Cedar Hill, TX28 Mig And Tig Welders near you

Where do you need the mig and tig welder?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Cedar Hill Mig And Tig Welders

Browse these mig and tig welders with great ratings from Thumbtack customers in Cedar Hill.

  • 19 years in business
  • 123 hires on Thumbtack
Keith S.
Verified review

Outstanding service and terrific work. I actually requested quotes from other welders before finding Bruce and was giving a price I thought was too high for the work I needed done. I even had a couple welders tell me they did not want the work. Within 15 minutes if requesting a quote on Thumbtack, Bruce gave me a call with a great price. Took the material to the shop and Bruce said it was no problem, would be about 48 hours. Got a call 2 hours later saying it was done. Not only did the pieces look great, Bruce painted them and added finishing touches. Even attempted to charge me less but I had no problem paying more because it was quality work. I highly recommend Bruce for any welding or fabrication needs.

  • 4 years in business
  • 74 hires on Thumbtack
Fitsum T.
Verified review

If I need a welder I’ll call Cody Braughton with Braughton and Sons fencing. I needed to replace a trailer jack the same day. He came through for me. He arrived on time and got it done in no time. He did an excellent job. I’m very satisfied with the job. I’ll recommend him and Braughton and Sons fencing to anyone needing a welding job.

  • 19 years in business
  • 36 hires on Thumbtack
Rick G.
Verified review

Matt did a fantastic job repairing an irreplaceable grille bracket for my Sunbeam Alpine grille with his MIG welder. He did it while I waited and the charge was very reasonable. I would not hesitate to use Matt again for any of repair or replacement needs. Besides, he's a great guy to talk to!

Bar Z Welding and Repair
5.0
from 22 reviews
  • 3 years in business
  • 28 hires on Thumbtack
Kim L.
Verified review

JB Treece did welding for me on a 1950 era grain drill....all cast iron. I had previously been told cast iron was near impossible to weld and that very few people actually do it. Clearly my informants never met JB. He did a great job. Looks as good as new and works perfectly. I couldn't be more pleased.

Top Pro
  • 17 years in business
  • 26 hires on Thumbtack
  • Top Pro on Thumbtack
Javier A.
Verified review

By far one of the best welders i found,the job was done fast, on time and very clean. Desi was very professional and knowledgeable. the best thing was that his prices are great compared to other contractor. I will definitely recommend and use D&M welding.

Dallas Mobile Welder, LLC.
4.9
from 18 reviews
  • 3 years in business
  • 14 hires on Thumbtack
Steven C.
Verified review

Great communication from the initial conversation to finished product. Repaired another welders patch job that broke almost immediately after they repaired it. Highly recommend for any welding issue. I will be using you again!!

Goldermann Welding
5.0
from 15 reviews
  • 5 years in business
  • 20 hires on Thumbtack
Jonathan H.
Verified review

Goldermann welding repaired a stainless steel sink for me and I recommend them to anybody who has any metal repairs. They were really professional and would do anything to get the job done.

JR Metal Fabrications
5.0
from 7 reviews
  • 10 hires on Thumbtack
Duresameen S.
Verified review

My mother-in-law had very specific barstools that were practically custom to her kitchen. She didn't want to get rid of them but they were in bad shape from general wear and tear over the years. I had happened to come across Jesse's information when reaching out for welders or any type of professional that was willing to tackle this project. Jesse came across as a sincere, friendly and hardworking professional. He emailed me to ask me some questions about the project and I sent him some pictures of the barstools. He didn't oversell his abilities or make wild claims about how he could or would transform these chairs. Based on the pictures, he made realistic assessments as to how the barstools could be salvaged and how much he would have to change the aesthetics of the barstools while still retaining their original charm. It was very important to my mother-in-law that these barstools not sway too far from their original look as they matched her kitchen very well. She was however, looking for strong reinforcements throughout the structure of the barstools, including the foot holders, shaped like rings, that were made from wood and had major cracks in them or had fallen off completely over the years. She wanted them reinforced with metal mainly or any element that could withhold weight so she wouldn't be left with broken foot stools in the future. She had also wasted a lot of money over the years hiring pros to repair or replace the wood and this time, she was looking for a more permanent fix. I had spoken with a few other welders or similarly skilled pros but some of them were quoting me crazy prices right out the gate while one other didn't even have the courtesy to ever return my texts or voicemails after our initial conversation. It was for the better because I doubt any of them could have transformed the barstools the way Jesse did and he was open to but realistic with my budget! The attention to detail on those chairs is stellar. My mother in law loves her barstools and received many compliments on the work Jesse did to restore them. He even went the extra mile to paint the reinforcements a rich color to enhance the beauty of the chairs, which was not an easy feat. There's no doubt that Jesse takes great pride in his work. He underpromised but definitely over-delivered! I'd like to add that I hired him for this project early last year and just got around to writing him a very well-deserved review. The fact that I felt compelled to submit a review for him after so much time has passed since he completed the work is in itself a testament to the quality of workmanship Jesse brings to the table. He truly transformed those chairs without sacrificing their original charm and beauty! My mother-in-law still thanks me for having found Jesse and saving her barstools!

