Rochester, NH19 Aluminum Tig Welders near you

Where do you need the aluminum tig welder?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Rochester Aluminum Tig Welders

Browse these aluminum tig welders with great ratings from Thumbtack customers in Rochester.

Top Pro
North Shore Welding
4.9
from 29 reviews
  • 39 hires on Thumbtack
  • Top Pro on Thumbtack
Steve B.
Verified review

Greg was really easy to work with. He met me on site to measure things out, listen to my needs and thoughts and to give me suggestions. I like him right away and contracted for the railing during our first meeting. He came to install the railing today and did a great job! I am VERY pleased and will not hesitate to use North Shore Welding for ALL of my welding needs!

Xtreme Weld LLC
4.3
from 8 reviews
  • 18 hires on Thumbtack
Irene M.
Verified review

Great craftsmanship. We had two custom pieces, a side table and fireplace trim, made of stainless steel. They were beautiful!

Sorensen Handyman Services
5.0
from 6 reviews
  • 3 hires on Thumbtack
Bonnie F.
Verified review

Tom Sorensen started under my contractor, hired to transform/renovate my new condo. Tom began on the job as a painter primarily and bit by bit I observed even greater and more varied talents. While painting I was observed that Tom was great at his job, pleasant to have around, and he always left after all was cleaned up each day. My idea for the master bedroom was to paint stripes alternate colors to look like wall paper but in my exact size and color choices. The job turned out superbly so we did this same process except, using different measurements in the hall guest bath. All looks great. After the renovation was completed, I have employed Tom has a handy man. He saved a fine but old and weak cocktail table by taking it apart, regluing and then cleaning it up like new. Then when a 4 foot wall was taken down and we all found an ugly pole in the middle of a now open room, Tom suggested a french technique, trompe'loile (forgive spelling, please) which makes my newly painted column look like it is fluted (it is not ) and in the two colors of the room, done with antique faux cracks, etc, Trust me, it is fabulous. And now Tom is saving an antique Register Clock that fell from the wall. I expect that when I get it back it will perform as new, still look antique....but put back together with loving care. And electrical problems sees easy to accomplish too. Tom is a really good guy and I wish him luck in his new business with himself as CEO. You can trust him, and as long as his vehicle is running, he will always be on the job.

Weld NH
4.8
from 5 reviews
  • 10 hires on Thumbtack
Vladimir M.
Verified review

Had Damon build a custom pannier mount for my Motorcycle. He used stainless steel for the frame and did an awesome job fitting it specifically for my motorcycle. I would definitely recommend his work again.

Weld Right
5.0
from 4 reviews
  • 4 hires on Thumbtack
Joe C.
Verified review

Mike was very professional and knowledgeable about this project. He fabricated a radar hinge for my boat and fixed some rails as well. His work was flawless, his ideas were spot on and the price was very reasonable. I would highly recommend Mikes work to anyone

Sam's Metalcraft
5.0
from 4 reviews
  • 4 hires on Thumbtack
Patrice R.
Verified review

Sean did a super professional job in saving via welding some worn out area on a stainless ice chest that is a regularly used piece of equipment in our bartending business. I was more than likely a very small job for this highly accomplished welder, but it was important to us. Sean was easy to communicate with and got the job done quickly and perfectly added years back onto our equipment. Thanks Sean!

Sundown Welding and repair
5.0
from 4 reviews
  • 8 years in business
  • 4 hires on Thumbtack
Jeff C.
Verified review

Nick welded up some 6063 Aluminum parts for me for a hang gliding rack for my truck. I had 3D CAD drawings of what the whole thing would look like and what parts I needed to be welded. I had all the pieces cut and drawings showing dimension lines of where each piece went to make each part. We met initially to go over what I was looking for and what Nick needed from me. He was busy with other work but let me know when he would be available. He was available when he said he would be. I dropped off printed drawings and the pieces. He did the welding in 1 day and I picked up the parts that night. He made himself available nights and weekends for meeting, picking up and dropping off. He gave me a call when he came across an issue that wouldn't work for welding and proposed a reasonable solution. All the parts fit and the welds look strong. The project is not complete yet, I'll have 1 more piece that needs welding and I will have Sundown Welding do the work.

Mathews Construction
5.0
from 2 reviews
  • 1 hire on Thumbtack
Kristie W.
Verified review

I first hired Bob to do some interior painting, he did a wonderful job, after talking with him I knew he was a professional at what he did, so we had him build a deck, and install a sink for us. His professionalism was outstanding, I would have Bob do any kind of construction work for me again. I would also recommend him to others! Completely happy with all he did!

  • 4 years in business
  • 1 hire on Thumbtack
David Y.
Verified review

Great guys, understood the project and advise us on the best course of action.

  • 5 years in business
  • 4 hires on Thumbtack
Gary C.
Verified review

great service ,professional person ,work was done quickly. A1

D. Clement, Inc.
5.0
from 1 review
    Gary Machinery Associates C.
    Verified review

    We use D Clement exclusively for a reason; they are able to do anything we need and more. from small machinery moves to big systems and plant cleanouts as well as structure repairand/or customizing.

    About

    Spring Welding & Fabrication is one of the top companies in Rochester that can provide aluminum TIG welding and sheet metal fabrication services. This company is always available to complete your metalwork projects.

    About

    30 + years in the trade

    About

    Planning to hire a professional local welder who offers quality aluminum TIG welding services in your area? Choose Geoffrey Finigan. This expert has been in this industry since 2000.

    • 1 hire on Thumbtack
    About

    Tired of looking for a provider who specializes in custom sheet metal fabrication and professional welding services? Hire Xtreme Iron Designs. This company offers flexible prices.

    About

    I have people skills team player work well with others welding various types of fabrication and hands person in the metal fabrication and weldibg feild

    About

    I do not really do as others do although I can. People seek my advice for overcoming impossible problems. If I cannot help, than most likely the need for help or work is unavailable. Generally most businesses express free quotes. I do not quote a job. I define it and translate the work into a cost and advise where to get the work fulfilled…it is free intel.

    About

    I am a certified welder who does shop work, such as frame repair and anything custom to fit your needs, and I also do site work for I am mobile and can come to you. I do the jobs that people do not want to do. I do a lot of repair works on tractor equipment, and I can transport any kind of vehicle to my shop and repair it.

    • 20 years in business
    About

    If you want a group of professionals in Farmington who will do aluminum welding services, consider Sign Tech. Sign Tech has over 17 years of field experience.

    Hire skilled professionals for absolutely everything.