Ashburn, VA44 Sheet Metal Fabricators near you

Where do you need the sheet metal fabricator?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Sheet Metal Fabricators Close to You

Thumbtack helps thousands of people asking, ”How do I connect with the best sheet metal fabricators in my area?” We offer free custom quotes from sheet metal fabricators near you, ready to complete your metalwork project. With the added protection of our Thumbtack Guarantee, you can hire nearby pros with confidence.

Sheet Metal Fabricators Close to You

Top Rated Sheet Metal Fabricators Around Ashburn, VA

Top Pro
Tim's Assembly Service
4.8
from 194 reviews
  • 4 years in business
  • 307 hires on Thumbtack
  • Top Pro on Thumbtack
Mahlet T.
Verified review

Bathroom door made of metal was jamming and would not close. Tim discussed various options with us and went with the one we felt more comfortable with. He was very professional, patient, friendly and did an excellent job. He even helped us out with another door problem, which we brought up after he got to our place.

TnT
5.0
from 28 reviews
  • 7 years in business
  • 33 hires on Thumbtack
Emmy E.
Verified review

Tyrone came out on short notice to help with a metal project for our window. He did a good job. Was professional, nice, good workmanship and priced right. We would hire him again. You should too!

Top Pro
  • 11 hires on Thumbtack
  • Top Pro on Thumbtack
Victor G.
Verified review

Very satisfied with its professional working and the quality of his work. David arrived on time, welded my railing exactly as we discussed it. Polished it. And even had black painting spray to paint it back. Great job, of great quality and on time. David was very polite, and professional. I highly recommend him. Thanks, Victor.

About

I can custom build mantles and install custom moulding. I can repair any wood work. I can build and install cabinets. I stick and mig weld black or red steel. Weld fences, gates , BBQ pits, toolboxes, bumpers etc.

About

We offer full-service welding and metal fabrication. We do TIG, MIG and stick welding in shop and mobile service. We are specializing in stainless and aluminum welding and fabrication.

About

Because it's 'reasonably cheap and we do good work

  • 14 years in business
About

My services include the following: * marble and granite fabrication and installation * kitchen and bath specialist * ceramic tile work * carpentry (general) painting * concrete * plumbing * AC * stone * metal welding, etc.

About

I'm a custom cutlery, blacksmith and metal worker. I mostly work in high-art, custom-usable knives, including Damascus and Wootz steels.

About

We offer welding and fabrication services including mechanical piping systems, pipe welding, aluminum welding, stainless steel welding and complete fabrication services.

  • 42 years in business
About

Creative Metal Design is specializing in the following: * Custom business signage * Custom handmade metalwork for interior or exterior: gates, railings, window grills, balconies and other architectural fabrications * Metal furniture: beds, table bases, chairs, plant holders, etc. * Metal art: have your design fabricated or choose from an array of one-of-a-kind metal sculptures In an age when mass production is the norm and the average product life is 3-5 years, there is a craftsman whose work is built to last a lifetime. Pete Markey, owner of Creative Metal Design, is an artist who creates on a canvas of iron. Using the hammer in place of the brush, he paints three-dimensional works of art that are functional as well as beautiful. Pete is a graduate of Turley Forge in Santa Fe, New Mexico, where he mastered the time-honored, traditional method of shaping metal with hammer and anvil. His expertise ranges from faithful reproductions to his own highly original designs, and his skill with a variety of metals enables him to express many moods and effects. He specializes in custom-built one-of-a-kind pieces, which interpret the visions of individuals who search for the truly distinctive and unique. Handcrafted from start to finish, Pete's metal designs represent a creative approach to practicality and visual pleasure. Their quality and beauty make them architectural treasures to be used and appreciated for generations.

Angel Bryant
5.0
from 3 reviews
    Steven B.
    Verified review

    Angel Bryant certified welder has been performing steel erection and fabrication welding services for my firm, Steven K Broyles & Associates Engineers & Contractors for 10 years. The work is outstanding prompt and at a reasonable price Steven K Broyles PE. If you have any questions or need more information call me at 410-747-5500

    Randy F.
    Verified review

    Kraftwerks repaired our standing seam tin roof and rebuilt and restored the slate roof on our 1840s spring house. They did a great job! The work was done in a timely fashion and the site thoroughly cleaned up once the project was finished. We highly recommend Kraftwerks!

    About

    I engineer, erect, and fabricate custom and industrial chassis and support structures. Having extensive knowledge in metallurgy, I have a passion to engineer what people desire but do not have the skill required to perform fabricating processes.

    Valle Remodeling Inc.
    5.0
    from 24 reviews
    • 12 years in business
    • 18 hires on Thumbtack
    David K.
    Verified review

    the guys from Valle Remodeling showed up on time and did an excellent job installing the Fire Proof door. They came prepared and did exactly what they said they would do. Within 2 hours, they removed the existing door and metal frame and installed the new door. Before leaving they cleaned up the area - leaving it in better condition. Hats off to these kind gentlemen for a job well-done!

    About

    J.W. Welding & Fabrication, mobile and shop services. We create farm, truck, guardrail and more. Residential and industrial.

    About

    I been welding and metal work for 25 years and take great pride in my work.

    About

    More of 25 years on welding and fabrication.We have the most competitive team on home improvement and general contracting.

    About

    We're a full-service sign company -- designing, fabricating, installing and servicing signs. We do commercial, electrical and architectural signs for stadiums, hotels, hospitals, office buildings, restaurants, retail locations, parking garages and transportation sites. Our services include permitting, conceptual design, engineering, prototyping, brand management, fulfillment, project management and on-site services. Gelberg has been producing quality signs and services since 1941 from our 40,000-square-foot manufacturing plant.

    • 24 years in business
    • 12 hires on Thumbtack
    Frank L.
    Verified review

    Tough job working with cast metal but they did it perfectly and on time

    About

    I am a welder, fabricator and designer based out of West Virginia. I have years of experience in metal fabrication. From automotive to furniture, I offer a broad spectrum of capabilities.

    About

    Services are the following: * Sheet metal -- HVAC/ductwork * Skylights * Custom fabrication * Erection services * Installation services * Exhaust systems * Chutes * Tanks * Stacks * Conveyers * Fabricate and refurbish elevator cabs and interiors * Architectural and ornamental sheet metal fabrication * Welding services * PVC systems * Stainless steel * Specialty alloys * Hoppers * Roofing -- built-up, single ply, slate, tile, metal

    Q & A

    Answers to commonly asked questions from the experts on Thumbtack.

    How many types of welding are there?

    Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

    • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
    • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
    • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
    • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
    • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

    How long is welding training?

    Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

    Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

    Where can I take welding classes?

    Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

    How much is welding training?

    The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.