Lone Star Mobile Welding
5.0
from 6 reviews
  • 5 years in business
  • 6 hires on Thumbtack
Matthew A.
Verified review

Adam is a sharp kid and a great welder. Everything he welds is top notch and always done to my specifications. I would definitely recommend him for all your welding needs.

Top Pro
FireSparrow Welding, LLC
5.0
from 5 reviews
  • 1 year in business
  • 4 hires on Thumbtack
  • Top Pro on Thumbtack
Geoffrey R.
Verified review

Adams, Is very very good at what he does as a welder. Thank you for the great work, comparable price and overall follow up. Highly recommended.

Bell's Welding
5.0
from 2 reviews
  • 23 years in business
  • 3 hires on Thumbtack
Dwain C.
Verified review

Had a leak in one of my pontoons of my boat. Had my boat with another welder for three days that guy made it worse. Mr. Bell was Very Proffessional. Mr. Bell knows his stuff. He corrected other guy screw up. Bell pressurize pontoon for anymore leaks. I was able to hit the lake that afternoon caught ten big blues. I will use Bell's welding again if need be.

Timipat W.
Verified review

I'm the manager of a self storage company. Our gate track had been so damaged that it would no longer close. You can imagine the security risk. I called Bennett after reading reviews on his site. Of course, I called two other welder's for estimates as well. Bennett called just a few short minutes after I left a voice mail. He showed up to the job site within two hours of my call. I then showed him what needed to be done. He gave me an assessment & his estimate. I agreed & he got right to work . It was completed within an hour. The job was superbly done. This man knows his craft! I won't be searching the web for another welder in my future, I have Bennett's business card and that's all I need. You can't go wrong if you call Bennett! As for the other two companies; one called me hours later and the other didn't call me at all... Thank you Bennett. I haven't had to worry about that gate jumping its track since. You have my business for life!

Jake Debus
5.0
from 2 reviews
  • 4 hires on Thumbtack
Cody P.
Verified review

I've known Jake for almost ten years and he is a top notch welder but foremost a superior craftsman. 10 star rating from me!⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️

Pete's Welding
5.0
from 1 review
  • 20 years in business
  • 1 hire on Thumbtack
Jim K.
Verified review

Pete is a great guy and fantastic welder. Without being asked, he added reinforcement plates to his weld and blended it into the assembly with a coat of paint. Affordable and fast. Will recommend and use again - JL Kitz

Mr. Summers (The Welder)
4.0
from 1 review
  • 2 years in business
Steve M.
Verified review

Mr. Summer is a very good person and friend. He offers alit of good advise.

About

I am a welder, and I have 18 years of experience in mig, tig, flux core, and hard surface. I know how I use all tools that I need for welding.

About

I am a certified welder looking to pick up side jobs until I can start my own business. If it contains metal, there's a good chance I can weld it together. I have my own welder and can travel to you in order to get the job done.

About

Welding - I love doing it. I make metal art and I paint. I try to bring an artistic eye to improve any situation. I service gates and access control systems. I have serviced gates and accessed control systems for over 5 years.

About

I am an 18-year-old welder. I passed 2G, 4G, 6G bend test. Stick, MIG, TIG, gas and brazing courses are completed at Green River High School. I recently moved back to Texas, and I am seeking work.

About

I'm a certified TIG and MIG welder. I can also read blueprints. I am a fit up and layout fabricator. I can weld stainless steel and aluminum.

About

Here at Big Boys, we emphasize pride in our work and satisfaction to our customers. Welding is what we do, and we do it well. You will also find that we're more reasonable than the most.

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

How long is welding training?

Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

How much is welding training?

The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

How many types of welding are there?

Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

  • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
  • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
  • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
  • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
  • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

Where can I take welding classes?

Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

Hire skilled professionals for absolutely everything.