Hartford, CT44 Welders near you

Where do you need the welder?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Hartford Welders

Browse these welders with great ratings from Thumbtack customers in Hartford.

  • 8 years in business
  • 41 hires on Thumbtack
Luis C.
Verified review

Welding a mazda rx7 racing beat intake. Good job Bob's Restoration and Repair Service

  • 28 hires on Thumbtack
Tim D.
Verified review

Cedric was great. I needed a rush repair because I broke a welded bracket off my Craftsman mower deck. He met with me that morning and welded the bracket back to the deck the same day. It was a pleasure to meet with Cedric and have him fix my mower. I would recommend him to anyone.

ShineZall, LLC
5.0
from 8 reviews
  • 2 years in business
  • 6 hires on Thumbtack
Mike G.
Verified review

Very easy to work with. Came over on short notice, arrived when promised, and performed quality TIG welding for a fair and reasonable price. Highly recommended

  • 9 hires on Thumbtack
Jennifer F.
Verified review

The job was done with quality and craftsmanship. I could tell he took pride in his work. I would definitely use Man of Steel Welding again.

Vega Welding
3.5
from 2 reviews
  • 28 years in business
  • 3 hires on Thumbtack
Eufronio M.
Verified review

He communicates well hence we are able to synchronize our schedules very satisfactorily. He is a competent tractor mechanic and welder, and did a great job with the welding of my tractor bucket and garden trailer. Although we were not yet able to start the tractor because of a bad starter, he promised to return to complete his promise.

  • 7 years in business
  • 2 hires on Thumbtack
About

I enjoy went my customers are satisfided went they see the quality of the job done.

Retrofit
3.0
from 2 reviews
  • 14 years in business
  • 4 hires on Thumbtack
Chris P.
Verified review

I believe he did a good job but he welded a plow frame on truck and we will not be able to tell if weld will hold until we use plow in a snow storm!!

About

Kilborns Welding is owner -owned and operated. We do residential and commercial and all types of welding. We give free estimates, so call Kilborns Welding today. We've been serving Massachusetts since 2005. We're fully insured, professional, and affordable.

  • 6 years in business
About

I specialize in small to medium weldments that can be shipped directly to the customer or delivered locally.

  • 34 years in business
About

I do all metal welding, fabrication, machining, powder coating and sand blasting. I also offer boat fuel tanks and steels for sale.

About

We offer boutique welding services with satisfaction guaranteed or your money back.

About

I am a full service welder. I work on stainless, carbon, alum, fabrication of stairs, rails, custom fences, gates, structural steel and miscellaneous metals.

About

We do repair welding on metal and also light fabrication on ornamental steel. Our business is tailored to the private sector.

About

We weld gates, lightings, fences, balcony, interior and exterior railings, doorways, windows, fireplaces, kitchen hoods and textures and finishes. We are very detail oriented and like a happy customer.

About

We offer architectural and ornamental ironworks, custom furniture, countertops, staircases, art works, fireplace doors and tools as well as repairs on all metals. With 42 years of experience, there is not too many things I have not done. My website has examples of my work.

About

Gavin Welding is a general welding repair and light fabrication business. We work on construction, agricultural and steel repair, grinding and torch cutting, and also MIG, TIG and arc welding. We also specialize in hard surfacing for wear, such as construction equipment.

About

I weld black pipe from steam, gas line Premier pipe, and shut down boiler room repair. I also do structural welding from bridge iron to making a simple frame.

About

Able to travel to customer, can do weekend work. Willing to travel within Ct and local NY area

About

Established in 1978, A-Z Welding is the place for professional weld repairs. I do repair welding on construction equipment such as worn-out buckets, new cutting edges, teeth, shanks, wear edges, etc. I also gouge and weld breaks.

About

I am a welder. I do MIG, TIG, arc, aluminum, and cast iron. I have 25 years of experience. I am looking for full-time job with benefits and insurance.

About

home repairs home clean ups home maintenance ,yard work,

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

How many types of welding are there?

Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

  • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
  • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
  • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
  • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
  • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

How long is welding training?

Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

Where can I take welding classes?

Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

How much is welding training?

The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

Actual Requests

See other requests for welders in Hartford

Need a Welder Asap

Boston, MA

  • Welding type
    Arc
  • Project type
    General welding / metalwork
  • Indoors or outdoors?
    Outdoors
  • Details
    Handicap rail
Hire skilled professionals for absolutely everything.