
  • Installation of a new 14 SEER single-range cooling system: $4,000-$6,000
  • Installation of a new 16 SEER two-range cooling system: $6,000-$8,000
  • Installation of a new 20 SEER variable capacity cooling system: $8,000-$12,000

How much will it cost me to replace my furnace?

The national average for furnace replacement is between $1,800 and $2,500. The cost can range dramatically higher depending on the model of furnace you select, any repair work you require, your location and the cost of installation. Furnace installation costs can be more than the furnace itself due to the cost of doing business and the expertise needed to install the HVAC equipment. Installing a new furnace generally requires technical know-how and the proper tools and licensing. It’s best to hire a pro and budget for furnace installation rather than risk potentially unsafe DIY installation. This will ensure your home’s safety. Check to see if your HVAC contractor has the proper licensing to do the job. If you need duct repair or replacement, expect to pay more for your furnace installation costs. The price for duct repair could be an hourly rate ranging on average anywhere from $85 to $150 per hour, with additional costs for parts.

How much does it cost to have your furnace cleaned?

To keep your furnace in good working order it’s important to have it regularly cleaned. The national average furnace cleaning cost ranges from $60 to $80, though prices can vary greatly based on where you live in the country and what your furnace maintenance includes. An HVAC company may have different rates for different levels of furnace maintenance. For example,one company may offer general furnace maintenance for $79 and advanced maintenance for $138. Another company may offer a 38-point maintenance check for $89 and a 64-point maintenance check for $178. According to Energy.gov, a standard furnace cleaning and maintenance visit can include:

  • Checking the vent connection pipe and chimney
  • Checking the physical integrity of the heat exchanger
  • Adjusting the controls to provide optimum air temperatures
  • Checking the combustion chamber for cracks
  • Testing for carbon monoxide (CO)
  • Adjusting the blower control and supply-air temperature
  • Cleaning and oiling the blower
  • Removing soot and corrosion from the furnace
  • Checking the fuel input and flame characteristics
  • Sealing the connections between the furnace and the main ducts
Hire skilled professionals for absolutely everything.