San Marcos, CA24 Aluminum Tig Welders near you

Where do you need the aluminum tig welder?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

San Marcos Aluminum Tig Welders

Browse these aluminum tig welders with great ratings from Thumbtack customers in San Marcos.

  • 13 years in business
  • 149 hires on Thumbtack
Jack H.
Verified review

Chadd came out to demolish a section of fence that had rotted out and rebuild it. He came to work on time (when he said he would. Brought all the tools and wood he needed for the job. Finished in record time and did an excellent job. Would hire again.

O'Meara Handyman Services
4.9
from 69 reviews
  • 38 years in business
  • 98 hires on Thumbtack
Carolyn K.
Verified review

Sean was a pleasure to work with. He was prompt, highly skilled, worked quickly and best of all-- had a great attitude! I recommend him for any task you might have-- electrical, plumbing, carpentry, etc. He also has a great eye, assisting with hanging 30+ pieces of valuable artwork. Reasonable and professional! Carolyn / Scripps Ranch

Mike Bell's Welding
4.9
from 25 reviews
  • 31 hires on Thumbtack
Vanessa R.
Verified review

Mike welded casters to 11 shelving units. He showed up early, was very friendly and professional. He asked questions to make sure we were getting what we wanted. He even added on extra service and kept his pricing very reasonable. I would definitely recommend him for any general welding job, and will be using him again if we need other welding services done.

JK Services
4.4
from 24 reviews
  • 8 years in business
  • 26 hires on Thumbtack
Elizabeth C.
Verified review

John has been my handyman for years. He has worked on countless projects, painting, honey-do lists, laying new sod, you name it he has done it. I have found him to be honest, reliable, very easy to work with, upfront about costs, very reasonably priced and super knowledgeable. This review has been a long time coming but last night he went above and beyond. Last night I walked into the kitchen and there was water everywhere! I call John at 11:30pm and he was at my house within 30 minutes even though his son was not feeling well. He fixed a broken pipe under the sink thank God he had the parts with him to solder the pipe back together and then he cleaned up the huge mess for me. To top it off he charged his regular rate, not extra because it was after hours. Thank you!!

Fabrication Solutions
5.0
from 12 reviews
  • 5 years in business
  • 25 hires on Thumbtack
Richard W.
Verified review

Great work, quick reasonable..... Repair of steel gate that rusted

Continental Custom Iron
4.3
from 7 reviews
  • 8 years in business
  • 7 hires on Thumbtack
Peter F.
Verified review

CCIron worked with me to create a contemporary interior stair railing. Work was done in a timely manner and looks great. I definitely recommend CCIron for metal work

  • 1 hire on Thumbtack
Ness R.
Verified review

Daniel was very professional and helpful when I was requesting a quote. He understood what I wanted and gave me a very reasonable quote compared to others. His welding beads looked amazing. Will definitely be contacting him whenever I need more work done. Thank you!

SoCal Mobile Welding
5.0
from 4 reviews
    Gabe C.
    Verified review

    Victor has done a great job for me on many projects from fabricating custom installs to simple iron repairs. He has a creative mind to help you through your project and make sure you get what you want. He is a great welder and craftsmen.

    DelTiempo Home Improvements
    5.0
    from 3 reviews
    • 5 years in business
    • 1 hire on Thumbtack
    Larry L.
    Verified review

    Jaime fabricated a custom gate and hinges for me and I couldn't be happier with the results. His welds are perfect and I would recommend him for any fabrication or metal work job.

    J&C mobile welding
    5.0
    from 2 reviews
    • 3 years in business
    • 5 hires on Thumbtack
    Ed I.
    Verified review

    Hired Chris to replace welded-in-place metal hinges on a gate. Chris and his wife (who is also a welder) did the work. Chris was very professional from the first text message forward. Showed up on time, did great work and made sure I liked it. They can tackle much more complex projects than this.

    Wanda S.
    Verified review

    Andy has done alot of welding work for me and it has always been very good. He is responsive to my phone calls for service and I have never had any problem with the work he has done for me. I would definitely recommend him and would use him again when I need welding work done in the future.

