Lansdale, PA55 Sheet Metal Fabricators near you

Where do you need the sheet metal fabricator?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Lansdale Sheet Metal Fabricators

Browse these sheet metal fabricators with great ratings from Thumbtack customers in Lansdale.

Top Pro
  • 5 years in business
  • 33 hires on Thumbtack
  • Top Pro on Thumbtack
Jerry C.
Verified review

Ive been looking for someone to do metal work for me for some time. I have googled and no one online offers small jobs. Then I remember a friend of mine recommended thumbtack to me so I searched for someone and found Dan. Dan contacted me and I gave him a brief description of what I had wanted done. I only had 1 picture and the picture was not the best, however, he did a great job with my paper tray rack. The job was to weld 3-4 paper trays on a sideways diagonal stance on a piece of metal with 1 above the other. He was very communicative with me. He showed me a picture before he would weld it and asked me to make any changes if needed. If I wanted to space the trays out a little more or if I wanted to add the 4th tray, and if I did it would be this certain height. If I didn't he can continue with the job. If he added the 4th tray, the cost would not increase. Honestly, Dan is a great person to work with. He even asked me why don't I just buy something to hold these trays up. I searched and couldn't find what I wanted. It was the fact that he did not push me to hire him even at the meet up to give him the trays. He gave me options tip the end. That shows the type of person Dan is. I hope to have future projects for him to do and he will be the first person I contact for any metal work, as you should, too. The best part was that he lived close enough to save me shipping it to him. NJ has cheaper gas than Philly so the drive made up for the shipping for me. The paper tray rack came out great, thanks again.

Bulletproof Welding
4.6
from 32 reviews
  • 43 hires on Thumbtack
Neil Y.
Verified review

Neiko was quick with communications and showed a thorough understanding & love of the craft. My porch wrought iron has a completely updated & custom look (and structural stability) thanks to him. I would easily recommend for any metal work.

KMS Welding
5.0
from 16 reviews
  • 18 hires on Thumbtack
Shanita W.
Verified review

Ken response was prompt and he repaired our metal handrail the same day he came out to assess. The quality was excellent and the price was reasonable. We are very pleased Ken’s workmanship and professionalism. We’d definitely use his services again.

  • 4 years in business
  • 1 hire on Thumbtack
Cody K.
Verified review

It has been a privilege to know Ray, the owner of RGS Welding & Fabrication, these past 14 years. Yes, before he even started RGS Welding & Fabrication. Over those years he has worked on several jobs for me. All of which were done in a very timely manner with NO deviation from quality what so ever! Over these years i have come to use his welds as a basis for comparison as to what good welds should look like. I have seen him weld on carbon steels, stainless steels, aluminum, and titanium. Let me tell you, i always thought his TIG welds looked beautiful to begin with but seeing his TIG welds on titanium took it to a new level. The man knows what he is doing, has a great business sense, is down to earth, and an all around good guy! He is without a doubt my go to welder/fabricator. Thank you Ray for all the help over the years!

About

Scott's Metal Shop offers screen printing for any special occasion or just for fun! I am also a welder for the past 20 years with a lot of experience. I can fix or make anything for you! Check my eBay out and look for custom welder. Also, feel free to contact me by e-mail or telephone for any question.

About

Liquid Iron Industries specializes in very high-quality automotive fabrication services. We also do custom exhaust, headers, chassis fab, roll cages, sheet metal, welding, CNC cutting and bending, engine and transmission builds, etc. We also like to use our machinery for other purposes such as sign manufacturing, decorative artwork, commercial CNC jobs, fleet maintenance, repairs, etc.

About

Noonan Welding & Fabrication is a family owned business that takes great pride in their work. We specialize in all kinds of welding and carpentry. We do home renovations and custom furniture. Welding & Fabrication is not just a job it is a passion. We enjoy taking our time to be precise. Knowing we will be able to stand behind a quality hand crafted product.

About

About

I do welding and fabrications of all types of metals alloys. We MIG, TIG or stick weld structures and we do all types of repairs.

About

Testing and troubleshooting within electronic systems and components are offered. The following are offered: * Forklift operation and all pallet moving equipment * Metal fabrication (machinist) * Plumbing and drains * PLC testing and troubleshooting * Electronics panel building experience * In-shop electric wiring * Small carpentry repairs * Map reading and delivery skills

  • 6 years in business
About

I am a welder, fabricator, fitter and blacksmith. I can fix about anything, or I can create your idea. If it's broke, I can Fix-Zt. Follow me on Facebook.

  • 3 years in business
About

Fake Rose is all about accentuating what makes a piece of work stand out. I use my 10 plus years of metal working experience and collaboration with my clients, to figure out what could make a final product interesting and special. No matter if its a 20 foot balcony railing or a custom piece for a photo shoot, attention to detail is paramount.

About

" If it's made of metal, It's made for us!" xxxxxx Allways being able to rise to any challenge or task

About

We are formally educated and certified welders with 31 years of practical experience in our trade, as well as an advanced education in metallurgical sciences. Based on that education and experience, we have provided our services to customers in all types of businesses throughout our working area. After becoming familiar with our business ethics, our work and results, and our willingness to accommodate their needs, customers know without a doubt that they can rely on us and trust us to give them the stellar results they are looking for. Everything! We love what we do!

