Bellaire, TX
58 CAD Designers near you
Where do you need the CAD Designer?

Answer a few questions

Tell us what you need so we can bring you the right pros.

Get quotes

Receive quotes from pros who meet your needs.

Hire the right pro

Compare quotes, message pros, and hire when ready.

Bellaire CAD Designers

Browse these CAD designers with great ratings from Thumbtack customers in Bellaire.

Top Pro
HDesign
5.0
from 15 reviews
  • 16 years in business
  • 48 hires on Thumbtack
  • Top pro on Thumbtack
Juliette L.
Verified review

I had gotten stuck on my CAD design and Corey was able to help me through it! Would definitely work with him again.

CAD Tech USA
5.0
from 7 reviews
  • 8 hires on Thumbtack
Anthony Y.
Verified review

First cad drawing was completed as we requested. Very detailed and quick response. High standards and quality work.

Zing MediaCo
5.0
from 7 reviews
  • 4 years in business
  • New on Thumbtack
Armando A.
Verified review

Attention to detail. Thoughtful design and content. Stellar customer service. Efficient results. Church banners and posters created by George were well executed, timely, and relevantly crafted for the event.

South Oak Studio, LLC
5.0
from 2 reviews
  • 6 years in business
  • 3 hires on Thumbtack
Hal S.
Verified review

He professional. He understand the construction and architecture business.

  • 20 years in business
  • New on Thumbtack
David H.
Verified review

It’s not always true that first impressions are lasting impressions, but in this case, as far as I’m concerned, my instincts were correct. I first met Joshua (founder of QT&CD) at the Music store he owned in town. I soon learned that he also owned several other businesses. His design of the storefront was very functional and included artwork that he created to match the store's theme. In addition to that, he installed the security system with good lines of sight for complete store coverage. In an earlier life, I had managed a large music store, so was doubly impressed with the amount of detail that had been taken into consideration towards creating effective displays, but at the same time considering the risks of being a store owner/manager. I tend to be impressed by thoroughness and attention to detail; and eventually I was able to have Joshua assist me with projects at our home. Over the course of several years, it has become obvious to me that Joshua is the consummate business professional while knowing that at the same time his passion is to deal effectively for the customer’s best interest.

  • New on Thumbtack
About

AgilexCADD is a premier CAD outsourcing company. We offer the services below to our clients: - 2D drafting - 3D modeling and visualization - animation and walkthrough - steel detailing

  • 3 years in business
  • New on Thumbtack
About

Make the clients feel like they make the right decision.

About

I am Bryan Theriot a 3D generalist who works with 3Ds Max and Maya. I have several years of experience working with the oil industry creating visualizations of various tools and equipment. I also have skills with graphic design in print using Adobe Photoshop and In-Design. If you are interested in seeing more of my works, please visit my portfolio.

  • New on Thumbtack
About

I am a Houston based multimedia artist. I specialize in, but is not limited to, 2D and 3D digital art. I have a bachelor's degree in my field of multimedia arts and animation from an accredited college. I produce some of the finest-quality artwork around.

  • New on Thumbtack
About

I design and detail product. I can design threads, mechanical parts and assemblies. No job is too big.

  • New on Thumbtack
About

I have a B.S. in Engineering Technology from Texas A&M and several years of experience with design engineering practices. I do Solidworks, AutoCAD, bill of materials, and component selection.

  • 3 years in business
  • New on Thumbtack
About

I am an engineering technologist. My services include the following: * Pipe Design * Skid Design * P&ID * As built * Feed Studies * Field Design * Plant 3D * Auto Cad * Smart Plant Design team member for the multi-million dollar plant c onstruction projects such as, Diesel Particulate in Midland, Michigan, Chlorine 7 in Freeport, Texas. ? Coordinated with all disciplines to support the piping plan an d design effort for the Chlorine 7 and DPF projects; interfaced with clients, project team, vendors , and other companies during the feasibility stage of the projects; developed associated drawings for equipment an d piping arrangement for MTO. ? Responsible for status reporting, client communication & coordinating with the project management team for timely completion and quality maintenance of projects ? Prepared designs and drawings using project specifications. ? Provided up to date reports about status of assignment(s), schedules, budgets, delays, and adverse problems. ? Administered layout and detail design of facilities from P FD’s and P&ID’s. ? Processed modeling of equipment, piping and access ways. ? Prepared isometrics for checking and following P&ID’s ? Ensured to check isometrics and other piping drawings

