Mold remediation is the process of identifying and removing unhealthy levels of mold that have colonized in a home, office, school or other building. Over time, if untreated, mold can destroy a home by breaking down cellulose-based materials (like wood or ceiling tiles) and causing a slow and messy decay. In the shorter term, a mold infestation can cause severe health problems. According to the Federal Emergency Management Agency (FEMA), mold can trigger respiratory problems, nasal and sinus congestion, eye irritation, nose or throat irritation, skin irritations, problems with your nervous system, and aches and pains. Mold inspection and mold remediation are often requested in tandem, although they are two separate services. Nationally, mold inspection costs range from $250 to $300. If mold has been positively identified in your house, either by visual examination or through mold testing, remediation can safely remove it. Properly trained and equipped professionals use specialized equipment (like vacuums and air scrubbers with HEPA filters) to keep mold spores contained while they remove contaminated materials and treat infested areas with antimicrobial spray. A key component to a successful mold remediation after eliminating the mold is ensuring that the water source that caused the mold infestation is also resolved.
How often you should clean your air ducts depends on your situation. If you or someone in the home has asthma or is acutely allergic to certain airborne materials or pollen, regular duct cleaning may be helpful. The Environmental Protection Agency doesn’t have an official position on the necessity of air duct cleaning unless the ducts have been contaminated by rodents, insects or mold, or you are aware of particles blowing out through the vents. The EPA recommends you have your air ducts cleaned on an as-needed basis. The National Air Duct Cleaners Association (NADCA) suggests having air ducts cleaned every three to five years.
Be cautious with companies that offer “whole house air duct cleaning,” urges the NADCA. The company may be using unscrupulous tactics to upsell you once they get started. Before any work begins, always clarify in writing what the job entails and what the cost will be. To protect yourself against fraud, read customer reviews and verify that your HVAC cleaning service has applicable licenses and certifications.
When starting a home remodel or new construction project, you will probably hire a general contractor. A general contractor is a professional who is qualified to take a set of building plans and construct them as outlined. The general contractor may help perform the day-to-day building, or they may just hire workers and oversee all the work activities. In either case, the job of the general contractor is to see that your project gets built.
When you have a building project, ask for bids from various contractors. The bids tell you how much each will charge and what their scope of work will be. Once you have selected a bid, you sign a contract with that general contractor outlining the specifics of the project and the milestones during the project when they will receive payment installments. Once the contract is official, the general contractor will bring in their crew to begin construction. The contractor will manage the workers and subcontractors (anyone who doesn’t work directly for their company but that they need to outsource, like a marble installation pro), order all the materials, obtain work permits, and confirm that all the workers and subcontractors are completing their projects as planned. They typically handle all the payments to the workers and subcontractors, and send you invoice. For all these reasons, it’s also especially important to follow a few smart hiring practices when it comes to finding a general contractor. If you are organized and competent to oversee construction projects, and are able to make sure everything is being built properly and meeting code, it’s possible you can be your own general contractor.
Mold remediation can eliminate mold colonies from your home or business. Mold is a normal part of daily life, but in wet or humid settings mold can quickly colonize and spread by making spores. Whether visible or hidden, untreated mold can cause real health problems and cause extensive (and expensive) damage to your property. Mold remediation involves killing the mold, removing the dead mold and preventing future mold growth. Here is an example of the steps involved in professional mold remediation:
- Contain work area and apply negative air pressure HEPA air purifiers to prevent cross-contamination. If spores spread, the colonies can easily regrow elsewhere in your home.
- Mist an EPA-registered antimicrobial to suspend and kill mold spores.
- Remove affected building surfaces.
- Bag and dispose of contaminated materials properly.
- Treat cavities/underlayment and dehumidify.
- Abrasively remove dead loose mold.
- Apply EPA-registered protective sealer.
- Perform clearance testing.
Remove containment materials.
Mold testing can help identify a mold infestation in your home or business. Mold inspection costs can vary based on the type of test you want done and the number of samples you request. The national average mold inspection cost is $250-$300. The EPA explains that if you have a visible mold problem, in most cases sampling and testing is unnecessary. However, if you have unexplained and potential mold-related illness or can smell mold in your house, mold inspection costs may be a good investment. To avoid unscrupulous testers, the EPA recommends working with a testing agency that adheres to the analytical methods laid out by professional organizations such as the American Industrial Hygiene Association or the American Conference of Governmental Industrial Hygienists. Mold inspection costs can vary based on the type of testing done. Prices can also vary, depending on the size of the home, the number of surface areas to be tested, and the extent of the mold infestation. Here are some examples of mold inspection average costs:
- Swab testing: $200-$300
- A professional collects a surface swab from a potentially infested area for testing in a lab. Some professionals have concerns about this being the sole test done because it only gathers a small amount of data from a certain area of the house. That’s why it’s frequently done in conjunction with air cell testing.