    John's Welding
    5.0
    from 1 review
    • 1 hire on Thumbtack
    Justin B.
    Verified review

    John did a great job on short notice and came out to our construction site to weld brackets to HW beams. His work is clean and detailed which is very important in the construction industry.

    Berkley Welding Inc.
    5.0
    from 1 review
    • 2 years in business
    Peter D.
    Verified review

    Bill is one of the best welder I know, He always has a great attitude and gets the job done ahead of schedule and does a bang up job...

    Shane's Fabrication
    5.0
    from 1 review
    • 2 hires on Thumbtack
    David B.
    Verified review

    We wanted to install a stainless steel backsplash in our newly remodeled kitchen, which had some very challenging surfaces left over from previous work. Other vendors quoted us outrageous prices, indicating to me that they really didn't want the job. I found Shane through the Thumbtack referral site, he called back almost right away. He measured the job with good accuracy on his first visit and quoted me a price as soon as he knew how much the material would cost. He hired Cal WaterJet do cut the material to his specifications, but before cutting the very expensive stainless steel sheet, a mock-up of masonite was cut for fit-testing. A few minor adjustments were required and the completed parts were cut. Shane did some onsite finish cutting to ensure an almost perfect fit. I suppose if I had any sort of complaint at all it would be that he often doesn't answer his phone. But neither do I, and we played a bit of phone tag. But the communication, although slow at times, was clear. Shane always seemed to understand exactly what I wanted, and the final result shows his attention to detail and his commitment to please the customer. Our kitchen is bright and beautiful thanks to Shane's hard work.

    About

    We are providers of quality and fast mobile welding services in the greater San Diego area. We can do it all, from large to small. We are using all the up-to-date and latest technologies to provide you the best level of service. Call San Diego Mobile Welding for quality welding that you can trust.

    About

    I offer the following services: *Mig welding *Stick welding *Galvanized welding *Flux core welding *Ceramic tape welding *Air arc and sub arc welding *Koike welding *Shipyard worker and sheet metal worker

    About

    As a welder with 9 years experience, i take great pride in the quality of my work. My number one goal with every client is to exceed their expectations and ensure total satisfaction from job start to finish.

    About

    I have been a MIG welder for ten years and can fix, repair, make or invent any custom iron work needed. My main goal is always customer satisfaction.

    About

    We provide general welding shop or field custom fabrication, structural steel fabrication, and building erection quality jobs in stainless steel and aluminium gates, handrails, fences, trellis and custom-architecture work. We have good reference of clients satisfied. We are certified welders (A.W.S 7018 and NR 232 A.S.M.E). We handle A.I.S.C workman like manner according to industry practices standards.

    • 22 years in business
    • 1 hire on Thumbtack
    About

    This professional is a local welder who has more than 19 years of experience. Tim Richards is one of the pros who will provide aluminum TIG welding services. He is always available for your needs.

    About

    I'm a welder who goes to his customers. Also, I can get work done from home. I can custom-made anything. I also do repairs as long as it is A36 (regular metal) stainless and aluminum.

    About

    I do construction and welding of solar and thermohydraulic systems. I also do repairs of boilers and tubes under water pressure.

    • 3 years in business
    About

    Want an expert who can provide aluminum MIG welding services? Aufheben offers pipe welding and custom metal fabrications. Check out their rave comments online.

    About

    Need reliable TIG welders? Get the services of Design Solution & Machining. They also handle plasma cutting, boldering, and many others.

    Actual Requests

    See other requests for aluminum tig welders in San Marcos

    Need a Welder

    Escondido, CA

    • Welding type
      Arc
    • Project type
      Automotive
    • Work location
      Outdoors
    • Details
      Yes, I plan to tow my small suv behind a R.V and have purchased a tiw bar, but I fin that to di this the reciever brackets need welding to the frame. So I imagine you like others are a busy man, but would greatly aporeciate your help. Im 67 so I cant get under the truck to do this by myself, but after seeing most welders are busy with larger, better paying jobs as to not consider my request. I can pay you on the spot cash when the job is done. Call my cell. Loik the job and parts over and quote me please. I live down by El Norte and Washington almost down by where El Nirte meets Valley Parkway. Im available early am or late pm, please sir.
    • $125
      Average price
    Hire skilled professionals for absolutely everything.