About

We do welding an custom fabrication on trailers,dump bodies,heavy equipment buckets,race cars an anything else you may need welded or fabricated. I enjoy building an fixing things..when a customer brings me a mess of a project an I build it or fix it, it's the smile on there face when they see the finished product that I enjoy the most..

About

Our experienced personnel is proficient in steel, stainless steel & aluminum. Other services we offer is laser cutting, shearing, pipe-fitting, punching, bending, grinding, drilling and press breaking. We can repair, install and fabricate to your needs. Fabricating to your design but exceeding your expectations. The smiles and comments make it worth it.

  • 1 hire on Thumbtack
About

I have been welding for over 30 years. I can weld/fabricate almost anything out of aluminum, stainless steel or steel. I have worked on everything from aircraft components to lawn mowers. I do metal art, and refurbish boats, cars, trailers, lawns, etc. I stand behind everything I do. No job is too small. I serve South Jersey. Give me a call.

About

We are a metal roofing company that is specialized in metal roofing in the state of New Jersey, servicing all parts of NJ.

  • 5 years in business
About

We are real people who understand you and what at a fair and respectable price is for a real person. That I can make people happy to do great work at a low cost no b/s price

  • 13 years in business
About

We do custom wood and metal work. We treat every job as if it were a million-dollar project and as if it were our own! Customer satisfaction is our main concern and pleasure!

About

We offer the following services: * Fabrication and installation of decorative and structural iron. * Aluminum, steel and stainless steel welding * Portable welding - including ALUMINUM!!! * Alloy rim repair The welders who speak in complete sentences!

Q & A

Answers to commonly asked questions from the experts on Thumbtack.

How long is welding training?

Because there are different paths to learning to weld, there’s no single timeline for welding training. Some people attend school part-time while working their current job, while others can focus full-time on their welding training courses. People interested in learning how to weld as a hobby can also take classes from professional welders, such as at KCMA & Services in Waterloo, Indiana.

Expect to take at least two years to go from welding newbie to American Welding Society Certified Welder. A junior college Certificate of Completion welding course is two semesters full-time, or 10 units of coursework. With this certificate, students are qualified for an apprenticeship or internship, rather than a full-time entry-level job. Welding apprenticeships range from 6,000 to 8,000 hours long, equalling three to four years at 2,000 hours per year. Some junior colleges, such as Cerritos College in the Los Angeles area, offer more in-depth welding programs that lead to different welding certifications, such as arc welding and tungsten gas arc welding. These take three to four semesters to complete, so you could be qualified for an entry-level job in about two years of full-time study. Alternatively, you can prepare for employment more quickly through an intensive vocational program at a trade school. For instance, Ohio’s Lincoln Electric Company offers a comprehensive program that prepares people for a welding career in just 20 weeks and 600 hours of hands-on instruction.

How much is welding training?

The cost of welding training depends on where you take your classes and how quickly you want to complete the program. In general, junior college welding classes are the least expensive, but may take longer; trade schools offer intensive classes that lead to certification more quickly, but are more expensive. For example, Cerritos College, a junior college in Los Angeles that offers a welding training course, charges an average of $46 per unit; most of their welding certificate programs require 19 units of coursework, so cost about $875 each to complete. Pro-Weld, an on-site welding school in Idaho, offers three different welding courses. The 36-week welder fabrication and the 24-week gas tungsten arc welding courses each cost an average of $3,300, while pipe welding costs an average of $2,500 for a 24-week session or an average of $4,500 for a 52-week session. The 20-week comprehensive program at the Lincoln Electric Company in Ohio costs an average of $9,500. Many programs require students to purchase approximately $120-$200 worth of personal welding equipment in addition to textbooks or other class material fees.

How many types of welding are there?

Welding is a method of fusing together two or more pieces of metal using electricity or flame. Welding is used to construct buildings, make metal sculptures, build and repair cars, make gates and furniture, and for many other practical and aesthetic uses. There are multiple types of welding. Here is an overview of the most popular methods:

  • Stick welding: Formally known as shielded metal arc welding, stick welding uses extreme heat applied at the seam of two separate metals to melt them together. A third (intermediary) metal may also be incorporated for added strength. As the metals cool, they are bonded together.
  • Metal inert gas (MIG) welding: Formally known as gas metal arc welding, MIG welding uses a tool to feed metal wire into the weld puddle while an electrical arc melts the wire, which will fuse to the base metal upon cooling.
  • Tungsten inert gas (TIG) welding: Formally referred to gas tungsten arc welding, TIG welding is a similar process MIG welding, but instead of using a tool that continuously feeds metal wire into the weld puddle, the welder must hold and manually feed the stick.
  • Gas welding: A mix of flammable gas and oxygen is used to heat metal to the melting point.
  • Forge welding: Forging metal is an ancient art that involves heating two pieces of metal until they are molten, then hammering them together.

Where can I take welding classes?

Your options for welding classes depend on where you live and whether you’re willing to travel. Many skilled professionals offer private or group welding classes across the U.S. Some high schools offer classes for teens, but many people learn from a private trainer or in a junior college or vocational school. Students learn basic welding, machining and fabrication processes, including using gas and arc welding equipment, and qualify for an apprenticeship or internship. Other colleges as well as vocational schools have two-year associate’s degree programs that prepare you to take the welding certification exam and seek full-time employment.

Hire skilled professionals for absolutely everything.