Winchester, VA20 Welders near you

Where do you need the welder?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Winchester Welders

Browse these welders with great ratings from Thumbtack customers in Winchester.

Fords Fabrications LLC
from 8 reviews
  • 5 years in business
  • 18 hires on Thumbtack
Sonny S.
Verified review

Very good. Responded to request quickly . Sounded knowledgeable , asked questions about job . Did a great job welding frame parts. Was willing to come to my house for such a small job. Very good , would recommend him to others and use his service again.

Eric Williams
from 7 reviews
  • 10 hires on Thumbtack
Thomas D.
Verified review

He is really friendly, fast, courtesy, and outstanding work. My exhaust was horrible, loud and annoying. Very quite and the welding job is very impressive. Highly recommend. Would give him more stars if we were allowed. Went above and beyond to make sure it was really good.

  • 5 years in business
John Snyder
Verified review

Professional work at affordable prices. Skilled welding and quality fabrication with dependable, knowledgeable service.

Jordan Bowling
from 3 reviews
  • 3 years in business
  • 1 hire on Thumbtack
Simon K.
Verified review

I wanted to reposition the factory wheel fender on my trailer which required welding it in a new location. He did a GREAT job on it, with clean and thorough welds that look better than the original. The welds are strong enough to hold my weight up, whereas the factory welds weren't. Completely happy with Jordan's work.

  • 4 hires on Thumbtack
Dan D.
Verified review

Great attention to detail and getting he job done right.

from 1 review
  • 1 hire on Thumbtack
John L.
Verified review

Had to weld a fender back onto my aluminum horse trailer. Rick showed up on time, knew what he was doing and did a great job. He even put the tire back on for me when I had to leave! I would recommend Rick without hesitation.


I offer the following: 1. Welding 2. Decks 3. Fence (wood and metal) 4. Siding 5. Lawn care and landscaping 6. Patios and side walk We are here to help you with your home repair!


I offer mobile welding and mobile repairs. I am an AWS and ASME certified. I have 15 years of experience. Mobile cutting is also available.

  • 18 years in business
  • 1 hire on Thumbtack

We provide excellent value for our welding services that are 100% guaranteed by our certified welder. Timley responses to all inquiries no matter how big or small.

  • 33 years in business

Description For over 25 years, Ken's Welding Service has been offering the most reliable and high-quality manual welding and manufacturing services in the Catlett area. We are proud to be recognized as one of the area's absolute best. We specialize and work with machine shops, sheet metal companies, solar and semiconductors systems as well as engineering corporations. In addition, we also offer on-site services for small- to medium-sized construction projects, as well as maintenance at utility company sites. Slogan Our goal is perfection with on-time delivery! Quality is our number-one commitment, and we take pride in the craftsmanship of our work. Our over a decade of experience has led to many referrals, and even with all our success, our efforts to be the absolute best haven't let up one bit. Call today! Address We are located at 8534 Burwell Rd., Catlett, VA, 20119. Products We have metal, steel, aluminum, iron, and piping. The services we offer are the following: * Welding and Fabricating Services * Heavy Equipment Repair * Plant Maintenance * Pipeline Services * Conveyor Systems * Container Repair * Handrail Welding * Structural Steel Welding * Steel Erection * TIG Welding * MIG Steel * Electrode Welding * Orbital Welding * Flux Cored Arc Welding * Silver Brazing * Soldering * Plasma Cutting * Conventional Machining * Mobile Welding Services * Manufacturing * Estimates * Consultations Our specialties are stainless steel, aluminum, copper, tubular frames, plate weldment, stick welding, tubes, pipes, high-tensile steel, and titanium. Payment methods accepted are MasterCard, Visa, American Express, Discover Card, personal checks, cashier's checks, and cash only. We were established in 1985. Our hours of operation are the following: * Monday: 08:00 AM to 05:00 PM * Tuesday: 08:00 AM to 05:00 PM * Wednesday: 08:00 AM to 05:00 PM * Thursday: 08:00 AM to 05:00 PM * Friday: 08:00 AM to 05:00 PM We are closed on Saturdays and Sundays.

  • 4 years in business

Our objective is to provide customers with superior-quality equipment at reasonable costs and at such a level that their expectations are exceeded. We are providing timely individual support and being in tune with customers' needs. If interested, e-mail us for a quote.


We at Burdette Ironworks, forge and fabricate art for your home or business, with the intent to provide both aesthetic and functional values. The artist, Kyle Burdette, constantly innovates to create new effects and designs through the use of items such as copper, steel, stone and wood. We are members of NOMMA, ABANA and the Tuscarora chamber of commerce. We also offer all forms of welding repair and fabrication. We are looking forward to hearing from you!


I'm a construction helper, mover, delivery driver and welder. I can also do landscaping, gutter cleaning, snow removal, forklift and prep cooking. I had some college vocational course. I learned a lot of many skills.


We specialize in ornamental, steel, aluminum, stainless, brass, repair or new. We provide complete portable services as well as full fabrication shop. We are also specializing in custom stairs and rails. Walk-ins are welcome, we weld on everything from lawn mowers to water towers.


I'm doing inventions for computer use. I do ultrasonic inspections of welds, metals, and airplane frames via OSHA standards. I do welding at construction sites and do tree work at homes where a big tree may be a current hazard to the house or to children in the area.


I provide custom steel fabrication and welding services for both commercial and residential applications. I do structural steel, rails and stairs, repairs, modifications, and also steel sales. I am a mobile welding service.


I offer quality structural and ornamental iron work, railings, and more, from basic to high-end work baluster replacements. No job is too big or small.

  • 8 years in business
  • 1 hire on Thumbtack

we never leave a job unfinished we will come to your site 24/7 we will always answer the call and never have an excuse


I been welding and metal work for 25 years and take great pride in my work.


I'm a welder by trade, mainly stick welding, but I am always looking for side work. It's best if I can meet to pick what you need welded up, or you bring it to me until I get a new machine that runs off a generator.

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

How many types of welding are there?

Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

  • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
  • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
  • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
  • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
  • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

How long is welding training?

Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

Where can I take welding classes?

Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

How much is welding training?

The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

Hire skilled professionals for absolutely everything.