Lansdale, PA20 Metal Workers near you

Where do you need the Metal Worker?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Lansdale Metal Workers

Browse these metal services with great ratings from Thumbtack customers in Lansdale.

James E. Funk Carpentry
5.0
from 28 reviews
  • 30 years in business
  • 29 hires on Thumbtack
Adam B.
Verified review

Jim was called in to remove some freestanding cabinetry, demolish a chest-high room parition, and replace the vinyl tiles beneath both in a commercial setting. Jim was very responsive, both visiting us and givingus an estimate within 24 hours. He was also able to schedule to do the work within 24 hours of our agreeing to the estimate. Leaving virtually no mess, the cabinetry and partition were removed and the floor seemlessly repaired in about eight hours. He didn't mark up materials and his rates are very affordable. I would happily recommend Jim for both demolition and construction work. He was knowledgeable, responsive, efficient, and fairly priced.

Top Pro
  • 5 years in business
  • 31 hires on Thumbtack
  • Top pro on Thumbtack
Jerry C.
Verified review

Ive been looking for someone to do metal work for me for some time. I have googled and no one online offers small jobs. Then I remember a friend of mine recommended thumbtack to me so I searched for someone and found Dan. Dan contacted me and I gave him a brief description of what I had wanted done. I only had 1 picture and the picture was not the best, however, he did a great job with my paper tray rack. The job was to weld 3-4 paper trays on a sideways diagonal stance on a piece of metal with 1 above the other. He was very communicative with me. He showed me a picture before he would weld it and asked me to make any changes if needed. If I wanted to space the trays out a little more or if I wanted to add the 4th tray, and if I did it would be this certain height. If I didn't he can continue with the job. If he added the 4th tray, the cost would not increase. Honestly, Dan is a great person to work with. He even asked me why don't I just buy something to hold these trays up. I searched and couldn't find what I wanted. It was the fact that he did not push me to hire him even at the meet up to give him the trays. He gave me options tip the end. That shows the type of person Dan is. I hope to have future projects for him to do and he will be the first person I contact for any metal work, as you should, too. The best part was that he lived close enough to save me shipping it to him. NJ has cheaper gas than Philly so the drive made up for the shipping for me. The paper tray rack came out great, thanks again.

Right Way Welding
5.0
from 22 reviews
  • 7 years in business
  • 31 hires on Thumbtack
Leah L.
Verified review

Pete added a metal railing on our existing rails. He is a true artist and welder. Great experience and excellent job!

Bulletproof Welding
4.5
from 21 reviews
  • 32 hires on Thumbtack
Andrew S.
Verified review

I had some stainless steel exhaust parts I needed welded together and he was able to do it very well. It came out perfectly, and working with him was very easy. He took the time to make sure everything I needed was done right, and kept me in the loop about what he was doing the entire time. Very professional work, would absolutely work with him again. Highly recommended! Thanks Neiko!

KMS Welding
5.0
from 15 reviews
  • 17 hires on Thumbtack
Jason C.
Verified review

I hired KMS Welding to do some fab work I wanted done on my boat based on our initial meeting. He is very knowledgeable and offered some great ideas as to how we could make the job stand out from others. He was a pleasure to work with and wouldn't hesitate to use him again on future projects. Thank You Ken....outstanding work.

Fulmer Designs LLC
5.0
from 8 reviews
  • 2 hires on Thumbtack
Jennifer G.
Verified review

JR is the best carpenter/handyman to work with ever! If you need help with something small or large, he is trustworthy, easy to talk to, easy to have around, smart, and most importantly, great at what he does. He's creative and won't over price. He is so great, I'll be hiring him again!

  • 32 years in business
  • 2 hires on Thumbtack
Becky F.
Verified review

Fast, thorough, and polite service. In addition to looking over my chimney to determine if it needed repointing, I also had William and his team clean my gutters. I am very happy with their service and look forward to working with them again in the spring.

Andrew's Mobile Welding
4.9
from 7 reviews
  • 2 years in business
  • 8 hires on Thumbtack
Christopher C.
Verified review

Andrew came out to my residence to weld repairs to my metal deck. He was punctual, very professional and affordable. Andrew exceeded my expectations by inspecting my deck, pointing out more problems then what I had realized and making the repairs. Not to mention, at the same price quoted. A huge plus for me, he cleaned up after himself. I will definitely call him again for future repairs and so should you.

All Welds and Fabrication
5.0
from 1 review
  • 8 years in business
  • 2 hires on Thumbtack
About

I fabricate and weld any type of metal, including all alloys. I can also hard face any steel or alloy material, i.e. lawnmower blades, leading edges of snowplows, and buckets for backhoes, to extend service life. I have certifications for all weld processes, including MIG, TIG, stick, pulse, spray, orbital, soldering, brazing (including medical gas brazing). My specialties are pipe, tube, and artistic fabrication and welding per client specs. I have the ability (and prefer) to read and fabricate from blueprints or sketches for the proposed project. I also provide layout and sketching/mechanical drawing for a project. My goal is 100% customer satisfaction. I achieve this goal by providing a high-quality product with an emphasis on safety, business ethics, customer service and satisfaction, and attention to detail. Customers appreciate the fact that I always strive to exceed expectations and do it right the first time. I also devote all of my attention to the task at hand and consistently meet timeline requirements set by the customer. I weld any metal the way you want it and when you need it.

