Masonry professionals near Manteca, CA

On average, brick repairs will cost you around $500, with a range of between $350 and $600. However, be aware that a number of factors will have a large influence on this cost. First is the severity of the problem. Some brick repairs are as simple as applying new mortar — others require removing the brick entirely and fixing the substrate. If budget is a concern, contact several brick masons for cost estimates to find the best price in your area.

Because unsealed concrete is porous, it readily absorbs liquids, leading to unsightly stains and freeze-and-thaw cycle damage. For this reason, it’s important to seal concrete that will see spills or outdoor weather.

The best option for garage floors and other high-traffic areas is epoxy, which forms a hard and extremely durable surface on top of concrete. Epoxy, acrylic, and polishes are often used on indoor floors, while acrylic-resin sealers and reactive penetrating sealers are used on outdoor surfaces to repel water and salt. Locate a concrete contractor in your area to help find the best solution.

Paving contractors can be hired to install a concrete or asphalt driveway at your home, office or property. They can also repave an asphalt or concrete driveway that has been damaged by time, weather or heavy loads. When you are looking for a driveway contractor, request quotes from at least three professionals who are in good standing and have great customer reviews. They should do a site visit and write you a bid, detailing the work involved, materials needed, approximate length of the project and estimated cost.

The site for your new driveway will determine costs and the work required for your contractor. First, the ground must be excavated to lay a clear path. This means removing any trees, bushes and stumps. Next, the driveway contractor will grade the area, making a level surface for the concrete or asphalt. To ensure proper drainage, driveway contractors should install a sub-base of compacted gravel (or similar) 4 inches-8 inches deep, depending on your soil type. Then the concrete or asphalt may be poured and smoothed over the top. Your driveway contractor should recommend an appropriate sealant for your climate and advise you on curing time. When hiring a paving contractor, check out our tips for smart hiring on Thumbtack.

It depends. Sometimes, you might not require repair work — but you should still hire a professional to see if the cracks in your bricks are a serious threat to your home’s foundation and structural integrity.

Cracks (particularly larger cracks) can present a problem. If you have stair-step cracks or horizontal cracks, there may be an issue with your home’s foundation. Wider cracks can also allow water to infiltrate and cause damage from freezing and thawing. Insects can also enter wider cracks and cause more problems (and headaches).

If you have brick and stone repairs that need to be done, search for masonry services near you. Masons are skilled tradespeople and specialize in building and repairing stone, brick, concrete, tile and other similar materials on structures. They work with these materials as well as the mortar that holds them together and are the pro of choice when repairs are needed. 

Hire the right mason based on the repairs you need — some masons specialize in working with brick, concrete, natural stone or other materials.

A concrete paint cover is typically opaque and covers up the color of the concrete. This means it provides significant protection to the concrete below. However, if it is improperly applied or subjected to heavy traffic, a painted concrete floor is likely to chip and peel. 

Epoxy and staining are two types of concrete floor sealer. Epoxy is a more durable but often more expensive option than a concrete stain. Epoxy forms a protective layer, while concrete stain is more decorative and requires more maintenance. Because epoxy can be more expensive than concrete stain, it is best used in high-traffic areas or in applications where low maintenance is desired.

A concrete stain, on the other hand, is quick to apply and can show off the textures of the concrete, but it does not provide a high degree of protection for the concrete against spills, salt, water and other contaminants. Staining concrete generally requires a dust mop, a pH-neutral cleaner and water to clean, while epoxy can cause resin buildup that necessitates the use of special detergents.

Find a concrete contractor near you for help selecting the right floor concrete sealer.

A stone mason builds structures like buildings, walls and piers out of stone. They may use natural stone, pre-cut stone, slabs or other types of stone to get the job done. Other jobs stone masons take on include laying walkways, curbs, pizza ovens and other structures or landscaping works. It’s common to hire a stone mason to perform certain parts of home building, such as an interior or exterior stone wall.

Concrete contractors can build foundations, structures, driveways, concrete storm drains, raise or level concrete patios and much more. They can handle every step of the process, starting with framing the mold that the concrete is poured into. They then cut, assemble and tie together the rebar, giving the concrete its tensile strength. Finally, they pour the concrete in, mixing and conditioning it to ensure it cures properly. They will also take steps to ensure that no air pockets are trapped within it. 

If you have a project that requires the help of a concrete contractor, reach out to one today to get a price estimate.

Crumbling bricks, otherwise known as spalling bricks, can often be repaired. The process involves removing and repairing the damaged mortar, cleaning the surface and then also removing any damaged bricks to prevent the problem from spreading. Contact a brick mason near you to fix your crumbling bricks.

The best finish for concrete floors depends on your personal taste. An acid stain is a bold, varied look with lots of texture and the potential for earthy tones and a natural stone appearance. A water-based stain might not last as long as an acid stain, but it gives you the choice of many different colors. Epoxy is great for high-traffic areas, kitchens, bathrooms, basements and garages. It provides a glossy, damage-resistant, non-slip coating on your concrete floors. To find out which finish is the best for your concrete floors, contact a concrete contractor near you.