Dream Kitchens of Brevard L.L.C.

Introduction: Dream Kitchens of Brevard L.L.C. Tired of the sticker shock from the big box stores and the Half off of what? price from the cabinet stores? Give us a call Dream Kitchens of Brevard. I am tired of this industry taking advantage of people. I only offer Solid wood Cabinets, Dove Tail construction, and Soft Close draws because I believe in a quality product. That being said I will beat the price of those so called "Half off of what? people" and give you better quality than the big box guys. I will work with the DIYer You can send me measurements from another place and I can price them, or take your own measurements. Here is how: 1. Make a rough drawing of the shape of the room. Represent each wall, door, and window. 2. Measure from the floor to the ceiling. 3. Measure each wall section and record on the drawing. (A wall section is from one corner to a door way or window.) 4. Measure each door and window; don't forget Indicate on your sketch how each door swings. NOTE: windows and doors are measured from outside edge to outside edge of casing or trim. 5. Mark the locations of where the appliances will go, be sure to record the dimensions of each appliance. Start by measuring the Width, Height, and Depth. 6. Mark on your sketch, the exact location of the sink, water & gas lines. Be sure to measure to the center of these & not the edge. 7. Add up all dimensions on each wall and verify that the total is equal to the total wall dimension listed on the chart. (If not, re-measure!) Double check your work. These measurements must be correct for your new cabinetry to fit correctly. If you want me to take care of it all I am able to do same day removal and Installation and I offer free in home consultations, Give us a call The look on a customers face when they see that We save them thousands on their cabinets. without sacrificing Quality.