New Braunfels, TX56 Sheet Metal Fabricators near you

Where do you need the sheet metal fabricator?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

New Braunfels Sheet Metal Fabricators

Browse these sheet metal fabricators with great ratings from Thumbtack customers in New Braunfels.

VNC Iron Works & Fencing
4.7
from 139 reviews
  • 6 years in business
  • 204 hires on Thumbtack
Frank L.
Verified review

Highly Recommend Chris and his services. He arrived when he said , was very professional, efficient and fast. His price was very reasonable but most importantly he completed the job exactly as i needed . Totally recommend this company for any and all of your metal needs. He will actually be doing some fence work for us soon.

Gonzales Welding
5.0
from 22 reviews
  • 7 years in business
  • 22 hires on Thumbtack
Jim W.
Verified review

I needed him to weld 4 to 6 brackets on my motor home for my leveling jacks. He said he would be here at 10:30 and arrived on the dot. I showed where I needed the brackets welded to the frame of my motor home and gave him the wrong spot on the first bracket. He was very understanding and cut the bracket back off cleaned it up. Then he tacked it on and had me look at it for verification before he completed the weld. As he was welding the rear brackets on it started sprinkling and then became a downpour as the last bracket was being welded on. He had continued through the rain until the job was completed. All through the process he was very polite and respectful. He asked me to tell him how things worked out after I installed the jacks and pumps. He told me if there were any problems he would be back promptly to fix it. Overall this is the best experience I have had with a contractor and would recommend him to anyone. He was very polite throughout the process. I brought him some ice water and his reply was "Thank you sir".

  • 11 hires on Thumbtack
Edward B.
Verified review

Eric designed and fabricated a roof mounted access hatch for my well house. The project was done on time and within the estimated budget. The workmanship was first rate. Eric is easy to work with, a good listener (a rarity these days), well versed in mechanical design and welding. We will be employing his talents on future projects.

RCT Welding
5.0
from 6 reviews
  • 4 hires on Thumbtack
Will N.
Verified review

Completed some large metal planters for my front yard. The craftsmanship and work was well done and in a timely matter. Could not have asked for better work.

Johnson Fabrication
5.0
from 4 reviews
  • 2 years in business
  • 6 hires on Thumbtack
Heather A.
Verified review

Loved our custom metal art!!! Fast turn around and BEAUTIFUL result!

ZAM's Anvil Metalworks, LLC
5.0
from 3 reviews
    Jenee O.
    Verified review

    The metal pieces I received from ZAM's Anvil far exceeded my expectations. They were so easy to work with, I highly recommend using them.

    Strike -N- Arc Welding LLC
    5.0
    from 3 reviews
    • 4 years in business
    • 2 hires on Thumbtack
    Gary B.
    Verified review

    We asked Sid to fabricate 16 metal pieces for us and to then come to our location and weld them to an existing structure. He arrived right on time to meet me and together with his Dad, had everything welded and primed within an hour and a half. We couldn't be more pleased.

    Wolfcreek Iron And Glass
    5.0
    from 2 reviews
    • 2 hires on Thumbtack
    Kathy C.
    Verified review

    We had a couple of metal lawn chairs that the tabs came loose. Wolfcreek was able to get us in the afternoon I called and made the repair while we waited. Super friendly too. Thanks Wolfcreek

    • 4 years in business
    JD G.
    Verified review

    I needed very specific custom project on a Porsche 911. after visiting with 4 different shops ,I did not feel comfortable with their levels of expertise on till I found GTZ Welding. there were very professional their level of expertise were great and willing to take on new challenges. I would highly recommend this shop GTZ to anybody their professional they handle projects in a timely matter. great metal fabrications. ask for Edgar Gutierrez he took care of me

    • 2 years in business
    • 5 hires on Thumbtack
    Joel .
    Verified review

    Needed to have my bbq pit firebox door hinges replaced and the door remounted. This is a 600-700lb pit so moving it is challenging. Transporting it is even worse. Local manufacturer said they would repair it, but that we had to deliver to and pick it up after repairs. I can't just "rent a trailer and tow it" LOL, so that would mean hiring movers to transport it there and then pay them to bring it back after I pay for the repairs at the manufacturer. So contacted Marc and was he available, efficient, professional, reasonably priced and the work was great. He was in and out quickly, brought all his own gear, cleaned up after, fabricated a bit and all was good. All that said, no more makeshift firebox door and all is right in the my world of backyard Q. Would hire Marc again and recommend him.

    Patriot Metal Arts
    5.0
    from 1 review
    • 7 years in business
    • 4 hires on Thumbtack
    Most. Rev. Anthony P.
    Verified review

    Your work is personable, professional, powerful, and true craftsmanship! Can't imagine letting anyone else do my signage and metal projects.

    Ferguson Fabrication
    5.0
    from 1 review
    • 1 hire on Thumbtack
    Jake G.
    Verified review

    I had some warehouse racks that I needed to be welded together and I was on a time crunch. Forrest got back to my request very quickly. He and his son showed up when they said they would and gave me a quote and got started the same day. They finished the job quickly doing quality work and were very friendly and professional.

    • 6 years in business
    About

    Honesty, integrity, attention to detail, experience in numerous aspects of welding and custom fabrication. American welding society certified for piping and structural welding.

    About

    I do structural welding of anything, from pipe to square tubing, etc. I fabricate gates, guard rails, window guards and horse pens.

    About

    Based in Austin, Texas, The Magic Anvil is a family owned and operated business. The Magic Anvil was started by Maged El Sariakoussy and grew out of his desire to spread the beauty of hand-forged metal art to everyone that appreciated it. Maged strongly believes in providing his customers with quality, one of a kind hand forged pieces of art. Whether he's making a custom table, railing, stairs (including spiral), trellis, arch, gate, chair, bed, table, knife,cross, sconce, barbecue smoker, or one of a kind decorative piece of art, Maged gives each project the same level of high quality workmanship.

    About

    A&G Welding has been in business in the same location for over 30 years, specializing in steel fabrication and repair. We also offer aluminum and stainless steel welding as well as repair on cast and other alloys. We offer highly competitive rates, with no minimum hourly charges like many other welding services. No job is too small.

    • 11 years in business
    About

    No job is too small. From wood and trash removal to fencing, we do it all. We give free estimates. We also haul off and do welding. Just ask us for an unfinished work, and we'll complete it.

    About

    Loves Oddjobs has 4 years experience providing quality work in many variations within the trade of welding. we have the tools and hard work to get the job done.

    About

    High fences 8 ft & low fences & mobil welding & water pipes lines, door fences, metal buldings, bud wire fences,

    About

    Certified welding, metal arts, decorative, structural

    About

    We do metal work, as it pertains to: * planters * indoor and outdoor furniture * water features * shade structures * railing * gates * fire pits * screens * shelving and shelf brackets * signage and letters * birdbaths * fabrication and repair of parts and components

    Q & A

    Answers to commonly asked questions from the experts on Thumbtack.

    How many types of welding are there?

    Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

    • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
    • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
    • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
    • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
    • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

    How long is welding training?

    Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

    Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

    Where can I take welding classes?

    Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

    How much is welding training?

    The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

    Actual Requests

    See other requests for sheet metal fabricators in New Braunfels

    Need Metalwork

    San Antonio, TX

    • Services needed
      Welding
    • Metal type
      Wrought iron
    • Details
      I need three small chairs made which I have a picture of if I can get an email address I can send for a quote. I also have the chair if you would like to see it.
    Hire skilled professionals for absolutely everything.