Bayonne, NJ76 Sheet Metal Fabricators near you

Where do you need the sheet metal fabricator?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Bayonne Sheet Metal Fabricators

Browse these sheet metal fabricators with great ratings from Thumbtack customers in Bayonne.

Lightspeed Welding
4.5
from 36 reviews
  • 4 years in business
  • 44 hires on Thumbtack
Robert M.
Verified review

Very good experience with Matthew. - Would recommend him for future metal projects.

A.C. Custom Welding
5.0
from 25 reviews
  • 11 years in business
  • 30 hires on Thumbtack
Julian R.
Verified review

Two challenging furniture jobs, that I am very happy with, excellent communication keeping me involved at different stages. The first a 115 inch long metal frame table that had to go up to a second floor apartment, Jeff came up with a solution and executes a perfect job to provide a way to detach and re-assemble the two parts. The second was to encase large slabs of rock into a bed footboard, Jeff again had a good grasp of the aesthetics, the piece weighed about 400 LBs and once again a perfect job of detaching metal rods and re-building the piece in way that no one would ever know it was damaged.

  • 5 years in business
  • 1 hire on Thumbtack
Mike G.
Verified review

This company was by far was the most pleasant and professional experience since I bought my house. Mohamed and his crew were so professional and polite. They are great on communication and they were able to answer all my questions in a timely manner. They installed 130 feet Of metal railing around my house and poder coted. My fence looks amazing and couldn’t be happier. I highly recommend moe and his crew

Mahoney's Metal Fabrication
5.0
from 2 reviews
  • 3 years in business
  • 4 hires on Thumbtack
Brendan K.
Verified review

Very prompt, responsive and rates are very reasonable. Very high quality work, will be recommending and reusing in the future. Also was able to get it done on very short notice. Overall, great experience- working with Joe was a breeze and I look forward to using him again for future projects.

Andrea W.
Verified review

I called Lewis-Hasenfeld because I wanted to spruce up my Manhattan apartment, from the very beginning they (Christian Lewis) were incredibly helpful and sensitive to my needs. I have a very small apartment and needed some help with not just decor but also making the little space I have effective. They started by compartmentalizing the closets then went from there. They then designed and fabricated a gorgeous glass and metal shelving unit and matching dining table for me which I was able to afford because they helped me pick out the rest of my furniture on Craigslist and saved me an huge amount of money while still purchasing some wonderful pieces for me (including some wonderful original artwork for the walls). Christian was great at working together with me and from picking colors to hanging the artwork I really felt that it was an honest collaboration. Within 2 weeks my apartment was organized, more spacious and had an actual continuity in regards to theme. I would highly recommend Lewis-Hasenfeld to anyone considering re-doing the interior of there space, they are a pleasure to work with, my friends are all amazed at the transformation and when I tell them how much it cost me they really can't believe it.

  • 6 years in business
  • 2 hires on Thumbtack
Kin W.
Verified review

Working Frederick was absolutely easy and would highly recommend his services! Great communication and the end result will outlast my grandkids!

About

I am a great welder and metal worker in general. If you're looking to build something artistic or structural, I will be more than happy to assist you.

About

I do metal fabrication and repairs. No job is too small. I will travel and do welding repairs on site. I will also help come up with designs and ideas. I went to welding school, and ever since, I have been passionate about the trade.

About

We custom cut, bend and weld all sheet metal from 26 ga up to 12 ga. We do the following: * Galvanized sheets * Carbon sheets * Aluminum sheets * Copper sheets * Brass and bronze sheets We also fabricate custom duct work for A/C and heating units. We do all kinds of welding, including the following: * Stick * Meg * Tig * Spot welding

About

We are a steel fabricator specializing in structural and miscellaneous metals. We offer a wide variety of products such as custom metal rails, fire escapes, windows guards, overhead doors, and specialty metals such as stainless steel, aluminum, and bronze.

About

We are welders/fabricators skilled in GTAW, SMAW, and GMAW. We are able to take care of all your welding jobs whether it be from your smallest repair to your most intricate custom piece.

About

We are a metal roofing company that is specialized in metal roofing in the state of New Jersey, servicing all parts of NJ.

About

We are formally educated and certified welders with 31 years of practical experience in our trade, as well as an advanced education in metallurgical sciences. Based on that education and experience, we have provided our services to customers in all types of businesses throughout our working area. After becoming familiar with our business ethics, our work and results, and our willingness to accommodate their needs, customers know without a doubt that they can rely on us and trust us to give them the stellar results they are looking for.

About

We offer fabrication and installation of custom ornamental and miscellaneous metal work in steel, aluminum, stainless and bronze.

About

Testing and troubleshooting within electronic systems and components are offered. The following are offered: * Forklift operation and all pallet moving equipment * Metal fabrication (machinist) * Plumbing and drains * PLC testing and troubleshooting * Electronics panel building experience * In-shop electric wiring * Small carpentry repairs * Map reading and delivery skills

About

I do welding and fabricating of all types of metal working. I also do ornamental, sheet metal, structural and custom fabricating.

About

I'm an experienced welding and machine shop fabricator who is just getting out of school, but is very talented in what he does.

About

We pick up any unwanted metals, including any cars, furnaces, hot water tanks, trucks, oil tanks, etc.

  • 32 years in business
About

I am a fabricator and a welder who has 30 years of experience. I also have a diversified range of experience and have worked on projects in many different metals and welding processes.

About

An industry leader, Aero Manufacturing has been specializing in the manufacture of stainless steel sinks, tables, shelving, dish tables, cabinets, as well as custom solutions for different environments. With a reputation for the fastest lead times, cutting-edge manufacturing techniques, and a comprehensive environmental policy, Aero Manufacturing provides true reliability and quality you can count on.

  • 19 years in business
About

We fabricate ducts for air conditioning and heating systems. We custom cut and bend all sheet metal from .026 to 1.25 mm thick, steel #4, aluminum (all collars), and carbon steel. We also do TIG, MIG, stick, and spot welding.

Hire skilled professionals for absolutely everything.