6. BMT Builders
- 25 years in business
- 3 hires on Thumbtack
- Serves Stockton, CA
"The project involved converting the lowest level of a tri-level home to a separate living quarters for my daughter. The bedroom, bathroom and utility room were left intact. The primary effort consisted of: closing off the open space between the main kitchen eating area and the large family room; providing a separate entrance to the family room; replacing an 8 foot window with a sliding door, landing, and steps from the eating nook; removing a wet bar, and adding a kitchenette in the family room. The kitchenette required installing: cabinets; appliances; electrical and plumbing; lighting fixtures; quartz counters; tile flooring.
George Smith, owner of BMT Builders, was an integral partner of the design process, which included the home owners and a Kitchen Design specialist. George's expert experience in this process resulted in many practical improvements to the design and physical layout of the kitchen. He provided the detailed plans for the permit, and advocated for the home owners interests with the county personnel- which was critical in obtaining approval of the project. The care and dedication to the job which George and his assistants provided were commendable, they worked exclusively on this project until it was completed. The craftsmanship of the finished product adequately reflected George's perfectionist nature. His integrity was above reproach; his word was as good as gold in all aspects of this project.
There were many unforeseen obstacles encountered during the project; George always provided the owner with a menu of options, explanation of the choices, and any cost ramifications. He included any suggestions offered by the owner in his recommended solution. His suggested approach was both pragmatic and artistic; but, always focused on getting the effort done the correct way- never cutting corners.
As with any project of this complexity, some surprises arose; the most significant one involving relatively new code issues, which were not included in the initial plans. The electrical wiring for the new appliances and kitchen outlets originally were planned using the existing 200 amp panel. At the initial site inspection, the county agent informed us of additional code requirements that would necessitate installing a new main panel and running new electrical circuits from this panel to the new kitchenette. This change in approach had a modest impact on the schedule and cost of the project. In retrospect, this could have been mitigated by more detailed review during the permit process."