Carrollton, TX12 Sheet Metal Fabricators near you

Where do you need the sheet metal fabricator?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Carrollton Sheet Metal Fabricators

Browse these sheet metal fabricators with great ratings from Thumbtack customers in Carrollton.

  • 19 years in business
  • 121 hires on Thumbtack
Bryan W.
Verified review

Bruce and Co. took on a special restoration project for me involving a ornamental brass flamingo that was broken off at the legs. He figured out how to not only repair the brake at the legs but also shifted the legs forward somewhat so that the body of the bird could be brazed to the ornamental bass beneath the bird as well. All-in-all, very well done and now the ornament is stronger than original. I would highly recommend N. Dallas Wrought Iron Doors for any metal work project you might have.

Ascot Fence
4.7
from 52 reviews
  • 9 years in business
  • 73 hires on Thumbtack
Patti N.
Verified review

Best choice ever! We hired Andre to put in a driveway out to the husband's new "man-cave" metal building. The building sits up 9" and it's location wasn't exactly straight with the existing driveway which caused the placement of this driveway to be creative in order to not look out of place. Andre and his crew framed in the proposed design to give us a visual first. Which was a good thing as I noticed right away one side of the drive didn't flow right it just seemed awkward. Andre listened and gave me the opportunity to take some string to show him the adjustments I thought would make it flow better visually. Andre went with the adjustments made and we couldn't be any happier with the end results, the driveway looks great! So now that the driveways done it's my turn. The husband so pleased with the reasonable cost of the driveway and asked Andre if he could hire him to install a fence. So we're onto the next project with Andre and I'm 100% sure it will be the best. I say this because he's already helping us take back the wood we bought to exchange so it will last more than 2 years; we didn't choose the right type of wood. We so appreciate his honesty. We highly recommend Andre for your project(s).

  • 10 years in business
  • 93 hires on Thumbtack
Trey T.
Verified review

Quality work, fence is solid metal. Better than the screw together kind. We did have some communication issues on a smaller part of the project to fix a pre-existing driveway gate. Chad was willing to work to find an agreeable solution that we both were ok with considering the circumstances.

Top Pro
Raleigh Fence
4.9
from 32 reviews
  • 14 years in business
  • 37 hires on Thumbtack
  • Top pro on Thumbtack
Russell T.
Verified review

Showed up when he said he would. Actually called and asked if he could come 45 minutes early. This is good! Did a good job of repairing the weld on my tiller. I was very satisfied. I would use him again.

Top Pro
  • 17 years in business
  • 22 hires on Thumbtack
  • Top pro on Thumbtack
Jim J.
Verified review

Desi did what he said he was going to do, when he said he would do it. Both materials and workmanship were first class. The design was outstanding and the installation was both sturdy and neatly done all at a price that represented good value. He provides 5 star service at a 4 star price and I very strongly recommend him.

Dynasty welding and 4x4
4.2
from 21 reviews
  • 1 year in business
  • 31 hires on Thumbtack
George V.
Verified review

Relocated two hangers on the back of a metal frame mirror.

Goldermann Welding
5.0
from 15 reviews
  • 5 years in business
  • 20 hires on Thumbtack
Buster W.
Verified review

If your looking for a professional welder and metal fabricator, look no further. I couldn’t be happier with the outcome of our job from Goldermann Welding. These guys have a wealth of knowledge in the industry and were very professional from start to end. They worked hard from dawn and into the evening until the job was done. Thanks!

  • 18 years in business
  • 4 hires on Thumbtack
Francisco C.
Verified review

I had two fenders a quater panal and a couple of other small but delicate stress fractures on my car. Dwayne arrived on time and did an incredible job of repairing all of the damages. Very experience and pays close attention to details! I would highly recommend him for any welding job!

Rockin. S. Welding
5.0
from 3 reviews
  • 7 years in business
  • 3 hires on Thumbtack
Mike N.
Verified review

Wow! Robert really is a rock star in terms of quality and reliability. He did exactly what he said he would and provided very knowledgable options. We will definitely be calling again. I couldn't be anymore happier with how our metal pool fence was repaired for our hotel. Thank you!!!

Home Grown Metal Fab
4.3
from 3 reviews
  • 4 years in business
  • New on Thumbtack
Christopher L.
Verified review

I had Nathan weld up a broken door hinge on my jeep door he did a good job door closes just fine and the pin striping lines up like it was from the factory

  • 13 years in business
  • 3 hires on Thumbtack
Daryl P.
Verified review

Built gates for Yard fences.. both Steel sliding gates and metal framing for board on board cedar. Installed soft and facia in Hardi and Smart side, caulk ed and painted. Bathroom remodels as well..

Fabrication Welding
5.0
from 2 reviews
  • 1 hire on Thumbtack
Alexandria N.
Verified review

Jacob went above and beyond with my welding project. He fixed an antique wrought iron bed that I love! He even managed to match the paint color which was no easy feat!!! I could not recommend him highly enough.

Big Sky Metals
5.0
from 1 review
  • 1 hire on Thumbtack
Daniel R.
Verified review

Great work guys! Thanks again, DR

Viking Fabrication
5.0
from 1 review
  • New on Thumbtack
James N.
Verified review

This guy is great my trailer tongue need to be welded back on and it looks amazing and twice as strong then before thanks for all your hard work

  • New on Thumbtack
About

My company specializes in welding, custom fabrication, metal buildings, fence removal, repair, and installation; however, we are not limited to these things.

About

We provide a quality welding service for our customers. We have been in business for ourselves over 15 years and are continually growing and trying to improve our services. We have in-house shop welding services and provide field services as well. Our welding capabilities are MIG, TIG, flux core and stick. We can weld mild steel, stainless, aluminum, cast iron and numerous other alloys.

  • New on Thumbtack
About

Mad Mech Fabrications is a One-Stop shop that can come to you offering a variety of services everything from welding and fabricating to Towing and Hauling and installations

  • New on Thumbtack
About

Family owned and operated, respectful, punctual, willing to go the extra 10% to ensure the customers satisfaction. Anything from a custom hinge, to an entire pipe fence, equipment repair, car ports, smaller metal buildings, custom fabrication, and just about anything else you can think you might need.

  • New on Thumbtack
About

We will fabricate any machined parts and hole punches to abrasive paper, cardboard, leather and many other industries' specifications. We fabricate any ferrous or non-ferrous parts at very competitive prices.

  • New on Thumbtack
About

We fix and weld metals to your specifications. We can use MIG, TIG, stick, flux-core. We have our own protective gear.

  • New on Thumbtack
About

Fully customized stainless steel work of all kinds. 10 years of experience in the food industry. Well versed in FDA and Department of Health regulations and guidelines. We do custom food trucks, residential and commercial kitchens, BBQ grills and smokers, and any repairs you might need.

Actual Requests

See other requests for sheet metal fabricators in Carrollton

Need a Welder

Plano, TX

  • Welding type
    MIG, Arc, TIG
  • Project type
    Automotive
  • Work location
    Indoors, Outdoors
  • Details
    aluminum welding

Need Welding Service

Keller, TX

  • Welding type
    MIG
  • Project type
  • Work location
    Indoors, Outdoors
  • $150
    Average price
Hire skilled professionals for absolutely everything.