  • 4 years in business
  • 2 hires on Thumbtack
Eric W.
Verified review

We were extremely pleased with the product and service from Twisted Concepts. We needed an exterior railing installed to meet Norristown code requirements and Twisted Concepts was extremely accommodating. They got the railings built and installed quickly and on time, Joe (I believe that was his name) even added some very nice embellishments. Our railings now make our neighbors' railings look like chumps. I would not hesitate to call Twisted Concepts for any future projects.

  • New on Thumbtack
About

Testing and troubleshooting within electronic systems and components are offered. The following are offered: * Forklift operation and all pallet moving equipment * Metal fabrication (machinist) * Plumbing and drains * PLC testing and troubleshooting * Electronics panel building experience * In-shop electric wiring * Small carpentry repairs * Map reading and delivery skills

About

Nicholas Evanoff Roofing, with over 60 years of experience, offers custom metal fabrication services that will suit your needs. They offer a wide variety of services such as metalwork, roofing and electroplating.

  • 19 years in business
  • New on Thumbtack
About

Looking to find some of the providers who will do iron and aluminum fabrication? This company can help you out. Christy Welders & Fabricators, L.L.C. started offering all metals fabricating services 31 years ago.

  • New on Thumbtack
About

Our experienced personnel is proficient in steel, stainless steel & aluminum. Other services we offer is laser cutting, shearing, pipe-fitting, punching, bending, grinding, drilling and press breaking. We can repair, install and fabricate to your needs.

  • New on Thumbtack
About

Scott's Metal Shop offers screen printing for any special occasion or just for fun! I am also a welder for the past 20 years with a lot of experience. I can fix or make anything for you! Check my eBay out and look for custom welder. Also, feel free to contact me by e-mail or telephone for any question.

  • 13 years in business
  • New on Thumbtack
About

We do custom wood and metal work. We treat every job as if it were a million-dollar project and as if it were our own! Customer satisfaction is our main concern and pleasure!

  • New on Thumbtack
About

Choose the custom welding and metal management services of this credible individual. Clarence Cruz has also been handling new construction, landscaping, roofing and demolition for the past decade.

About

Are you looking for a reliable welder who offers quality metal cutting services? Hire Eric Gilmore as he provides you with custom metal works. They also provide layouts, mig welding saw cutting and more.

  • New on Thumbtack
About

We do 1-inch standing, seam copper roofing, steal roofing, and all other metals available onsite up to 1,000 miles. We also do tapered panels and barrel roof panels. Commercial and residential trim packages include vented details and also CNC plasma and laser cutting, light welding and powder coating in shop only.

About

I do services and installations of heating and central air conditioning. I work on heat pump, gas, oil, and electrical services. I also provide a 24-hour emergency service.

  • New on Thumbtack
About

We are a metal roofing company that is specialized in metal roofing in the state of New Jersey, servicing all parts of NJ.

  • New on Thumbtack
About

I enjoy custom projects. I have 30 years of experience in metal fabrication and welding. I have a lot of projects that I've done through the years.

  • 6 years in business
  • New on Thumbtack
About

When becoming involved in a prospective clients projects, we start with their requirements and proceed from there so customer gets exactly what they are looking for. Each project is created to provide a lasting quality and guaranteed craftsmanship.

  • New on Thumbtack
About

I haul away any metal for free. I will demo out any metal free of charge. I also provide an affordable clean-out service, either the whole house or just an attic or basement or garage. I remove swimming pools, oil tanks, furnaces, air conditioners, freezers, refrigerators, radiators, any and all metal. My labor is free to remove the metal. My payment is the metal.

About

I do quality metal fabrication and have attention to detail with superior craftsmanship. I work on welding aluminum, stainless, and carbon steel.

  • 60 years in business
  • New on Thumbtack
About

With expertise across many industries, applications, and materials, the Richard L. Sensenig, Co. is pleased to offer full custom metal fabrication services. We serve customers in the construction, wastewater, agricultural, food services, environmental, and material handling sectors, as well as many others. The extensive list of materials with which we work includes carbon steel, aluminum, stainless steel, iron, lead, light metals, copper, and architectural metals. Our fabrication equipment and plasma table are capable of producing metal parts up to 1 1/4" thick, suitable for diverse applications. Our craftsmen are experienced in multiple processes that include bending, sawing, stitching, welding, and cutting metal that is customized to meet our customer's needs. Our custom metal fabrication services do not stop once your parts are fabricated. We also handle the assembly, painting, structural steel erection, installation, and much more

About

We do welding and metal fabrication services. We specialize in wrought iron railings. We also do residential or commercial repairs.

  • 9 years in business
  • New on Thumbtack
About

For many years, United Metal Construction has been offering the most reliable and high-quality metal welding and manufacturing services in Philadelphia and the surrounding areas. We are proud to be recognized as one of the area's absolute best. We specialize and work with machine shops, sheet metal companies, solar and semiconductor systems, as well as engineering corporations. In addition, we also offer on-site services to small to medium-construction projects. Our services are as follows: welding services, sheet metal fabrication, sheet metal sales, steel fabrication, machine shop services, draft shaft repairs, heavy equipment repairs, piping services, design and engineering, cutting and custom works. Our specialties are as follows: metal roofing, metal siding, fabricating, metal and steel, tubes, pipes and cutting.

  • 79 years in business
  • New on Thumbtack
About

Kaller & Sons Contractors has been providing metal roofing services for more than 7 decades. They offer custom sheet metal fabrication, carpentry, chimney and masonry repair, roof restoration, and more.

Hire skilled professionals for absolutely everything.