Melrose, MA22 Aluminum Tig Welders near you

Where do you need the aluminum tig welder?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Melrose Aluminum Tig Welders

Browse these aluminum tig welders with great ratings from Thumbtack customers in Melrose.

Top Pro
North Shore Welding
4.9
from 29 reviews
  • 39 hires on Thumbtack
  • Top pro on Thumbtack
Steve B.
Verified review

Greg was really easy to work with. He met me on site to measure things out, listen to my needs and thoughts and to give me suggestions. I like him right away and contracted for the railing during our first meeting. He came to install the railing today and did a great job! I am VERY pleased and will not hesitate to use North Shore Welding for ALL of my welding needs!

  • 9 years in business
  • 15 hires on Thumbtack
Jennifer B.
Verified review

Contacted James on a Saturday evening received an immediate call back with a promise to do requested work the following day. Both James and Justin arrived on time, were very polite and professional. Could not have been happier with the work that they did. They were hired to power wash a difficult to reach area on side of house as well as outside of aluminum gutters.

Xtreme Weld LLC
4.3
from 8 reviews
  • 18 hires on Thumbtack
Irene M.
Verified review

Great craftsmanship. We had two custom pieces, a side table and fireplace trim, made of stainless steel. They were beautiful!

Weld NH
4.8
from 5 reviews
  • 10 hires on Thumbtack
Vladimir M.
Verified review

Had Damon build a custom pannier mount for my Motorcycle. He used stainless steel for the frame and did an awesome job fitting it specifically for my motorcycle. I would definitely recommend his work again.

VonHaase Metal Service
4.2
from 5 reviews
  • 7 hires on Thumbtack
Bill W.
Verified review

We had a stainless steel stern rail on our boat that was bent in many places in different ways. Frankly i was concerned that it would never be right. Troy Haase, not only did a superb job of getting it back to its original condition, he was professional in every way - timely, courteous and reasonable in his costs.

Weld Right
5.0
from 4 reviews
  • 4 hires on Thumbtack
Joe C.
Verified review

Mike was very professional and knowledgeable about this project. He fabricated a radar hinge for my boat and fixed some rails as well. His work was flawless, his ideas were spot on and the price was very reasonable. I would highly recommend Mikes work to anyone

Sundown Welding and repair
5.0
from 4 reviews
  • 8 years in business
  • 4 hires on Thumbtack
Jeff C.
Verified review

Nick welded up some 6063 Aluminum parts for me for a hang gliding rack for my truck. I had 3D CAD drawings of what the whole thing would look like and what parts I needed to be welded. I had all the pieces cut and drawings showing dimension lines of where each piece went to make each part. We met initially to go over what I was looking for and what Nick needed from me. He was busy with other work but let me know when he would be available. He was available when he said he would be. I dropped off printed drawings and the pieces. He did the welding in 1 day and I picked up the parts that night. He made himself available nights and weekends for meeting, picking up and dropping off. He gave me a call when he came across an issue that wouldn't work for welding and proposed a reasonable solution. All the parts fit and the welds look strong. The project is not complete yet, I'll have 1 more piece that needs welding and I will have Sundown Welding do the work.

  • 30 years in business
  • 1 hire on Thumbtack
Jerry C.
Verified review

I have known Ed Wiggins for many years and have utilized his quality welding & metal fabrication services on commercial as well as residential projects. Ed is honest, hard working, with great communication skills and does a clean professional job whether repairs or complete builds indoor or out. Ed has the ability and know-how to persevere on projects that present unexpected challenges and the stick-to-itiveness to complete projects right and within budget as well as make professional recommendations for design options to enhance the project. I give Ed and his company, E.P. Wiggins Welding & Metal Fabrication Services, the highest rating possible and recommend them for any weld/metal-fab services required.

Sam's Metalcraft
5.0
from 4 reviews
  • 4 hires on Thumbtack
Patrice R.
Verified review

Sean did a super professional job in saving via welding some worn out area on a stainless ice chest that is a regularly used piece of equipment in our bartending business. I was more than likely a very small job for this highly accomplished welder, but it was important to us. Sean was easy to communicate with and got the job done quickly and perfectly added years back onto our equipment. Thanks Sean!

JM WELDING & REPAIR
5.0
from 2 reviews
  • 8 years in business
  • 4 hires on Thumbtack
Mark Z.
Verified review

Jim did a great job. Ed cut a steel girder to fit a new steel header and then welded two clips the support the existing girder. Jim did a number of additional things as well for me. He had all the equipment required and was versed in safety and organizing the work. I would use Jim again for his services.

Mass Welding
3.0
from 2 reviews
  • 12 years in business
  • 5 hires on Thumbtack
Brent B.
Verified review

I am very encouraged after a phone call from Joe that he can provide the kind of service I was looking for. I am not a welder but am looking for instruction, and Joe has already introduced me to some "lay of the land" concepts so that I am confident to study further with him.

  • 4 years in business
  • 1 hire on Thumbtack
David Y.
Verified review

Great guys, understood the project and advise us on the best course of action.

  • 10 years in business
  • 1 hire on Thumbtack
Cynthia M.
Verified review

Steve took my thoughts of a design and made them reality. He is hard working, attentive to detail and creative I will definitely use him again for other projects

Welder
5.0
from 1 review
  • 1 hire on Thumbtack
Timothy D.
Verified review

Great tig welding. Will use again.

  • 2 hires on Thumbtack
About

This company provides professional welders who handle all types of welding projects. They offer dumpster and heavy equipment repair. They also do steel fabrication, and more.

  • 1 hire on Thumbtack
About

John provides TIG and MIG welding services. This professional also able to weld small turbines, stainless steels, and awnings, among others.

  • New on Thumbtack
About

Seeking for a reliable professional that provides fabrication welding services? This pro offers iron welding, plastic welding services.

  • 3 years in business
  • New on Thumbtack
About

30 + years in the trade

  • New on Thumbtack
About

Anthony Colavito offers sheet metal fabrication and aluminum service options. He is a welder who provides design, installation and planning assistance.

About

Choose Welding, Fabrication & Repair if you are looking for a team of steel fabricators in your area who can help you with your home improvement needs. They offer metal fabrication and repair services, and more.

  • New on Thumbtack
About

I have people skills team player work well with others welding various types of fabrication and hands person in the metal fabrication and weldibg feild

  • 20 years in business
  • New on Thumbtack
About

Are you planning to hire professional custom metal fabricators who offer efficient services in Melrose? Try Sign Tech. They also provide sign installation, roof truss lifting, crane services, among others.

Hire skilled professionals for absolutely everything.