- Air cell testing: $250-$350
- A professional collects an air sample in the home to measure the amount of mold spores in the air. This test is frequently done in conjunction with swab testing to ensure more complete data. Costs are higher for this test because the equipment required of the contractor is more expensive.
- Both air cell and swab tests provided by the same company: $400-$600.
Air duct cleaning is done by heating, ventilation and air conditioning (HVAC) professionals. The pros use industrial-strength, truck-mounted vacuums and powerful brushes and hoses to clean inside the metal ducts that make up your forced air heating and cooling system. The Environmental Protection Agency recommends duct cleaning if there is “substantial visible mold growth inside hard surface ducts, ducts that are infested with vermin such as rodents or insects, or ducts that are clogged with excessive amounts of dust and debris and/or particles are actually released into the home from your supply registers.”
You should also have air ducts cleaned after recent water contamination or water damage to prevent mold; after renovations or remodeling to ensure debris and dust didn’t settle in the vents and ducts; if you are having problems with allergies or asthma; or when you are moving into a newly purchased home, especially if the previous owners smoked or had pets. The National Air Duct Cleaners Association (NADCA) recommends getting your air ducts cleaned every three to five years, or every two to three years in regions where homeowners use their air conditioning and heater for many months of the year, while the EPA suggests homeowners have duct cleaning done as needed.
If you’re doing a home remodel, building a new home or embarking on a commercial building project, you’ll hire a general contractor. A general contractor is a professional who is qualified to oversee and execute construction projects. Each construction project is unique; even two duplicate homes built on lots next door to each other could have different construction costs due to factors like different excavation costs when building the foundation. Since each project is unique, many general contractors make bids on potential construction projects. These bids can then break down to a per square foot cost that encompasses the labor of all the workers needed for the job, materials, the scope of work, and any equipment needed. Materials and finishes make a major difference in your cost per square foot. For example, choosing standard kitchen tiles at $3 per square foot will result in a lower total project cost than imported marble tiles that cost $63 per square foot. Where you live will also affect how much general contractors charge, as labor and the cost to do business can cost less in many regions than in high-cost areas like New York or San Francisco. Here are some examples of average costs general contractors typically charge in various regions:
- Home addition in San Francisco: $250-$270 per square foot.
- New home construction in Knoxville, Tennessee: $100-$200 per square foot.
- Kitchen remodel in Tennessee: $40-$80 per square foot, depending on finishes.
- Bathroom remodel in Vancouver, Washington: $110-$170 per square foot.
Be sure to check out our smart hiring practices when it comes to finding a general contractor.
Mold remediation can be hazardous to the health. DIY cleanup is possible if your health and abilities permit it, but the Environmental Protection Agency recommends hiring a professional if your mold infestation is 10 square feet or larger. The cost per square foot for mold remediation will vary based on where you live (regional labor rates), the size and severity of your mold infestation, and the accessibility of the mold colonies. Here are some examples of mold remediation average costs per square foot:
- Basic mold remediation in attics and crawl spaces: about $2 per square foot.
- Mold remediation involving demolition: about $4 to $6 per square foot.
- Mold treatment of 15 square feet in an accessible area with a less aggressive type of mold: $3,400.
- Price includes mold inspection costs.
- Mold treatment of 27 square feet inside an HVAC system requiring a higher level of chemicals and processes: $9,500.
- Price includes mold inspection costs.
No one wants to have a mold infestation. Mold can lead to illness, lowered property value, and damage to your home or building. If you’re concerned about mold, mold inspection costs may be a wise investment in your health and home. Any home will have a small amount of mold; it’s a naturally occuring part of the environment. However, if water or moisture is left to sit, mold can begin to colonize in as little as 24-48 hours, especially if you live in a humid climate. Signs of mold colonies in your house include a musty, earthy odor (from mild to overpowering) that can ebb and flow with air current changes and moisture levels; water staining or discoloration spreading on the walls or floors over time; and health problems such as respiratory problems, nasal and sinus congestion, eye irritation, nose or throat irritation, skin irritations, problems with your nervous system, or aches and pains. Mold can be especially dangerous for people with compromised immune systems. Nationally, mold inspection costs range from $250 to $300. A reputable mold remediation company can provide helpful information about the best next steps.
The cost to clean up mold in your home or business will vary based on the pervasiveness of the mold infestation, regional labor rates, and the accessibility of the mold sources for remediation. Mold remediation costs will increase anytime demolition is necessary or the crew must access interior areas like HVAC ducts. For example, these two homes have approximately the same size floor plan but a different number of square feet of mold to be treated. The two homes also have varying levels of accessibility to the sites of mold the mold infestation.
- House 1:
- Mold treatment of 15 square feet in an accessible area with a less aggressive type of mold: $3,400 (average).
- Price includes mold inspection costs.
- House 2:
- Mold treatment of 27 square feet inside an HVAC system requiring a higher level of chemicals and processes: $9,500 (average).
- Price includes mold inspection costs.