  • 34 years in business
  • New on Thumbtack
About

I am accurate at doing my job and creating drawings for construction of Civil, Structural, Architectural or any other needed drawings.

  • New on Thumbtack
About

With my 20+ years of home design experience, I can offer you complete design and drafting services from preliminary design work to complete construction documents. I have a quick turn-around on completed plan sets. I am easy to work with and will ensure your satisfaction. If you have your own design, no problem! I will draw up your design for you and provide you with a professional looking plan set based on your design. Custom Home Plans has designed homes for locations all over Texas, from east to west, and all along the south coast. Cost of plans are based on an .80 cent per square foot charge for enclosed square footage. Please call for an appointment.

About

I offer custom house and building plans to go. I provide affordable building designs and building plans done right. I am an experienced and licensed architect and interior designer with over 25 years of design and AutoCAD drafting experience for architectural design, interior design, structural and MEP services at your service. * Complete design services and permit processing for custom and stock home plans, whole house and interior remodels, residential and commercial additions, new commercial construction, tenant improvements and build-outs, second story additions, garage conversions, covered Patios and Balconies. * Pride in quality and detail of design drawings while working with homeowners and other clients to make dreams and plans into reality. * Compliance with fire code and code violations, acting as your agent to walk your plans through the permit process. * Guidance through red tag problems for un-permitted additions or new construction; helping you with problems of existing foundations and structures, building flooding problems, and more. Inquiries from builders of custom and speculative homes or commercial buildings are welcome. Contact me for estimates of services, and your questions. -Don R. Cole, AIA, ASID

About

I offer CAD services, including architectural designs and permit drawings for the city, county, bank or homeowners' association.

  • New on Thumbtack
About

I am a freelancer in architectural and interior design. My profession is remodeling, interior design and new construction design. After receiving requests from the client, depending on the stage, the deliverable includes conceptual design with 3D illustrations, preliminary designs to construction drawings ready for builders to start the construction. My commitment is the eager, collaborative and flexible attitude in working with the client to reach the final satisfied and expected results. Thank you.

  • New on Thumbtack
About

We design commercial and residential buildings. We have 18 years of experience in drafting and design. We also have experience in oil and gas design. We are looking forward to working on your project.

About

I have more then 32 years of experience on doing layouts, assemblies, detailing and checking drawings for fabrication. I've worked with the Offshore Oil Industry and with lots of different mechanical design companies, like Offshore - Marathon LeTourneau, SBM and Aker Solutions. As for the mechanical side, I've worked for M&M-Mars, Applied Materials and APV Crepaco.

  • New on Thumbtack
About

I fo ud2D and 3D designs on Autodesk AutoCAD system, as well as mechanical designs (2D and 3D) and architectural designs. I am excellent at 2D layouts for floor plans and know basic in 3D renderings. I have a workforce certificate from Lone Star College.

About

We provide services for a wide range of applications including architectural, civil, electrical, HVAC, plumbing, detail drawings and document to CAD transfers, Need to see what your home will look like before it's built? We can create life like 3D drawings and you can tour the interior and exterior of your home to make final decisions, before you make that big investment. Click on 3d renderings tab to view our samples. Need someone to come out and take measurements for existing homes or office spaces for future projects? We can come out to your home or location and take measurements for future projects. Our company is highly versed in creating remarkable drawings. Whether you need professional drawings or someone to come out and take measurements for information on future projects. We take pride in our work . “Our plans are to keep you satisfied” Give us a call today so we can make plans to make plans!

Hire skilled professionals for absolutely everything.